Skip to Content

Cisco Acs 55 Iso |verified| Download Updated -

Cisco Secure ACS 5.5 is currently End-of-Life (EoL) and obsolete, meaning the ISO is no longer available for official download from the Cisco website. Cisco's policy for retired security products involves removing documentation and downloads to prevent the use of software that is highly susceptible to security vulnerabilities. Key Status Updates (April 2026)

Official Support Ended: The last date to receive service and support for ACS 5.5 was April 30, 2018.

Download Availability: There is no official link for the ACS_v5.5.0.46.iso or recovery images. Previously active links on the Cisco Software Download page are now restricted or removed for this version.

Replacement Product: Cisco has transitioned its access control services to the Cisco Identity Services Engine (ISE). ACS 5.5 users are encouraged to migrate directly to ISE, which supports more modern security protocols. Migration & Alternatives cisco acs 55 iso download updated

Upgrade to ACS 5.8 and moving to VM platform - Cisco Community

Cisco Secure Access Control System (ACS) 5.5 reached Last Date of Support on April 30, 2018

, and is now considered obsolete. Official downloads are generally no longer available on the Cisco website as the product has been replaced by Cisco Identity Services Engine (ISE) Cisco Community ISO Download & Access Official Source : Historically, the recovery ISO ( ACS_v5.5.0.46.iso ) was hosted at the Cisco Software Central Entitlement Required Cisco Secure ACS 5

: To download legacy software, your Cisco account must be associated with an active Service Contract (SmartNet) that includes ACS 5.x entitlements. Security Warning

: Running ACS 5.5 in a production environment is highly discouraged due to known unpatched vulnerabilities, including RMI privilege escalation and command injection. Cisco Community Installation Guide for ACS 5.5 1. System Requirements & Preparation Deployment Options : Can be installed on physical Cisco SNS-3415/3495 appliances or as a virtual machine on VMware ESXi VM Specs (Minimum) Disk Space : 60 GB minimum. : 4 GB (4096 MB). : 2 vCPUs. (64-bit) as the version. Cisco Community 2. Installation Steps (VMware) : Use the "Typical" configuration in VMware. : In VM settings, go to the tab, select Use ISO image file , and browse to your ACS_v5.5.0.46.iso : Start the VM to boot from the ISO. : Select option [1] Cisco Secure ACS Installation (Keyboard/Monitor) Initial Setup : When the localhost login appears, type and press Enter to begin the network configuration wizard. Configuration Parameters : You will be prompted to enter: IP Address/Subnet Mask Default Gateway DNS Server NTP Server Username/Password (default admin user) 3. Post-Installation & Licensing Web Access : Access the UI via

Where to Find Updated Community Images (Proceed with Caution)

For labs and archival research only, if you cannot access the original Cisco media, some reputable network engineering forums archive "abandonware" ISOs. These include: Where to Find Updated Community Images (Proceed with

Verification steps for community ISOs:

  1. Run file command on ISO: Should show "ISO 9660 CD-ROM filesystem data".
  2. Check for hidden .rpm files inside /packages/ – a genuine Cisco ACS ISO contains over 800 RPMs.
  3. Hash match with a known good reference (ask in forums for current valid hash).
  4. Scan with ClamAV or your security tool of choice before any production use.

Never run a legacy ACS ISO directly on production hardware unless it’s air-gapped and you have physically validated the SHA sum.

Installation & The "Updated" Requirement

If you are installing ACS 5.5 today, simply installing the base ISO is not enough. The base version is notoriously unstable on modern VMware hypervisors (ESXi 6.5/6.7/7.0) due to driver compatibility issues.

To have a functional "updated" system, you must:

  1. Install the Base ISO: Mount the acs-5.5.0.46.iso to your VM.
  2. VM Requirements: Ensure you are using the correct hardware compatibility (typically VM Hardware Version 8 or 10 for best results) and assigning the correct resources (Minimum 4GB RAM, 2 vCPU).
  3. Apply Patches: The base ISO installs version 5.5.0.46. You must then download the latest patch (Patch 7 or later) from the Cisco Software Center and apply it via the CLI command patch install.

Failure to patch the system will result in bugs related to:

Troubleshooting Common ISO Download & Installation Issues

2. Why finding an “updated” ISO is nearly impossible today