Aovo Pro Firmware B-01.0.11k !!install!! Download May 2026

The B-01.0.11k firmware for the Go to product viewer dialog for this item.

(typically the ES80/M365 clone) is a legacy version highly sought after by the enthusiast community because it lacks the strict speed limiters found in newer updates. While official sources often push users toward the newest versions, the 11k version is specifically used to unlock top speeds of up to 28-31 MPH (45 KM/H). How to Access and Download B-01.0.11k

You cannot typically find this firmware in the standard "AOVOPro" app (black icon). Instead, users rely on an alternative app interface to "downgrade" or select specific versions.

Required App: Download the 365GO App (often identified by a blue icon).

The "10% Glitch" Method: Some users report that to see the 11k version, you must start a different firmware update and close the app at exactly 10% completion. Upon reopening, the list of "Available Versions" may refresh to include B-01.0.11k.

Alternative Tools: For advanced users, the Smartphone Flash Tool can be used to flash stock ROMs directly via a PC connection, though this carries higher risk of bricking the device. Performance & Configuration

Once B-01.0.11k is installed, you must manually adjust the settings to realize the speed increase:

Speed Settings: Navigate to Advanced Settings -> Speed Limit Value. This firmware allows you to set the limit as high as 45 KM/H (approx. 28 MPH). Aovo Pro Firmware B-01.0.11k Download

Known Bug: This specific firmware version often has a bug where the scooter’s headlight can only be toggled through the app, as the physical button may stop responding. Important Precautions

Hardware Limits: The Aovo Pro uses a 350W motor and a 36V battery. Consistently running at unlocked speeds can lead to overheating, reduced battery lifespan, or motor failure.

Password: If prompted for a password during the app connection, the default is frequently 888888.

Warranty: Flashing non-standard or older firmware usually voids the manufacturer's warranty and may be restricted by newer "locked" hardware versions. AOVO Pro no firmware available in app. : r/ElectricScooters

Aovo Pro Firmware B-01.0.11k has become a cult favorite among electric scooter enthusiasts specifically because it is widely regarded as the "speed unlock" version for the Aovo Pro (often considered a Xiaomi M365 Pro clone). Why People Hunt for B-01.0.11k

Most standard firmware versions for the Aovo Pro cap the speed at roughly 31 km/h (19 mph) . This specific firmware, however, is known to: Unlock Higher Speeds : Users report that installing B-01.0.11k can unlock a 45 km/h (28 mph) option in advanced settings. Disable Recovery (KERS)

: Unlike some other versions, this one typically disables regenerative braking (recovering energy back into the battery), allowing for better "coasting" (freewheeling) when you let off the throttle. Address Specific Bugs The B-01

: While it unlocks speed, it is known to have a "glitch" where the lights can only be controlled via the app rather than the physical button on the scooter. How to Download and Install Because the official AovoPro app

(Black Icon) often hides this version to stay compliant with local speed regulations, users frequently use a workaround method: Download the "365GO" App : This is an alternative app (Blue Icon) available on the Apple App Store or Google Play that often displays more firmware options. The "Interruption" Trick Open the 365GO app and go to Settings > Firmware Upgrade Select any available version to start the update. When the progress reaches approximately

, close the app entirely. This leaves the scooter in a "firmware update mode". Reopen the app, and B-01.0.11k should now appear in the "Available Versions" list. Finalize the Speed : Once installed, navigate to Advanced Settings > Speed limit value and change it to the new maximum. Critical Risks to Consider Safety & Hardware Limits

: Boosting a scooter to 28 mph on hardware designed for 19 mph can lead to overheating or battery degradation. Power Cycling Glitch

: Some users report that after installing B-01.0.11k, the scooter may automatically turn itself back on immediately after you try to power it off. Legal Compliance

: Exceeding local speed limits for electric scooters can lead to fines or the scooter being impounded in certain regions.

Preparation

  1. Check Device Compatibility: Ensure that your device is indeed an Aovo Pro and that you need to update its firmware. Not all updates are necessary or compatible with every device. Check Device Compatibility : Ensure that your device

  2. Understand the Risks: Firmware updates can sometimes go wrong, leading to device malfunction. Make sure you understand the risks and ensure you have a way to troubleshoot or repair your device if something goes wrong.

  3. Charge Your Device: Ensure your Aovo Pro is fully charged before beginning the update process. Interrupting the update with a power loss could render your device unusable.

  4. Download and Install Necessary Software:

    • You'll likely need a computer (Windows, macOS, or Linux) for this process.
    • Depending on the manufacturer's instructions, you might need specific software. Usually, this involves a program designed for updating firmware.

What is Aovo Pro Firmware B-01.0.11k?

Firmware is the low-level software embedded in your Aovo Pro scooter’s electronic control unit (ECU). The version number B-01.0.11k follows a proprietary naming convention used by Aovo’s OEM manufacturer (often based in Shenzhen, China). Decoding the name:

This firmware is specifically designed to optimize the Aovo Pro’s performance, safety features, and battery efficiency. It is not compatible with generic Xiaomi M365 scooters or Ninebot models, despite physical similarities.

Final Verdict: Should You Download B-01.0.11k?

If your Aovo Pro is currently running a firmware older than version 10 (e.g., B-01.0.06 or B-01.0.08k), then yes – install B-01.0.11k immediately. The improvements in throttle feel, battery accuracy, and safety (improved electronic braking) are substantial.

However, if your scooter already works flawlessly and you are on B-01.0.10j, the changes in 11k are incremental. You can wait for the next major release.

Safe downloading summary: