Airis Kira N9000 Firmware | Hot [repack]

I notice you're asking for firmware related to "Airis Kira N9000" — but I must clarify that I cannot develop, generate, or provide actual firmware files or binary code. Firmware is proprietary software tied to specific hardware, and distributing or creating unauthorized versions may violate copyright laws, manufacturer terms, or even local regulations.

However, I can help you understand what firmware is, how to find official firmware for the Airis Kira N9000, and how to safely flash it.

The Challenge: Finding the Right File

The Airis Kira N9000 is a generic device (often based on the MTK platform). Finding the correct firmware can be difficult because many models share the "N9000" designation, but the internal hardware may differ slightly.

If you are attempting to fix a bricked phone, you are likely looking for the MT6572 or similar MediaTek chipset drivers.

Part 2: Why the Airis Kira N9000 Is Prone to Firmware Heating Issues

The Airis Kira N9000 is built around a Rockchip RK3126 or Allwinner A33 SoC (depending on the batch), paired with 1GB of RAM and 16GB of storage. These low-power chipsets are not designed to generate intense heat—unless the firmware misconfigures their DVFS (Dynamic Voltage and Frequency Scaling) table.

4. Start Flashing

• Click Upgrade. The process takes 3–5 minutes.
• Do not disconnect the cable during writing.

Essay: Firmware, Overheating, and the Airis Kira N9000 — Causes, Risks, and Remedies

Introduction
Firmware bridges hardware and software: low-level code in devices like the Airis Kira N9000 that initializes components, manages power, controls radios, and runs device peripherals. Because it runs with high privilege and interacts directly with hardware, firmware bugs or poor design can cause malfunction and safety issues — including excessive heat (“hot” devices). This essay examines how firmware can cause overheating, why that matters for devices such as the Airis Kira N9000, how to diagnose and mitigate problems, and best practices for vendors and users.

1. How firmware controls temperature

• Power management: Firmware configures CPU/GPU frequencies, voltage scaling (DVFS), and sleep states; aggressive high-frequency settings or failure to downclock increase power draw and heat.
• Peripheral control: Radio modules (Wi‑Fi, cellular), sensors, cameras, and radios consume variable power; firmware that fails to idle or incorrectly polls hardware can keep peripherals active.
• Thermal policy and sensors: Firmware reads temperature sensors and enforces thermal throttling or shutdown. If sensor calibration or thresholds are wrong, the system may not throttle when needed.
• Task scheduling and watchdogs: Low-level scheduling can keep processors busy; interrupts or runaway background tasks triggered by firmware bugs cause sustained high CPU use.
• Firmware updates and compatibility: New firmware may change timings, drivers, or power profiles; if mismatched with hardware revisions it can produce instability or hotspots.

2. Common firmware-induced overheating scenarios

• Missing or miscalibrated thermal sensors so the device can’t detect or respond to rising temperature.
• Faulty DVFS implementation leading to sustained maximum clock/voltage.
• Driver bugs that abuse radios (continuous transmit/retry loops) or peripherals.
• Power-management sleep states disabled, preventing low-power idle.
• Boot loops or kernel panic recovery processes cycling repeatedly, generating heat.
• Background maintenance tasks (eMMC/flash operations, indexing) triggered too aggressively by firmware.
• Poorly tested update that introduces regressions for a hardware revision.

3. Risks and consequences

• Hardware damage: Prolonged overheating can degrade batteries, solder joints, and ICs.
• Safety hazards: Overheated batteries risk swelling, leakage, or in extreme cases thermal runaway.
• Reduced lifespan and reliability: Thermal stress accelerates component failure.
• Performance loss: Throttling reduces usable performance; user experience suffers.
• Data loss: Unexpected shutdowns or SD/eMMC corruption during writes.
• Warranty/support and legal implications for vendors if devices are unsafe.

4. Diagnosing firmware-related heating on the Airis Kira N9000 (practical checklist)

• Reproduce in controlled conditions: note ambient temperature, running apps, and connectivity.
• Identify patterns: heat during calls, Wi‑Fi use, charging, idle, or after a firmware update.
• Check for recent firmware/OS updates coinciding with the issue.
• Monitor CPU and radio usage: use available system tools or logcat (if Android-based) to spot processes keeping CPU/wifi active.
• Read thermal sensor logs (dmesg, kernel logs) for sensor values and throttling events.
• Safe battery inspection: if battery bulging or damage is present, stop using the device.
• Test with a clean boot / factory reset to rule out user-space apps; if overheating persists, firmware/driver level is suspect.
• Try older firmware (if available and safe) to see if issue regresses.

5. Mitigations for users

• Install official firmware updates from the vendor that mention thermal/power fixes.
• Avoid heavy workloads in hot environments; remove bulky cases that impede cooling.
• Disable unused radios (Bluetooth, GPS, mobile data) when not needed.
• Use battery-safe chargers and avoid wireless chargers that increase chassis heat.
• If overheating is new after an update, perform a factory reset, then monitor before restoring backups.
• Contact vendor support and provide logs, timestamps, and reproduction steps. If battery damage is suspected, stop using the device and seek repair.
• For developers/advanced users: capture logs (kernel, thermal, dmesg), use ADB/serial consoles, and monitor CPU frequency governors.

6. Remedies vendors should implement

• Robust thermal testing across hardware revisions and use cases before release.
• Conservative default power/thermal profiles with safe fallback thresholds.
• Sensor calibration and redundancy for accurate temperature monitoring.
• Throttling strategies: progressive frequency/voltage reduction, not abrupt shutdowns where avoidable.
• Telemetry (opt-in, privacy-respecting) to detect field thermal regressions quickly.
• Clear roll-back paths and signed firmware to avoid mismatched installs.
• Transparent release notes detailing power/thermal changes and rollbacks.

7. Firmware update best practices (safe approach)

• Incremental staged rollouts to a subset of devices and monitoring for regressions.
• Cryptographic signing, checksums, and recovery partitions to allow safe rollback.
• User-visible notes and an easy recovery method (reflash tool or service mode).
• Maintain downloadable stable firmware images and clear update instructions.

8. If you must flash firmware yourself (warnings)

• Only use vendor-provided, model-specific images matched to hardware revision.
• Back up data and battery-charge to ~50% before flashing.
• Use official flashing tools and follow step‑by‑step instructions.
• A mismatched or corrupted firmware image can brick the device or worsen heating; proceed only if you accept the risk.

9. Case-specific notes for the Airis Kira N9000 (assumptions and steps)

• Assumption: the Kira N9000 shares typical smartphone architecture (SoC with DVFS, radios, thermal sensors).
• Practical steps:
  1. Note when overheating occurs (charging, calls, idle, after update).
  2. Check for official firmware updates and vendor advisories; if present, apply them.
  3. Boot to safe/factory state; test thermals for 24–48 hours.
  4. Gather logs (system, kernel, thermal) and timestamps when overheating occurs.
  5. Contact vendor with logs and request a firmware rollback or patch if update coincides with issue.
  6. If vendor is unresponsive and device is unsafe, discontinue use and seek repair or replacement.

Conclusion
Firmware is a pivotal determinant of device temperature: misconfigurations, sensor issues, and driver bugs can create dangerous heating. Diagnosing whether overheating is firmware-driven requires logs, controlled testing, and comparing behavior across firmware versions and clean system states. Users should prioritize official updates, conservative usage, and vendor engagement; vendors must implement robust testing, monitoring, and safe update mechanisms. For the Airis Kira N9000 specifically, follow the checklist above: identify triggers, capture logs, try a clean factory state, and engage vendor support with evidence so they can supply a firmware fix or rollback.

If you want, I can:

• produce a step‑by‑step log collection checklist for the Kira N9000 (commands and where to find logs), or
• draft a concise bug report template you can send to Airis support with required logs and reproduction steps.

Subject: 🔥 HOT: Airis Kira N9000 Firmware Files Leaked / Released!

Body:

The wait is finally over for the Airis Kira N9000 community! After what felt like an eternity of radio silence from the manufacturer, the official firmware files for the Airis Kira N9000 have surfaced.

Whether you are looking to unbrick your device, roll back a buggy update, or simply perform a factory reset to restore peak performance, this is the download you’ve been waiting for.

📋 Key Details:

• Device: Airis Kira N9000
• File Type: Stock ROM / Firmware
• Status: Verified & Hot 🔥

⚠️ Important Notice: Flashing firmware carries inherent risks. Please ensure you have a full backup of your data before proceeding. We strongly recommend reading the installation guide thoroughly to avoid bricking your device. Use these files at your own risk.

[Download Link Here]

Huge thanks to the community members who tracked this one down. Let’s get testing!

Note: As an AI, I cannot provide direct download links for copyrighted firmware. Please check the official Airis website or authorized XDA/tech support forums for the actual files.

The Airis Kira N9000 is a classic "ultra-portable" netbook that originally hit the market as a budget-friendly way to browse the web and do light office work. While its official software lifecycle ended years ago, it remains a favorite for tech hobbyists who enjoy breathing new life into older hardware. The "Hot" State of N9000 Firmware

Because the original Android 2.1 or 2.2 operating systems are now largely obsolete for modern web standards, the community has stepped in with several "hot" alternatives:

Kirbian (Linux & Android): This is one of the most popular community projects. It provides specialized distributions of Linux and updated Android versions specifically tuned for the Airis Kira N7000, N8000, and N9000 series.

Flash Updates: Users often search for flash-ready firmware files on platforms like SourceForge or 4Shared to update their devices to a more stable or feature-rich state.

Android x86 Alternatives: Some users experiment with minimal touchscreen distros or lightweight versions of Android x86, though stability can vary depending on the specific build. Key Specifications to Keep in Mind

If you are planning to flash a new firmware, remember that the N9000 is built on modest hardware: Processor: ARM11 iMAPx210 @ 1.00 GHz. RAM: 256 MB DDR2 (requires extremely lightweight firmware). Storage: 2 GB NAND Flash. Display: 7-inch WVGA (800x480). Why Update?

Modernizing Apps: Newer firmware often allows the device to run later versions of basic apps that the original Android 2.1 can no longer support.

Bug Fixes: Official updates and community patches address stability issues and system crashes.

Educational Use: Many people use these updated netbooks as "weather centers," lightweight terminals for coding, or basic YouTube viewers in safe environments.

Warning: Always ensure you have the correct firmware for your specific model, as flashing the wrong version can brick the device. You can often find community-maintained files and instructions on SourceForge.

Are you looking to install a specific OS like Linux on your N9000, or are you just looking for a more stable Android version? airis kira n9000 free download - SourceForge airis kira n9000 firmware hot

Searching for reports on the Airis Kira N9000 firmware shows that users primarily look for updates or custom ROMs to improve performance, as the original Android firmware for these devices is now quite dated. Firmware & OS Options

There is no specific "hot" report indicating a widespread critical failure, but community projects like

provide alternative OS options for the N7000, N8000, and N9000 models, offering both Linux and Android distributions.

You can find available firmware files and community projects through these platforms: SourceForge Project (Kirbian)

: Hosts community-developed Linux and Android distributions for the Airis Kira N-series. Google Drive Mirror

: A direct link to a hosted firmware file specifically labeled for the N9000. General Troubleshooting

If you are looking at the firmware because your device is running "hot" (overheating) or performing poorly: Factory Reset

: Users often attempt a hard reset to clear performance-degrading bloatware, though instructions for specific Airis models vary. Legacy Updates

: Video guides exist for flashing updates manually to these older netbooks. Are you experiencing a specific technical error or looking for a way to the device? airis kira n8000 firmware free download - SourceForge

The Airis Kira N9000 is a legacy ultra-portable netbook/tablet hybrid known for its versatility and compact design. However, as software demands have evolved, many users search for "Airis Kira N9000 firmware hot" updates to resolve performance lag, app crashes, and system instability. Understanding the N9000 Firmware Needs

Updating the firmware is essential for keeping this aging hardware functional in a modern environment. Because Airis often used rebadged OEM chassis, finding the correct "hot" or latest official firmware can be challenging. Most users are looking for either the original Android image or more stable community-driven alternatives like Linux. Where to Find Firmware Updates

While the official Airis support site can be difficult to navigate for legacy products, several reputable community repositories host the necessary files:

Kirbian Project (SourceForge): This is one of the most popular sources for "hot" firmware for the N9000. It offers custom Linux and Android distributions specifically optimized for the Airis Kira N7000, N8000, and N9000 series.

Official Android Images: You can find the original Android 2.3 firmware or later community versions through archived Google Drive links shared by enthusiast forums. How to Flash the Firmware

The flashing process for the N9000 typically relies on the SD card method rather than a direct PC connection.

Prepare the Media: Use a high-quality SD card (formatted to FAT32). Download the firmware image and extract the files to the root directory of the card.

Ensure Power: Connect the N9000 to a reliable power source. A shutdown during the flash process can permanently brick the device.

Initiate the Flash: Insert the SD card into the powered-off device. Use the specific key combination (often Power + Menu or a dedicated reset button) to trigger the boot-from-SD mode.

Wait for Completion: The system will automatically detect the firmware and begin the update. Do not touch the device until the screen indicates the process is 100% complete. Troubleshooting Common Issues

If your N9000 is running "hot" or crashing frequently, consider these tips before a full firmware flash:

Resource Management: Uninstall unnecessary background apps that may be consuming excessive CPU cycles.

Storage Space: Ensure at least 10–15% of the internal storage is free to prevent system slowdowns.

Factory Reset: If the device is lagging but functional, a simple factory reset from the settings menu may resolve software conflicts without needing a new firmware image. Airis Kira N9000 Firmware - Google Drive 🖱️ Airis Kira N9000 Firmware - Google Drive. Google Docs Airis Kira N9000 Firmware - Google Drive 🖱️ Airis Kira N9000 Firmware - Google Drive. Google Docs airis kira n9000 free download - SourceForge

Unleashing the Full Potential: A Deep Dive into Airis Kira N9000 Firmware

In the world of smartphones, firmware plays a crucial role in determining the overall user experience. A well-crafted firmware can elevate a device from being mediocre to exceptional, and the Airis Kira N9000 is no exception. This feature-rich smartphone has been making waves in the market, and its firmware is a significant contributor to its success. In this article, we'll take a closer look at the Airis Kira N9000 firmware, exploring its features, benefits, and what makes it stand out from the competition.

Overview of Airis Kira N9000

The Airis Kira N9000 is a high-end smartphone that boasts an impressive array of specifications, including a large display, powerful processor, ample storage, and advanced camera capabilities. However, it's the firmware that truly sets this device apart, providing a seamless and intuitive user experience. I notice you're asking for firmware related to

Key Features of Airis Kira N9000 Firmware

The Airis Kira N9000 firmware is built on top of a customized version of Android, offering a unique blend of features and functionalities. Some of the key features of this firmware include:

1. Enhanced User Interface: The firmware offers a clean and intuitive interface, with customizable themes, icon packs, and wallpapers. The UI is designed to be visually appealing, with smooth animations and transitions.
2. Advanced Camera Capabilities: The firmware includes a range of camera features, such as manual mode, HDR, and 4K video recording. The camera app is user-friendly, allowing users to easily switch between modes and adjust settings.
3. Performance Optimization: The firmware is optimized for performance, with advanced power management and resource allocation. This results in smooth performance, even with demanding tasks and multitasking.
4. Security Features: The firmware includes a range of security features, such as fingerprint recognition, facial recognition, and encryption. These features provide an additional layer of protection for users' personal data.
5. Customization Options: The firmware offers a range of customization options, including the ability to customize the notification shade, quick settings, and gesture navigation.

Benefits of Airis Kira N9000 Firmware

The Airis Kira N9000 firmware offers a range of benefits, including:

1. Improved Performance: The firmware's performance optimization features ensure that the device runs smoothly, even with demanding tasks and multitasking.
2. Enhanced User Experience: The firmware's intuitive interface and customization options provide a personalized user experience, making it easier for users to navigate and enjoy their device.
3. Advanced Security: The firmware's security features provide an additional layer of protection for users' personal data, giving them peace of mind.
4. Regular Updates: The firmware is regularly updated, ensuring that users have access to the latest features, security patches, and performance enhancements.

What Makes Airis Kira N9000 Firmware Stand Out

The Airis Kira N9000 firmware stands out from the competition in several ways:

1. Customization Options: The firmware offers a wide range of customization options, allowing users to personalize their device to suit their preferences.
2. Performance Optimization: The firmware's performance optimization features ensure that the device runs smoothly, even with demanding tasks and multitasking.
3. Advanced Security Features: The firmware's security features provide an additional layer of protection for users' personal data, giving them peace of mind.

Conclusion

The Airis Kira N9000 firmware is a key factor in the device's success, providing a seamless and intuitive user experience. With its range of features, benefits, and customization options, this firmware is sure to impress even the most discerning users. Whether you're looking for a device with a powerful processor, advanced camera capabilities, or robust security features, the Airis Kira N9000 firmware has got you covered.

Post:

Title: Seeking Airis Kira N9000 Firmware Update Guidance

Content: I'm reaching out for help with updating the firmware on my Airis Kira N9000 tablet. I've been experiencing [mention any issues you're facing, e.g., performance issues, app crashes, etc.]. I've tried checking the official Airis website but couldn't find any recent updates or clear instructions on how to proceed.

Could anyone guide me on:

1. Where to find the latest firmware for the Airis Kira N9000?
2. A step-by-step guide on how to safely update the firmware?
3. Any recommendations for backing up my data before the update?

Any help, including pointing me towards forums or support pages, would be greatly appreciated. Thanks in advance for your assistance!

The Airis Kira N9000 is a legacy netbook/smartbook from the early 2010s, often remembered for its ultra-portable 9-inch form factor and ARM-based architecture. While the original software is now quite aged, a "hot" firmware update—often referring to community-driven projects like Kirbian—can significantly revitalize this vintage machine. Key Features of a Revitalized Airis Kira N9000

Updated Operating System Support: While originally shipping with Android 2.1 or 2.2, modern community firmware allows users to run lightweight Linux distributions such as Kirbian, which is specifically tailored for the N7000, N8000, and N9000 series.

Hardware Efficiency: The device is powered by an ARM11 iMAPx210 processor clocked at 1.00 GHz. Modern "hot" firmware focuses on extreme optimization to handle the limited 256 MB of DDR2 RAM.

Storage Management: Firmware updates address the constraints of the 2 GB NAND Flash internal storage, often enabling better support for external SD/SD-HC cards to expand usable space.

Enhanced Connectivity: Updates often include improved drivers for the 802.11bg WLAN and Ethernet (RJ-45) ports to maintain compatibility with modern network configurations.

Functional Utilities: A fresh firmware flash typically includes essential lightweight software for web browsing, PDF reading, and multimedia playback, turning the device into a dedicated distraction-free writing tool or basic media hub. Technical Specifications Recap Specification Display

9-inch (often listed as 7" in older technical docs) TFT WVGA (800x480) Processor ARM11 iMAPx210 @ 1.00 GHz Memory 256 MB DDR2 Storage 2 GB NAND Flash Weight Approximately 0.66 Kg

Before attempting a firmware update, it is critical to back up any existing data and ensure you have the correct Airis Kira N9000 Firmware file, as flashing the wrong version can brick the device. airis kira n9000 free download - SourceForge

Airis Kira N9000 is an ultra-portable, low-cost netbook that originally gained popularity as a promotional item or budget entry-level device. Reviewing its current status—specifically regarding "hot" or popular firmware updates—reveals a device that is now primarily a hobbyist project rather than a daily driver. 🚀 Direct Review Summary The "hot" firmware for the Airis Kira N9000

isn't a single official update, but rather the community-driven Kirbian project . Official support for this Android-based netbook has long since ended, and the original Android 4.0 (Ice Cream Sandwich) experience is now obsolete for modern web browsing. The most viable "hot" update today is a specialized Linux or optimized Android build that attempts to squeeze functionality out of its limited 1GHz processor and 512MB of RAM . 🛠️ Firmware & Software Performance

typically ships with a very limited version of Android. Users frequently seek new firmware to fix "boot loops" or to access a more desktop-like environment.

Kirbian (Debian-based Linux): This is the most popular community firmware. It transforms the netbook into a basic Linux machine, which is significantly better for productivity than the original mobile-focused Android .

Android 4.0.3/4.0.4 "Dumps": Many "hot" links online are simply factory image restores used to unbrick devices that are stuck on the loading screen Performance Reality: Even with updated firmware, the

struggles with modern video playback (YouTube) and heavy websites due to its hardware limitations . 🏗️ Hardware Specifications

Understanding the hardware is key to knowing why certain firmware is "hot" (or why it might cause overheating). Processor: 1GHz ARM11 or similar low-power chip. RAM: 512 MB (extremely limiting for modern apps). Click Upgrade

Storage: Typically 4GB internal flash, expandable via SD card.

Connectivity: Wi-Fi (often weak), 3 USB ports, and an Ethernet port . Display: 9-inch screen with 800x480 resolution. ⚠️ Critical Risks & Tips

Updating the firmware on this specific model carries a high risk of "bricking" (making the device unusable).

Battery Power: Never update without the charger plugged in; if the battery dies mid-flash, the device is often permanently broken SD Card Compatibility: Most firmware updates for the

require a specific "burning" tool like WinImage to create a bootable SD card .

Heat Issues: The "hot" in your query may refer to temperature. These netbooks lack active cooling (fans). Running modern firmware or heavy apps can cause the bottom of the casing to become uncomfortably warm. 📥 Where to Find Firmware

Since the official Airis support pages are largely defunct, community mirrors are the only source:

SourceForge (Kirbian Project): The primary hub for Linux-based firmware .

YouTube Tutorials: Often contain links to MediaFire or Mega mirrors for original Android "dumps" .

💡 Key Point: This device is best used today for retro gaming emulation, basic text editing, or as a learning tool for Linux terminal commands. If you'd like, I can help you find: The step-by-step instructions for flashing Kirbian. A list of lightweight apps that still work on Android 4.0. Troubleshooting steps if your is currently stuck on the logo screen. Let me know how you want to proceed with your netbook. flash update mise a jour android airis kira n7000 n9000

update mise a jour android airis kira n7000 n9000 télécharger firmware ... download.htm DUMP COMPUTER https://www.eeprombuy.com YouTube·INFO POUR VOUS airis kira n8000 firmware free download - SourceForge

The Airis Kira N9000 is an ultra-portable netbook originally released around 2011, primarily in Spanish markets. Given its age, most "hot" or modern firmware discussions center on reviving these devices using alternative operating systems or modified Android distributions to make them functional today. Current Firmware Landscape

As of April 2026, finding official support is difficult as the manufacturer has long since moved on. Users typically seek firmware for two main reasons:

Restoration: Reinstalling the original Android or Linux-based OS if the system has become corrupted.

Modernization: Flashing custom ROMs or lightweight Linux distros (like specialized versions of Debian or Lubuntu) to handle basic modern web tasks. Critical Performance Review

If you are planning to update or "re-heat" an N9000 with a firmware flash, here is what you can realistically expect: ⚡ Stability & Speed

Original Firmware: Extremely sluggish by modern standards. The ARM11 processor (often clocked at 1GHz or less) struggles with most current web encryption.

Custom Firmware: Some users have had success with "lite" Android 2.3 or 4.0 builds. These improve menu snappiness but do not magically make the hardware powerful enough for YouTube or heavy multitasking. 🌐 Connectivity Issues

Wi-Fi Reliability: A common complaint in firmware reviews is the dropping of Wi-Fi signals. Some custom builds include improved drivers that provide a more stable connection.

WPA3 Support: The hardware typically cannot support modern WPA3 security, so you may need to adjust your router settings to allow the N9000 to connect. 🔋 Battery & Power

Management: Newer "hot" firmware tweaks often improve the standby time by better managing the processor's clock speed when idle.

Risk: Flashing firmware on these older devices carries a high risk of "bricking" if the battery dies during the process. Always keep it plugged into a stable power source. ⚠️ Pro-Tip for Flashing

Most N9000 firmware updates are performed via an SD card. You typically: Download the .img or folder structure. Copy it to the root of a FAT32-formatted SD card.

Insert it and hold a specific key combination (often Power + Menu or similar) to trigger the "hot" update. If you'd like to proceed, let me know:

In the bustling tech bazaars of Shenzhen, a curious device appeared on online marketplaces around 2015. It was called the Airis Kira N9000. To the untrained eye, it looked like a miniature laptop from the future—a clamshell device with a full QWERTY keyboard and a small, vibrant screen. But it wasn't a laptop. It was an MP4 player, a dying breed of gadget trying to reinvent itself.

The Kira N9000 promised a nostalgic trifecta: music, video, and e-books, all controlled by those satisfying physical keys. It was cheap, quirky, and for a brief moment, a cult favorite among teens who wanted to type notes in class without the distraction of a smartphone.

But then, the glitches began.

2. Enter MaskROM Mode on N9000

• Power off the tablet completely.
• Press and hold Volume Down (or sometimes Volume Up), then connect to PC via USB.
• Release the button after 5 seconds. The PC should detect Rockchip USB Device or MSC Device.