Skip to main content

Canon Service Tool V.3900 Download Patched

I’m unable to provide a direct download link for “Canon Service Tool V.3900” or any similar copyrighted repair software. Here’s why—and what you should know before searching for it.

Steps for Authorized Users:

If you are an authorized service provider looking for the Canon Service Tool V.3900:

  1. Contact Canon Directly: Reach out to Canon's support or your regional Canon service center. They can provide you with the necessary tools and information.

  2. Official Canon Resources: Use Canon's official resources and partner networks to obtain the software. This ensures you get the legitimate and latest version suitable for your needs.

Installation & Preparation

  1. Run on a Windows PC (typically Windows 7–10; check specific version notes).
  2. Disable antivirus temporarily only if it blocks the tool and you trust the source.
  3. Use a dedicated USB cable and a direct USB port (no hubs).
  4. Fully charge the printer or keep it plugged in.
  5. Note current printer firmware and settings.

13. Quick Reference: Do’s and Don’ts

If you want, I can:

The Canon Service Tool V.3900 is a professional, Windows-based utility used primarily to diagnose, maintain, and reset specific Canon inkjet printers. It is famously used for resetting the "Ink Absorber Full" (Error 5B00). Key Features & Functionality

Maintenance Counter Reset: Specifically designed to reset the waste ink absorber counter, allowing the printer to function after a "full" error.

Hardware Diagnostics: Authorized technicians use it to run internal tests and print EEPROM information to verify device health.

Calibration Tools: Performs print head cleaning, alignment, and test pattern printing.

System Updates: Capable of updating internal settings and firmware. Compatible Printer Series

The V.3900 version is broadly compatible with several older and legacy Canon series, including: PIXMA iP series (e.g., iP2700, iP4800, iP4900) PIXMA MG series (e.g., MG2100, MG5200, MG6100) PIXMA iX series (e.g., iX6500) PIXMA MP series How to Use the Service Tool

To use this software, the printer must first be placed into Service Mode. While steps vary by model, the general procedure is:

Canon Service Tool V.3900 Download Report

Introduction

The Canon Service Tool V.3900 is a software utility developed by Canon Inc. for servicing and maintaining Canon printers and other imaging devices. This report provides an overview of the tool, its features, and a guide on how to download and use it. Canon Service Tool V.3900 Download

What is Canon Service Tool V.3900?

The Canon Service Tool V.3900 is a comprehensive software tool designed for Canon printer technicians and service providers. It allows users to perform various maintenance and repair tasks, such as:

Key Features of Canon Service Tool V.3900

Downloading Canon Service Tool V.3900

To download the Canon Service Tool V.3900, follow these steps:

  1. Visit the Official Canon Website: Go to the official Canon website and navigate to the support section.
  2. Select Your Device: Choose your Canon printer or imaging device from the list of available products.
  3. Download the Tool: Click on the "Downloads" tab and search for "Canon Service Tool V.3900".
  4. Select the Correct Version: Ensure you select the correct version of the tool compatible with your device and operating system.
  5. Download and Install: Download the tool and follow the installation instructions.

System Requirements

Precautions and Disclaimer

Conclusion

The Canon Service Tool V.3900 is a valuable resource for Canon printer technicians and service providers. By following the download and installation instructions, users can access advanced diagnostic and maintenance features to keep Canon devices running smoothly.

Additional Resources

Revision History

Please let me know if you want me to make any changes.

For mathematical expressions, I will use $$ syntax. But in this case, there are no mathematical expressions.

Also, I used bullets for listing items where necessary: I’m unable to provide a direct download link

The Canon Service Tool V.3900 is a specialized utility designed for maintenance, diagnostics, and resetting critical internal counters for various Canon inkjet printer series. Key Features and Uses

This software is primarily used by technicians and DIY users to resolve specific system errors that cannot be cleared through standard settings.

Ink Absorber Counter Reset: The most common use is clearing the "Ink Absorber Full" error (error codes 5B00, 5B01, 5B02, 5B03, 1700, 1701).

EEPROM Operations: It allows users to read and print EEPROM data to diagnose underlying hardware issues.

Maintenance: Features include cleaning cycles, print head alignments, and test prints. Supported Models

V.3900 is compatible with many older Canon series, though newer models may require later versions like V.4720 or V.5204. Supported series often include: iP Series: iP2700, iP4800, iP4900, iP7200. MG Series: MG2100, MG3100, MG5200, MG8200. MP/iX Series: MP230, MP280, iX6500. How to Use the Service Tool V.3900

Using the tool requires the printer to be in Service Mode. This state is typically achieved by a specific physical button sequence:

Enter Service Mode: With the printer off, hold Resume/Stop, then press and hold Power. While holding Power, press Resume/Stop 5 times (6 for some MG models), then release both.

Verify Status: The Power light should stay solid green. If it blinks, other errors are present and must be cleared first.

Run Software: Connect the printer via USB (wireless is not supported) and open the V.3900 executable.

Reset Counter: In the "Ink Absorber Counter" section, select "MAIN" and click "SET". Important Safety and Download Notes Ink absorber full - MX892 - Canon Knowledge Base

The Canon Service Tool V.3900 is a specialized utility primarily used to reset the "Ink Absorber Counter" (Error 5B00) on various Canon PIXMA and MG series printers. Download and Access

Official Availability: This software is not publicly hosted on official Canon consumer support sites; it is typically an internal technician tool.

Third-Party Sources: It is often available for purchase or download through specialized service manual providers like 2manuals.com. Contact Canon Directly : Reach out to Canon's

Compatibility: Supports older series including iPxxxx, iX, MGxxxx, MP, and MX models. Operational Requirements

To use the Service Tool, the printer must be placed into Service Mode manually:

Preparation: Connect the printer to a PC via USB (Wireless/Network mode will not work for this tool). Button Sequence: Turn off the printer (keep it plugged in).

Press and hold the Stop/Resume (red triangle) button, then press and hold Power.

While holding Power, release Stop/Resume and press it 5 times (or 6 times for some MG series).

Release all buttons. A steady green light indicates successful entry into Service Mode. Key Functions

Ink Absorber Reset: The most common use is selecting "Main" in the Ink Absorber Counter section and clicking "Set" to clear the full-pad error.

EEPROM Operations: Allows reading or clearing the printer's non-volatile memory.

Print Head Management: Includes options for deep cleaning and print head alignment adjustments beyond the standard user menu. Important Precautions

Hardware Maintenance: Resetting the counter digitally does not physically clean the ink pads. For long-term use, the pads should be replaced or cleaned to prevent physical ink overflow.

Software Risks: Using the wrong version (e.g., trying to use V.3900 on a newer G-series printer that requires V.5105) can permanently lock the printer's mainboard.

Verification: Ensure the printer is in a steady green-light state before running the .exe to avoid "Error 006" (communication failure).

Step 3: Run the Tool

  1. Connect the printer via USB (Wi-Fi will not work in Service Mode).
  2. Run ServiceTool_V3900.exe as Administrator (Right-click → Run as administrator).
  3. Click the "Set Destination" button (usually top-left) to ensure regional compatibility.
  4. Select "Main" pad counter and click "Reset".

Compatible Printers

The V3900 tool is widely used for mid-2010s to early-2020s PIXMA models, including:

Note: For very new models (2023+), consider V4000 or newer.

Canon Service Tool v.3900 — Comprehensive Guide

Warning: Canon Service Tool (also called Service Tool, Service Utility, or Service Tool Utility) is a third‑party or manufacturer‑released diagnostic and maintenance program intended for authorized technicians. It can reset waste ink counters, run head cleaning cycles, update firmware, and perform other service operations. Using it incorrectly can damage printers, void warranties, or violate regional regulations. Only use service utilities on printers you own, and follow all safety and legal guidance.

How to obtain safely

  1. Prefer official Canon service channels or authorized service centers.
  2. If unavailable, obtain from reputable technician forums or communities that provide checksums and version notes—verify files with antivirus before running.
  3. Avoid unverified sources or executables from random sites.

Typical Use Steps (generalized)

  1. Install the driver and the service tool on the PC.
  2. Put the printer into Service Mode (model-dependent — often involves holding specific buttons while powering on).
  3. Connect printer to PC via USB.
  4. Launch the Service Tool and select the correct COM/port or detected device.
  5. Choose the operation: “Waste Ink Counter Reset,” “EEPROM Initialize,” or maintenance tasks.
  6. Execute the operation and wait until the tool reports completion.
  7. Power-cycle the printer and run a test print/nozzle check.