Bonavita Sheffield Lifestyle Crib Instructions 2021 -

The Bonavita Sheffield Lifestyle Crib is a versatile 4-in-1 convertible furniture piece designed to transition from a crib to a toddler bed, daybed, and eventually a full-size headboard. Preparation & Hardware

Before beginning, ensure you have the required tools and parts. Most Bonavita models require an Allen wrench (usually included) and a Phillips head screwdriver. Do not use power tools, as they can damage the natural wood.

Key Hardware (Typical): 3-inch bolts, 2.5-inch bolts, barrel nuts, and wooden dowels. Mattress Requirements: Any mattress used must be at least inches, with a thickness between 4 and 6 inches. Assembly Instructions 1. Assemble the Frame

Back Rail: Connect the back rail to the left and right back corner posts using 3-inch bolts and barrel nuts.

Side Panels: Attach the left and right side panels to the back posts. Use wooden dowels for alignment before securing with the provided bolts.

Stabilizer Bar: Connect the stabilizer bars between the side panels to provide structural integrity. 2. Install the Mattress Support

Initial Setting: For newborns, set the mattress support to the highest position to make it easier to reach the infant. bonavita sheffield lifestyle crib instructions

Attachment: Align the mattress frame brackets with the holes on the corner posts. Secure each corner with a bolt and wing nut.

Safety Check: Ensure the "this side up" sticker on the mattress frame is facing correctly. 3. Attach the Front Rail & Footboard

Front Rail: Position the front rail between the front corner posts. Insert barrel nuts into the pre-drilled holes and secure with 2.5-inch bolts.

Footboard: Attach the footboard to the front legs by pre-threading bolts and tightening them with the Allen wrench. Conversion Stages

The Bonavita Sheffield Lifestyle Crib is a convertible furniture piece designed to transition from a crib to a toddler bed, daybed, and finally a full-size bed. Proper assembly is critical for safety; never substitute parts or use power tools, as they can damage the wood or compromise structural integrity. Required Tools & Hardware

Tools: Allen Wrench (usually included) and a Phillips head screwdriver. The Bonavita Sheffield Lifestyle Crib is a versatile

Major Components: Left and Right Panels, Front and Back Rails, Mattress Support, and Stabilizer Bar.

Hardware: Typically includes 1/4” x 3” bolts, 1/4” x 2-1/2” bolts, barrel nuts, and wooden dowels. Step-by-Step Assembly Instructions

Prepare the Sides: Attach the stabilizer bar to the bottom of the crib sides using barrel nuts and 3-1/8" bolts. Tighten securely with the Allen wrench. Install Mattress Support:

Choose a height setting based on your child's age: use the highest setting for newborns and the lowest once they can pull themselves up to stand.

Secure the support to the brackets using Phillips head screws and wing nuts.

Attach the Headboard: Secure the headboard (Back Rail) to the side panels using Allen head bolts and washers on each bottom leg. Attach the Footboard: Position the Front Rail between the left and right panels. Website: milliondollarbaby

Pre-thread Allen head bolts into the pre-drilled holes in the bottom legs of the footboard.

Secure using 2-inch Allen head bolts through the inside edge of the crib sides into the footboard. Conversion Stages Crib (1921) - Assembly and Operation Manual

Contact for Replacement Parts or Manuals

Bonavita / Million Dollar Baby Co.

• Website: milliondollarbaby.com
• Customer Service: 1-800-544-1108 (Mon–Fri, 8am–4:30pm PT)
• Email: customerservice@mdbfamily.com
• Replacement part request: Include model name (Sheffield), manufacture date (stamped on headboard), and part needed.

Here’s a user-friendly instruction and care write-up for the Bonavita Sheffield Lifestyle Crib. Since I can’t reproduce the official copyrighted manual, this is a general assembly and usage guide based on standard crib safety practices and the typical design of Bonavita’s Lifestyle collection.

Converting to a Toddler Bed (if equipped)

1. Remove one long side panel.
2. Attach the toddler guardrail (included with conversion kit).
3. Lower mattress support to the lowest position.
4. Keep crib away from windows, blinds, or wall hangings.

Use only Bonavita-authorized conversion kits.

Bonavita Sheffield Lifestyle Crib – Assembly & Care Guide

Thank you for choosing the Bonavita Sheffield Lifestyle Crib. This modern, convertible crib is designed to grow with your child — from a full-size crib to a toddler bed, and later to a daybed. Please read all instructions before beginning assembly.

Tools Required

• Included: 6mm Allen wrench
• Not included but helpful: Phillips head screwdriver, rubber mallet (for gentle tapping), and a second person for stability.

To Daybed

• Same as toddler bed, but without guardrail.

Step 1: Attach Headboard & Footboard to Side Panels

1. Insert wood dowels (G) into pre-drilled holes on headboard/footboard.
2. Align left side panel with headboard. Insert bolts (A) through side panel into barrel nuts (D) on headboard.
3. Tighten partially with Allen key (E). Repeat for right side panel.
4. Attach footboard using same method.

Bonavita Sheffield Lifestyle Crib – Assembly & Instruction Manual (Draft)

Model: Sheffield Lifestyle Crib
Style: 4-in-1 Convertible Crib (Crib, Toddler Bed, Daybed, Full-Size Bed)
Safety Certification: JPMA Certified, ASTM F1169, CPSC compliance