Ds-2cd1021-i Firmware Download |work| Today

Title: Keeping Your Hikvision DS-2CD1021-I Secure: A Guide to Finding and Updating Firmware

Common Hardware Revisions for DS-2CD1021-I:

| Hardware ID | Chipset | Max Firmware Version | |-------------|---------|----------------------| | 0x0 to 0x2 | Old Ambarella | Last version ~V5.4.5 | | 0x3 to 0x4 | Mid-range | V5.5.8x to V5.6.x | | 0x5 | Newer G1 platform | V5.6.x+ (may support H.265) |

Important: If your camera runs firmware V5.4.5 or earlier, do NOT attempt to directly install V5.6.x. You may need a bridging update. Always read Hikvision’s release notes. ds-2cd1021-i firmware download

---

What a legitimate firmware file looks like:

• Filename example: IPC_G1_EN_STD_5.6.8_210625.zip or IPC_R_EN_STD_5.5.82_180507.zip.
• Contains a .dav file (e.g., digicap.dav).
• SHA256 hash provided on the download page for verification.

---

Step 4: How to Update the Firmware

1. Download the correct .zip file and extract it. You will see a .dav file (e.g., digicap.dav).
2. Connect via LAN – Do not update over Wi-Fi or a long-distance network.
3. Log into the camera (Internet Explorer or Pale Moon 32-bit required for older models).
4. Go to Configuration > System > Maintenance > Upgrade.
5. Under Firmware, click Browse and select the .dav file.
6. Click Upgrade.
7. Wait 5-10 minutes. Do NOT power off or refresh the page. The camera will reboot automatically.
8. After reboot, clear your browser cache and log in again. Perform a factory default (Configuration > System > Maintenance > Default > Restore All).

---

Prerequisites:

• Laptop/PC with Ethernet port (avoid WiFi during update).
• Camera powered via PoE or 12V DC adapter.
• IP address of the camera known (use SADP Tool from Hikvision if unknown).
• Internet Explorer mode browser (or Edge in IE mode), or the latest version of Firefox/Chrome depending on firmware age.

4.2 File Verification

• The downloaded file is typically a .zip or .rar archive containing a .dig or .dav file.
• MD5/SHA Checksum: Users should verify the file hash against the values provided by the supplier to ensure the file has not been tampered with.

Direct Search Steps:

1. Go to Hikvision’s global support page.
2. Click on Firmware (under “Product Type”).
3. In the search box, type DS-2CD1021-I (including the dash).
4. Filter by “Network Camera” > “Bullet Camera”.
5. Review the list. Verify the Hardware Version column matches yours.

How to find your camera’s hardware version:

1. Via Web Interface:

   • Log into the camera (default IP: 192.168.1.64, credentials: admin / 12345).
   • Go to Configuration > System > System Settings > Basic Information.
   • Look for Firmware Version Property (e.g., V5.5.0 build 170721) and Hardware Version (e.g., 0x0 to 0x5).

2. On the Product Label:

   • Locate the sticker on the camera’s body or the original box.
   • Find DS-2CD1021-I followed by a suffix like (C), (C5), (D), or (6MM).
   • Also note the Serial Number (first 4-6 digits indicate the region and batch).