Skip to main content

Bamboo Cth-670 Driver Windows 10 May 2026

The Wacom Bamboo Create (CTH-670) is a legacy device, and official support for it has ended. This means the latest Wacom drivers often will not recognize this specific model on Windows 10.

To get your CTH-670 working, you can either use the last known compatible legacy driver or a community-made alternative. Option 1: Official Legacy Driver (Recommended First)

The most stable official driver for the Bamboo CTH-670 on Windows 10 is version 5.3.5-3.

Preparation: Unplug your tablet and uninstall any existing Wacom software from your PC.

Clean Up: Open File Explorer, go to C:\Program Files, and delete the Tablet folder if it remains. If files are locked, use Task Manager to end any "Wacom" or "Tablet" processes.

Install: Download and run the pentablet_5.3.5-3.exe installer.

Compatibility Mode: If the installer fails, right-click the .exe file, select Properties > Compatibility, and check "Run this program in compatibility mode for" and select Windows 7.

Restart: Reboot your computer before plugging the tablet back in. Option 2: OpenTabletDriver (Alternative)

If the legacy driver does not work or causes lag, the community-supported OpenTabletDriver is a popular alternative for legacy hardware. Website: You can find it at OpenTabletDriver.net.

Benefits: It often provides better performance on modern Windows versions than the official legacy drivers and doesn't require a restart. Troubleshooting Common Issues

The Wacom Bamboo Create (CTH-670) is a legacy device that is no longer supported by the latest Wacom drivers. However, it remains fully functional on Windows 10 if you use specific older driver versions or community-developed alternatives. Recommended Driver Versions

To get your CTH-670 working, you must avoid the "latest" drivers found on Wacom's main landing page. Instead, use one of the following:

Official Legacy Driver (5.3.5-3): This is the most widely recommended official version for Windows 10. It supports features like pressure sensitivity and touch. You can find it on the Wacom Support Drivers Page under the "Drivers for Previous Generation Products" section.

OpenTabletDriver (Community Alternative): If official drivers fail or you want deeper customization, many users recommend OpenTabletDriver. It is a high-performance, open-source alternative that supports legacy Bamboo hardware. Step-by-Step Installation Guide

If you previously installed a newer driver, the old driver will likely fail to install or recognize the tablet. Follow these steps for a clean installation:

Uninstall Previous Drivers: Go to Control Panel > Programs and Features and uninstall any entries for "Wacom Tablet" or "Bamboo".

Clean Remaining Files: Navigate to C:\Program Files and delete the "Tablet" folder if it remains.

Wacom Utility (Optional but Recommended): Use the Wacom Tablet Preference File Utility to click Remove under "All User Preferences".

Restart: Reboot your computer to ensure all services are fully stopped.

Install Legacy Driver: Run the pentablet_5.3.5-3.exe installer.

Connect Tablet: Plug in the CTH-670 only after the driver installation is complete and you have restarted again. Common Troubleshooting

Pen Registers as a Mouse: If your pen works but lacks pressure sensitivity, the driver may not be running. Search for Wacom Preferences in your Start menu; if it says "supported tablet not found," you likely have a driver conflict.

Windows Ink Issues: If you experience "rings" or lag while drawing, go to Wacom Tablet Properties and toggle the Windows Ink setting under the Mapping tab.

Device Manager Check: If the tablet doesn't power on, right-click the Start icon, open Device Manager, and check under "Human Interface Devices" to see if the Wacom device is listed or has an error icon.

Are you experiencing a specific error message or is the tablet simply not responding to pen pressure? bamboo cth-670 driver windows 10

To get your Wacom Bamboo Create (CTH-670) working on Windows 10, you must use an older driver because newer Wacom software has dropped support for this model. Correct Driver for Windows 10 The last official driver compatible with the on Windows 10 is version 5.3.5-3 . You can find this by: Visiting the Wacom Drivers Support page Scrolling down to the "Drivers for Previous Generation Products" Searching for and downloading Driver 5.3.5-3 for Windows. How to Install (Step-by-Step) If you have already tried installing a newer driver, you

perform a clean uninstall first, or the tablet will not be recognized. Uninstall Old Drivers: Control Panel > Programs and Features , uninstall any existing "Wacom" or "Bamboo" entries, and your computer. Clean Remaining Files: C:\Program Files and delete the folder if it still exists. Install Version 5.3.5-3: Run the downloaded installer ( pentablet_5.3.5-3.exe ) and follow the prompts Connect Tablet: Plug in your the installation or when prompted.

A final restart is often required for the driver to initialize properly. Troubleshooting Tips

Blog Post: Getting Your Wacom Bamboo CTH-670 Running on Windows 10 If you’ve pulled your trusty Wacom Bamboo Create (CTH-670)

out of storage only to find it acting like a basic mouse—or not working at all—on Windows 10

, you aren't alone. This "legacy" tablet is officially discontinued, but it still has plenty of life left if you use the right software.

Here is how to get those pen pressure settings and customizable buttons back. 1. The "Magic" Driver Version: 5.3.5-3

The most common mistake is downloading the absolute latest Wacom driver. Modern drivers often don't support the Bamboo series. For the , the community-vetted stable version for Windows 10 is Driver 5.3.5-3 Official Source:

You can typically find this by searching for "CTH-670" in the Wacom Product Support search bar. Direct Download: Many users rely on the direct legacy link provided by Wacom's CDN 2. A Clean Slate (Crucial Step)

Old driver leftovers are the #1 cause of "Tablet not found" errors. Before installing anything new: your tablet. Programs and Features and uninstall any existing "Wacom" or "Bamboo" entries. your computer. (Advanced) Some users recommend deleting the C:\Program Files if it remains. 3. Installation & Compatibility Mode If the installer fails, try running it in Compatibility Mode Right-click the pentablet_5.3.5-3.exe Properties Compatibility

Check "Run this program in compatibility mode for" and select Run the installer as an Administrator 4. Troubleshooting "Driver Not Found"

If you get a "tablet driver not found" message after installing:

Bringing the Wacom Bamboo CTH-670 Back to Life on Windows 10

If you’ve got a Wacom Bamboo Create (CTH-670) sitting in a drawer because you thought it was "too old" for Windows 10, don't give up on it yet. While Wacom has officially ended support for this legacy model, it is still a fantastic piece of hardware that works perfectly with the right software setup. 1. Find the "Magic" Driver

The most critical part of this process is using the correct legacy driver. Modern Wacom drivers won't recognize the CTH-670. The Version You Need: Look for Driver 5.3.5-3.

Where to Get It: You can find it on the official Wacom Support Page under the legacy section for Bamboo tablets.

Compatibility: This specific version was the last one designed to support the Bamboo Pen & Touch series on Windows 10. 2. A Clean Slate (Pre-Installation)

Windows often tries to "help" by installing generic drivers that can clash with Wacom’s software. Before installing the new driver, follow these steps: Disconnect the tablet from your computer.

Uninstall any existing "Wacom," "Bamboo," or "Tablet" software through the Windows Control Panel.

Clear the Cache: Go to C:\Program Files and delete the Tablet folder if it remains.

Restart your computer to ensure all background services are fully stopped. 3. Installation & Compatibility Mode

Sometimes the installer needs a little nudge to believe it's running on an older system.

Right-click the downloaded driver file (pentablet_5.3.5-3.exe) and select Properties.

Under the Compatibility tab, check "Run this program in compatibility mode for" and select Windows 7. Run the installer as an Administrator. The Wacom Bamboo Create (CTH-670) is a legacy

Connect the tablet only after the installation finishes and you have restarted your PC. 4. Troubleshooting Common Issues

If your pen isn't moving the cursor or the "Wacom Tablet Properties" says no device is connected:

Check the Light: A blue light indicates power; it should turn white when the pen is near the surface.

Restart Wacom Services: If the tablet stops responding, open Services (type services.msc in Start), find Wacom Professional Service, right-click it, and select Restart.

Disable Windows Ink: If you notice weird "circles" or lag in Photoshop, open the Wacom Tablet Properties and uncheck Use Windows Ink under the Mapping tab.

Is your CTH-670 still acting up? Tell me what light color you see on the tablet, and I can help you pinpoint the issue.

For users of the Wacom Bamboo Create (CTH-670) , finding the right driver for Windows 10 can be tricky because newer Wacom software often drops support for legacy hardware. While Wacom's latest universal drivers support most modern tablets, older Bamboo models typically require a specific legacy version to function correctly on newer operating systems. The Best Driver for Bamboo CTH-670 on Windows 10 The most stable and compatible driver version for the Bamboo CTH-670

on Windows 10 is Driver 5.3.5-3. This specific legacy driver was designed for the Bamboo line and remains the primary choice for ensuring pen pressure and multi-touch gestures work as intended. Version: 5.3.5-3 RC WHQL Release Date: August 2014

Compatibility: Windows 10 (32-bit and 64-bit), Windows 8.1, and Windows 7 How to Install the Driver on Windows 10

To avoid "Tablet not found" errors or pen lag, follow this clean installation process:

Remove Existing Drivers: Open the Control Panel, navigate to Programs and Features, and uninstall any currently installed Wacom or Bamboo software.

Clear Preference Files: Use the Wacom Tablet Preference File Utility to "Remove" all user preferences to ensure no old settings interfere with the new install.

Restart Your PC: This is a critical step to ensure all background services are stopped.

Download and Install: Locate Driver 5.3.5-3 on the Wacom Product Support Page by searching for "

Run with Compatibility Mode: If the installer fails, right-click the .exe file, select Properties, go to the Compatibility tab, and select "Run this program in compatibility mode for Windows 7" . Reconnect the Tablet: Plug your

into a USB port once the installation is complete and the system has been restarted again. Troubleshooting Common Issues

To get your Wacom Bamboo Create (CTH-670) working on Windows 10, you'll need the legacy driver version 5.3.5-3. Since this device is no longer officially supported with the newest updates, newer drivers won't recognize it. Download and Installation Steps

Download the Driver: Visit the Wacom Product Support Drivers page and search for or download the specific file pentablet_5.3.5-3.exe. Clean Uninstall: Unplug your tablet.

Go to Control Panel > Programs and Features and uninstall any existing "Wacom Tablet" or "Bamboo" entries. Restart your computer. Install: Run the pentablet_5.3.5-3.exe installer.

Connect your tablet only after the installation is complete.

Fix "Driver Not Found" Errors: If the tablet still isn't recognized, use the Wacom Tablet Preference File Utility to click Remove under "All User Preferences". Common Windows 10 Troubleshooting

Disable Windows Ink: If you experience "lag" or weird circles when drawing, open Wacom Tablet Properties, go to the Mapping tab, and uncheck Use Windows Ink.

Compatibility Mode: If the installer fails, right-click the .exe file, select Properties > Compatibility, and run it for Windows 7 or Windows 8.

Restart Driver Service: If the tablet stops responding, you can restart the driver without rebooting by typing services.msc in Windows Search, finding Wacom Professional Service, and clicking Restart. The Core Problem: Wacom’s Legacy Support Gap Wacom’s

Are you running into a specific error message during the installation process? AI responses may include mistakes. Learn more Bamboo CTH-670 refuses to work (Windows 10) : r/wacom

The Wacom Bamboo Create (CTH-670) is a legacy device officially discontinued over a decade ago. While Wacom no longer provides official technical support or active updates for this model, it remains a highly capable piece of hardware that can still function perfectly on Windows 10 with the correct driver configuration. The "Golden" Driver: Version 5.3.5-3

The most critical takeaway for CTH-670 users is that later, "universal" Wacom drivers often do not recognize this legacy hardware. The industry-consensus driver for maintaining full functionality (including pressure sensitivity and touch) on Windows 10 is version 5.3.5-3.

Download Source: You can typically find this in the Wacom Driver Archive by searching specifically for "CTH-670" rather than downloading the first result on the page.

Key Features Restored: When correctly installed, this driver restores the Wacom Preferences menu, allowing you to map the tablet to specific monitors and customize the ExpressKeys. Step-by-Step Installation Guide

Windows 10 often tries to "help" by installing generic HID drivers that only allow the pen to act as a basic mouse without pressure sensitivity. To fix this, follow a "clean" installation path: Preparation: Unplug the tablet from your PC.

Removal: Go to Control Panel > Programs and Features and uninstall any existing "Wacom" or "Bamboo" entries.

Clean Up: Open Device Manager, expand "Human Interface Devices," right-click any Wacom-related entries, and select Uninstall Device.

Restart: This is vital to clear the system registry of old tablet settings.

Install: Run the pentablet_5.3.5-3.exe installer. If it fails, right-click the file, select Properties > Compatibility, and run it in "Windows 7 Compatibility Mode".

Connect: Plug the tablet back in only after the installation and another restart. Common Troubleshooting CTH-670 not working.. weird thing. #31 - GitHub

Wacom Bamboo Create (CTH-670) , the official driver compatible with Windows 10 is version . Newer Wacom drivers (6.4.x series) generally do support the Bamboo line. Download and Installation Official Driver: Download version Wacom Support Page Alternative Source:

If the main search is difficult, it is also listed on regional sites like Wacom Russia TousLesDrivers File Name: PenTablet_5.3.5-3.exe Step-by-Step Installation Guide Uninstall Old Drivers: Control Panel > Programs and Features and remove any existing "Wacom Tablet" or "Bamboo" entries.

You must restart your computer after uninstallation to clear system files. Install New Driver: PenTablet_5.3.5-3.exe

file. If you encounter issues, right-click the installer and select "Run as administrator" Compatibility Mode for Windows 7. Connect Tablet: Plugin your CTH-670 via USB only the installation or when prompted. Configure Preferences:

Open "Wacom Preferences" from the Start menu to customize pressure sensitivity and touch gestures. Troubleshooting Tips "Driver Not Found":

If the Wacom Center says no device is connected, ensure you are using the older 5.3.5-3 driver; newer versions will not recognize the CTH-670. Touch Functionality:

This specific driver is critical for enabling multi-touch gestures on the Bamboo Create.

If the device isn't recognized, try a different USB port directly on the motherboard rather than a hub. Do you need help configuring specific shortcuts or mapping the tablet to a dual-monitor setup

Драйверы для графического планшета - Wacom

The Core Problem: Wacom’s Legacy Support Gap

Wacom’s modern driver series (e.g., version 6.4.x) is designed for Intuos Pro, One, and newer Bamboo models. These do not support the older CTH-670. Conversely, the last official driver released for the CTH-670 series was version 5.3.5-3 (circa 2015), intended for Windows 7 and 8.

When you install this old driver on Windows 10, several issues emerge:

Problem B: Pen works, but Touch/Scrolling does not.

Part 7: Future-Proofing – Will It Work on Windows 11?

As of 2024-2025, the same Bamboo CTH-670 driver v5.3.5-3 that works on Windows 10 also works on Windows 11, provided you follow the same "Disable Driver Signature Enforcement" ritual. However, Microsoft is gradually tightening security. OpenTabletDriver is likely the long-term solution.

Step 1: Understanding the Driver Landscape

Windows 10 may automatically install a basic HID-compliant driver, recognizing the tablet as a mouse. This allows pointer movement but disables pressure sensitivity, express keys, and touch gestures. To restore full functionality, the legacy driver (v5.3.5-3 for 64-bit Windows, or v5.2.6-5 for 32-bit) is required.

Step 2: Preparation – Removing Conflicting Drivers

Before installing, uninstall any existing Wacom drivers:

  1. Open Settings > Apps and uninstall “Wacom Tablet” or “Bamboo”.
  2. Run the cleanup utility from Wacom’s support site (optional but recommended).
  3. Restart Windows 10 with driver signature enforcement temporarily disabled (hold Shift while clicking Restart, then go to Troubleshoot > Advanced Options > Startup Settings > Disable driver signature enforcement).

Conclusion

While the Wacom Bamboo CTH-670 is no longer plug-and-play on Windows 10, a precise, manual installation of driver v5.3.5-3 restores full functionality. The process requires disabling driver signature enforcement temporarily and blocking automatic updates, but the result is a fully working tablet that remains relevant for digital art and note-taking years after its release.