Baofeng Uv-10r Programming Software May 2026

The Baofeng UV-10R Go to product viewer dialog for this item.

is widely programmed using CHIRP, a free, open-source tool that supports many Baofeng models. While the UV-10R is not always listed by its exact name, users often have success selecting similar models like the Go to product viewer dialog for this item. or Go to product viewer dialog for this item. within the software to establish a connection. 🛠️ Essential Software & Tools

CHIRP Next: The most reliable third-party software for Baofeng radios.

Official Baofeng CPS: Often harder to find but available via the Baofeng download page.

Baofeng Ola App: A mobile option for wireless programming if you have a compatible Bluetooth dongle.

Programming Cable: A high-quality cable (ideally with an FTDI chip) is required to avoid driver issues. 💡 Configuration Tips Does the UV-21R have programming software? - Facebook

4. Step-by-Step Programming (Software)

Prerequisites:

• Windows PC (7/10/11, 32 or 64-bit). May work on Linux via Wine but not officially.
• Correct driver installed (check Device Manager → Ports COM & LPT).
• Radio turned ON, volume at ~half, cable plugged into radio and USB.

Procedure:

1. Install the Baofeng UV-10R CPS (run as Administrator if on Win10/11).
2. Select correct COM port in software (usually COM3, COM4, etc.).
3. Click Read from radio.
   • If failure: check COM port, cable connection, radio power. Try lower baud rate if option exists.
4. Edit channels directly in the grid or via channel properties dialog.
5. Click Write to radio.
6. Wait for "Success" message. Do not unplug during write.

10. Backing Up and Restoring Configurations

Do this before every major programming session:

1. Read from radio.
2. File → Save As → my_radio_YYYYMMDD.img.
3. Store backups in cloud or USB drive.

To restore: Open the .img file → Write to radio.

The software crashes upon opening

• Solution: The UV-10R software was written for Windows XP/7. Right-click the .exe > Properties > Compatibility Mode > Set to "Windows 7."

1. Understanding the Software Landscape

Why Bother with Software?

Typing in a repeater offset, tone, and shift direction using a 12-key pad is slow and error-prone. Programming software allows you to:

• Bulk edit: Type channel names, frequencies, and tones in a spreadsheet-style grid.
• Backup: Save your codeplug (radio configuration) to your PC. If the radio resets, you can restore everything in 30 seconds.
• CHIRP compatibility: Most Baofengs work with CHIRP, but the UV-10R is an exception.