Epson Et2400 Reset
To reset an Epson EcoTank ET-2400 and resolve paper-related issues, follow the specific procedures for hard resets, factory defaults, and paper path maintenance. Resetting the Epson ET-2400
You can perform a reset to clear minor software glitches or wipe network settings.
Hard Reset (Power/Info Combo): Press and hold the Information and Power buttons simultaneously for about 5 seconds until the lights begin to flash [17, 28]. Wait roughly one minute for the lights to stop flashing and for the printer to cycle; once the power light is steady, the reset is complete [28].
Factory Default (Settings Menu): If you can access the control panel, navigate to Settings > General Settings > Restore Default Settings. You can choose to reset only the network settings or "Clear All Data and Settings" to return the entire printer to its original state [11, 26].
Wi-Fi Reset: Resetting the printer primarily erases Wi-Fi credentials [5.1]. To enter setup mode after a reset, press and hold the Wi-Fi button for 5 seconds until it flashes [28]. Developing a Paper (Clearing Jams and Errors)
If you are receiving a persistent "Paper Jam" error or the printer won't feed paper, follow these steps to "develop" or clear the paper path:
Clear the Path: Turn off and unplug the printer [5]. Open the rear paper feeder and the front scanner unit [18]. Inspect the internal rollers for small torn pieces of paper or debris that may be obstructing the sensors [5, 15].
Clean the Rollers: Use a lint-free cloth dampened slightly with water to gently clean the paper feed rollers if they are slipping or failing to grab the paper [5, 8].
Reset the Sensor State: After clearing any physical jam, press and hold the Power button for 10 seconds while the unit is unplugged to drain residual power and reset error sensors [5].
Proper Loading: Ensure you are using high-quality, non-curled paper [8]. Load up to 100 sheets in the rear tray, sliding the blue edge guides until they barely touch the paper to keep it aligned without squeezing it [12]. Maintenance for Print Quality
If "developing a paper" refers to achieving a clear printed page:
Print Head Cleaning: Press and hold the Stop/Cancel button for 5 seconds to initiate an automatic cleaning cycle (takes about 3 minutes) [2, 19].
Nozzle Check: Print a nozzle check pattern from the printer maintenance menu or Epson Support Utility to confirm if the ink is flowing correctly [21, 35].
For further assistance, you can view official video guides on the Epson Support Site [32]. epson et2400 reset
Resetting an Epson EcoTank ET-2400 Go to product viewer dialog for this item.
printer covers network issues, factory defaults, and waste ink pad counters. Since this model lacks a display screen, procedures rely on button combinations. Here is the full content guide for resetting your Epson ET-2400 1. Reset Wi-Fi Network Settings (Most Common)
This procedure resolves Wi-Fi connectivity issues, enabling the printer to connect to a new network or pair with a new device. Step 1: Turn off the printer.
Step 2: Press and hold the Network button (left button with a wireless symbol) and the Power button simultaneously for about four to five seconds.
Step 3: Release both buttons when the two network lights start flashing.
Step 4: Allow the printer to finish its process (lights will blink and then stop).
Step 5: The Wi-Fi is now reset, and the printer can be configured as new. 2. Enter Wi-Fi Setup/Pairing Mode
After resetting the network, or if the printer is not pairing:
Step 1: Press and hold the Wi-Fi button for approximately four to five seconds until the two lights start blinking alternately.
Step 2: The printer is now in pairing mode, ready to be connected to a smartphone or computer via the Epson Smart Panel app. 3. Factory Reset / All Settings To clear all custom settings and restore the default state: Step 1: Turn off the printer.
Step 2: Hold down the Information button ('i' button) and press the Power button simultaneously.
Step 3: Wait until the Wi-Fi or alert lights flash in a unique pattern (different models vary slightly), then release. Step 4: Restart the printer. 4. Waste Ink Pad Counter Reset (Hard Reset)
If the printer shows "waste ink pad is full" or all lights are flashing (and the printer is not fixing itself), the counter must be reset. This typically requires third-party software, such as the WIC Reset Utility. To reset an Epson EcoTank ET-2400 and resolve
Step 1: Connect the printer to a Windows computer using a USB cable. Step 2: Download and run WIC Reset Utility.
Step 3: Select the printer, click "Reset Waste Ink Counters," and enter a purchased Reset Key. Step 4: Restart the printer. 5. Troubleshooting "All Lights Flashing" If the printer is frozen with all lights blinking:
Power Cycle: Unplug the printer from the wall, wait 5-10 minutes, and plug it directly into a wall outlet (avoid power strips).
Firmware Update: Use Epson Software Updater via USB to update the firmware, which can resolve persistent error states.
To make sure you're taking the right step, what is your printer currently doing? Are all lights flashing? Is it having trouble connecting to Wi-Fi? Do you see an "Ink Waste Pad" error? Let me know so I can help you with the exact procedure. How to Reset Your Epson EcoTank ET-2400 Printer
To reset your Epson EcoTank ET-2400, the specific method depends on whether you want to clear your Wi-Fi settings, perform a hard power reset, or reset the internal ink counters. Since the ET-2400 does not have a large LCD screen, most resets are performed using physical button combinations. Reset Wi-Fi Settings
Use this method if you are moving your printer to a new network or having connectivity issues. Turn off the printer.
Press and hold the Wi-Fi (network) button and the Power button simultaneously.
Hold them for about 5 seconds until the Wi-Fi light and the status lights start to flash.
Release the buttons; the printer will restart with cleared network settings. Hard Power Reset
If the printer is frozen or showing persistent error lights (like a false paper jam), a "flea power" drain often clears the error state.
Unplug the power cord from the back of the printer while it is still on. Disconnect the power cord from the wall outlet.
Wait for 2-3 minutes to allow any residual charge to dissipate. Using Epson software (recommended)
Press and hold the Power button for 30 seconds while it is unplugged.
Plug it back in directly to a wall outlet (avoid surge protectors during this process) and turn it on. Waste Ink Pad Reset
If you see the ink and paper lights blinking simultaneously and get a message that the "service life is ended," your waste ink counter needs a reset.
Software Utility: This typically requires third-party software like the WIC Reset Utility.
Reset Key: You will likely need to purchase a "Reset Key" from a service provider to fully clear the internal counter.
Hardware: Note that resetting the software counter does not physically clean the pad; if the pad is physically saturated, it should be replaced to prevent ink leaks. Troubleshooting Firmware Interruptions How to Reset Your Epson EcoTank ET-2400 Printer
To reset your Epson ET2400 printer's Wi-Fi, press the I button and power button simultaneously for 5 seconds until lights blink. YouTube·Printer Insider Epson EcoTank ET-2400: How to Reset the Wi-Fi Settings
Turn off your printer, then hold the network and power buttons for 4 seconds until lights flash to reset Wi-Fi. YouTube·Printer Insider Epson ET-2400: supported functions by WIC Reset Utility
Using Epson software (recommended)
- Download Epson's official printer utility or Epson Software Updater for drivers and maintenance tools.
- Use the Maintenance or Troubleshooting sections to run nozzle checks, head cleaning, and firmware updates.
The Bottom Line
The Epson ET-2400 reset isn’t just a hack. It’s a small act of defiance against planned obsolescence. With 10 minutes of courage, a sketchy-looking program, and 5 precise button presses, you can revive a printer that a repair shop would call “totaled.”
Your ink tanks are full. Your wallet is happy. And that blinking orange light?
Defeated.
Would you like a simplified checklist version of the reset steps or tips on installing an external waste ink tank for the ET-2400?
This guide covers the different types of resets available for the Epson EcoTank ET-2400, ranging from simple network fixes to more complex maintenance counter resets.
Waste ink pad / service required errors
- Symptom: Printer displays "Service required" or "Waste Ink Pad is at the end of its service life."
- Official recommended action: Contact Epson support or an authorized service center for repair or replacement of the waste ink pads.
- Unofficial options some users use (risky, may void warranty):
- Use third-party reset utilities to reset the internal waste counter.
- Replace/clean waste ink pads and then reset the counter.
- Reflashing or modifying firmware may be required in some cases.
- Note: I do not recommend unofficial resets if your printer is under warranty or you’re unsure how to safely service hardware.
Part 4: Step-by-Step Guide – How to Perform an Epson ET-2400 Reset
Follow this process exactly. Skipping steps can cause the reset to fail.
Part 4: Hard Reset via "Button Combination" (Emergency Mode)
If your screen is frozen or stuck on a logo, you may need a hardware reset.
- Unplug the power cord from the back of the printer (not the wall).
- Wait 60 seconds (press the power button while unplugged to drain residual charge).
- Hold down the Power button + Stop button + Color Copy button simultaneously.
- While holding them, plug the power cord back in.
- Keep holding for 10 seconds, then release.
- The printer should enter a recovery mode. Turn it off normally via the power button and turn back on.