Cutting Plotter Ki720 Driver ((exclusive)) Download Free Access

To download the free drivers for the KI-720 cutting plotter (often branded by Vevor or Teneth), you typically need to install the USB communication driver first to ensure your PC recognizes the machine via COM port. Quick Download & Setup Guide

Mystery cutter KI-720 - Competitor Cutter Help - USCutter Forum cutting plotter ki720 driver download free

What is the KI720 Cutting Plotter?

Before diving into drivers, let’s quickly identify the machine. The KI720 is a desktop vinyl cutter, typically with a 720mm (28-inch) cutting width. It is compatible with common sign-making software like SignMaster, ArtCut, FlexiSIGN, and Sure Cuts A Lot (SCAL). It communicates with your PC via: To download the free drivers for the KI-720

• USB Port (most common)
• Serial (COM) Port (older models)
• Parallel Port (rare)

To make these connections work, you need the correct driver. What is the KI720 Cutting Plotter

Step 5: Assign the Correct COM Port

1. Open Device Manager (right-click Start button).
2. Expand Ports (COM & LPT).
3. Look for “USB-SERIAL CH340 (COM3)” or similar. Note the COM number (e.g., COM3 or COM4).
4. Right-click it > Properties > Port Settings > Advanced.
5. Change the COM port number to COM1 or COM2 if your software cannot handle higher numbers. Click OK.

2. Windows Built-in Driver (HP-GL Emulation)

If you can’t find the specific KI720 driver, you can use a generic HP-GL driver. On Windows:

• Go to Devices and Printers > Add a printer.
• Choose “Add a local printer.”
• Select USB001 (Virtual printer port for USB).
• Under manufacturer, select HP and the model HP DesignJet 750C Plus (or any HP-GL plotter).
• This works for 80% of basic cutting tasks but may lack advanced blade control.