Medical Malpractice Insurance for orthopaedic surgeons

Epson L3118 Resetter Adjustment Program Install [ ULTIMATE - 2024 ]

Fixing the "Service Required" Error: A Guide to the Epson L3118 Adjustment Program

The Epson L3118 Adjustment Program (also known as a resetter tool) is specialized software designed to resolve the "Service Required" error by resetting the waste ink pad counter. This error typically occurs when the printer's internal ink pads reach the end of their expected service life. How to Use the Adjustment Program

To reset your printer's waste ink counter, follow these general steps found in standard adjustment utilities:

Download and Extract: Locate the Adjustment Program for the L3118 model. Ensure you download it from a reputable source, as these are often third-party tools. Initialize Connection: Connect your printer via USB and run the AdjProg.exe file. Select Model: Click Select and choose the (or compatible series like L3110) from the model list.

Enter Particular Adjustment Mode: Click on the Particular Adjustment Mode button.

Find Waste Ink Pad Counter: From the maintenance list, select Waste ink pad counter and click OK. Check and Initialize: Check the box for Main pad counter. Click Check to see the current point usage. Click Initialize to reset the counter to zero. Finalize: Turn your printer off and back on when prompted. Alternative Reset Methods

If you prefer not to use third-party adjustment programs, other options include:

WIC Reset Utility: A widely used application for printer maintenance that can reset waste counters on various Epson models.

Physical Chip Resetter: Some users use a physical tool to reset the chip on the maintenance box directly.

Official Support: Epson recommends contacting an authorized service center to physically replace the ink pads and perform a professional reset. Important Precautions

Physical Maintenance: Resetting the digital counter does not clean the physical ink. If the pads are saturated, continuing to print could lead to ink leaks.

Official Downloads: For official drivers and standard utilities, always check the Epson Support site.

Warranty: Using third-party resetter software may void your printer's warranty.

Using Epson Adjustment Program/Utility to reset waste counter

How to Install and Use the Epson L3118 Adjustment Program If your Epson L3118 is showing a "Service Required" error or has blinking red lights, it likely means your waste ink pad counter has reached its limit. Instead of heading to a repair shop, you can often fix this at home using the Epson Adjustment Program (also known as a Resetter). What is the Epson L3118 Adjustment Program?

The Adjustment Program is a model-specific utility designed to reset internal printer counters. For the Epson L3118, it is primarily used to: Reset the Waste Ink Pad Counter when it becomes "full". Clean the print head and perform nozzle tests. Read and write EEPROM settings or printer serial numbers. How to Install the Resetter Program

Download the File: Find a trusted source for the Epson L3118 Adjustment Program, such as chiplessprinter.com or 2manuals.com. epson l3118 resetter adjustment program install

Disable Antivirus Temporarily: Because these are unofficial tools, many antivirus programs flag them as "false positives." You may need to add the folder to your antivirus exclusion list.

Extract the Files: Use a tool like WinRAR to extract the folder. If prompted for a password, it is often provided by the download site (e.g., "adjprogram.com").

Run as Administrator: Right-click AdjProg.exe and select Run as Administrator to ensure the program has the necessary permissions to communicate with your printer. Step-by-Step Guide to Resetting Your Printer

Once the software is open, follow these steps to clear the "Service Required" error: Reset Epson L3118 Waste Ink Pad Counter

Epson Adjustment Program or Waste Ink Counter Reset Utility Service Required Error of Epson Printers. TECH-AID TV•8K views · 2:09. YouTube·Reset Printer How to: Use EPSON Adjustment Program

How to Reset the Epson L3118: A Complete Guide to the Adjustment Program

If your Epson L3118 is flashing red lights and showing a "Service Required" message, you aren’t alone. This typically means the waste ink pad counter has reached its limit. While Epson recommends official service, you can often resolve this yourself using the Epson Adjustment Program (Resetter). Step 1: Download & Prepare the Software

To get started, you'll need the specific utility for your printer model. Find the Program: Search for "Epson L3118 Resetter" on trusted sites like Disable Antivirus:

Most antivirus software flags these adjustment tools as "false positives." You must temporarily disable your antivirus or add the folder to your exclusion list before extracting the files. Extract Files:

Use WinRAR or 7-Zip to extract the folder. If a password is required, it is often adjprogram.com or provided by the download source. Step 2: Install and Connect Connect via USB:

Ensure your printer is connected directly to your computer via a USB cable. This process does not work over Wi-Fi. Run as Administrator: Right-click AdjProg.exe and select Run as Administrator Select Model: button and choose

from the Model Name dropdown. Leave the Port as "Auto Selection" or choose the specific USB port if known. Step 3: Reset the Waste Ink Pad Counter Once the program is open, follow these precise steps: Open Maintenance: Particular Adjustment Mode Find the Counter: Locate and select Waste ink pad counter under the Maintenance section, then click Check Status: Tick the boxes for Main pad counter Platen pad counter to verify that the counter has reached 100%. Initialize Reset: Tick the boxes again and click Initialize . A pop-up will appear; click to confirm. Restart Printer:

The program will prompt you to turn off your printer. Power it off, then click

on the screen. Finally, turn the printer back on to complete the reset. HOW TO RESET AN EPSON L3150 PRINTER

What is an Epson L3118 Resetter Adjustment Program?

The Epson L3118 resetter adjustment program is a software tool used to reset the printer's waste ink pad counter and adjust the printer's settings. This program is usually required when the printer's waste ink pad is full, and the printer stops working. Fixing the "Service Required" Error: A Guide to

Before You Begin

  1. Download the Resetter Adjustment Program: You'll need to download the Epson L3118 resetter adjustment program from a reliable source. Be cautious when downloading software from the internet, as some sources may bundle malware or viruses with the program. You can try searching for the program on the official Epson website or reputable software download websites.
  2. Check the Program Compatibility: Ensure that the resetter adjustment program you downloaded is compatible with your Epson L3118 printer model and your computer's operating system (Windows or macOS).
  3. Disable Antivirus Software: Temporarily disable your antivirus software to prevent any interference with the installation process.

Installation Steps

  1. Extract the Downloaded File: Extract the downloaded zip file or executable file to a folder on your computer.
  2. Run the Installer: Run the extracted executable file (usually named "AdjProg.exe" or "Epson Resetter.exe") as an administrator. Right-click on the file and select "Run as administrator" to ensure the program installs correctly.
  3. Follow the Installation Wizard: The installation wizard will guide you through the installation process. Follow the on-screen instructions to complete the installation.
  4. Connect the Printer: Connect your Epson L3118 printer to your computer using a USB cable. Ensure the printer is turned on.
  5. Launch the Resetter Adjustment Program: Once installed, launch the resetter adjustment program. The program will detect your printer model and display the main interface.

Using the Resetter Adjustment Program

  1. Select the Printer Model: Select your Epson L3118 printer model from the list of available printers.
  2. Check the Waste Ink Pad Counter: Check the waste ink pad counter to see if it's full (usually indicated by a value of 100%).
  3. Reset the Waste Ink Pad Counter: If the waste ink pad counter is full, click on the "Reset" button to reset the counter.
  4. Adjust Printer Settings: The program may also allow you to adjust printer settings, such as the paper size and print head alignment.

Post-Installation Steps

  1. Re-enable Antivirus Software: Re-enable your antivirus software to ensure your computer remains protected.
  2. Restart Your Computer: Restart your computer to ensure the changes take effect.
  3. Test the Printer: Test your Epson L3118 printer to ensure it's working correctly.

Important Notes

  • Use at Your Own Risk: Using a resetter adjustment program may void your printer's warranty. Proceed with caution and at your own risk.
  • Be Cautious of Scams: Be cautious of websites or software that claim to offer "free" or "cracked" versions of the resetter adjustment program. These may be scams or malware.

To reset your Epson L3118 using the Adjustment Program, you need to use a utility designed to reset the Waste Ink Pad Counter

. This is necessary when your printer stops working and displays an "Ink pad is at the end of its service life" error. Steps to Use the Epson L3118 Resetter

The process for the L3118 is nearly identical to other L-series models like the L3150 or L120: Preparation

: Ensure your printer is turned on and connected to your computer via a (Wi-Fi resets are often unstable). Open the Utility AdjProg.exe file. If prompted, click and choose from the Model Name list. Adjustment Mode : Click on the Particular Adjustment Mode Waste Ink Counter Find and select Waste ink pad counter from the list, then click Check the boxes for Main pad counter Platen pad counter

to see the current usage percentage. If it's near 100%, it needs a reset. Initialize Keep the boxes checked and click the Initialize when the confirmation pop-up appears. : The program will ask you to turn off your printer . Turn it off, then click

on the computer. Turn the printer back on, and the error should be cleared. Important Safety Notes Physical Hardware

: Resetting the software does not clean the physical ink pads. If you reset the counter multiple times without replacing or cleaning the pads, ink may eventually leak from the bottom of the printer.

: Be cautious when downloading resetter tools from third-party sites, as they are often flagged as "false positives" by antivirus software. Always scan downloaded files before running them. Official Support : For a permanent and safe fix, you can contact Epson Support to have the pads professionally replaced. Are you seeing a specific error code on your computer screen, or are the lights on your printer in a certain pattern?

The Epson L3118 Adjustment Program, commonly referred to as a "resetter," is a specialized service utility used to resolve the "Service Required" error that occurs when a printer's waste ink pad counter reaches its limit. While this tool is essential for extending the life of the hardware, it requires careful installation and a clear understanding of its function to avoid damaging the printer. Purpose and Function

Every Epson EcoTank printer, including the L3118, contains internal absorbent pads designed to collect excess ink during print head cleaning and initial charging. The printer tracks this ink volume using a digital counter. Once this counter hits a predefined threshold, the printer locks itself to prevent ink overflow, resulting in flashing red lights and a "service required" message on your computer. The adjustment program allows users to communicate with the printer's EEPROM (memory) to reset these counters to zero. Installation and Usage Steps

To use the adjustment program on a Windows-based system, follow these general steps: Download the Resetter Adjustment Program : You'll need

If your Epson L3118 is flashing its service lights and showing a "Service Required" message, it usually means the Waste Ink Pad counter has reached its limit. To fix this without a physical repair, you can use the Epson L3118 Resetter (Adjustment Program). How to Use the Epson L3118 Adjustment Program

The adjustment program is a utility used to reset the internal counters and calibrate printer settings. Follow these steps to perform a reset:

Preparation: Ensure your printer is connected to your computer via a USB cable (Wi-Fi resets are often unstable) and turned on.

Launch the Tool: Extract the downloaded resetter files and run the AdjProg.exe file as an administrator.

Select Model: Click the Select button. Choose L3118 (or the L3110 series, which often shares the same firmware) from the Model Name list and click OK. Enter Adjustment Mode: Click on Particular Adjustment Mode.

Maintenance: Scroll down to the Maintenance section, select Waste ink pad counter, and click OK. Check and Initialize:

Check the boxes for Main pad counter and Platen pad counter. Click the Check button to see current usage percentages.

If they are at 100%, click the Initialize button to reset the counters to zero.

Finalize: A pop-up will ask you to turn off your printer. Power it down, click OK on the software, and then turn the printer back on. Important Considerations

Official Sources: While many third-party sites offer these "resetters," Epson officially recommends having the ink pads replaced by an authorized service provider, as the pads may physically overflow if reset too many times.

Antivirus: Many computers flag adjustment programs as threats because they modify printer firmware. You may need to temporarily disable your antivirus or add an exclusion to run the file.

Epson Adjustment Program Activation and Reset Tutorial for Epson Printers

Prerequisites

  • Windows PC (Windows 7–11 recommended).
  • USB cable and the Epson L3118 connected and powered on.
  • Administrator privileges on the PC.
  • Antivirus temporarily disabled only if you trust the file source (re-enable after).
  • (Optional) System restore point or full backup.

5. Finalizing

After the initialization is complete, turn off the printer using the power button. Wait a few seconds, turn it back on, and attempt a test print. The "Service Required" error should be resolved.

Step 1: Downloading the Correct Adjustment Program

Search for “Epson L3118 Adjustment Program.rar” or “Epson L3118 Resetter.rar”. Ensure the filename matches your exact model. Do not use L3110 or L3115 programs, as they may brick your printer. Look for version numbers like Epson L3118 Series Adjustment Program v2.3.0 or similar.

Pro Tip: Download from reputable sources. Avoid suspicious websites that ask for credit card info. Legitimate files are typically 500KB to 5MB in size.

Step 4: How to Reset the Waste Ink Pad Counter

Once the program is open, follow these steps carefully to reset your printer.

  1. Accept the License: Click Accept on the first screen to agree to the software license terms.
  2. Select Your Printer:
    • Model Name: Select L3118 (or L3110 if L3118 is not listed).
    • Destination: Select IEEE128.4.4 or the option that matches your region (often "All" or "Asia").
    • Port: Select USB Local Printing (ensure your printer is connected to the PC via USB).
    • Click OK.
  3. Select Adjustment Mode: You will see a new window with several options. Select "Waste ink pad counter" and click OK.
  4. Check the Counter:
    • You will see the "Main pad counter" and "Platen pad counter."
    • Click the "Check" button. This will read the current values from the printer. You should see that the counters are near 100%.
  5. Reset the Counter:
    • Tick the boxes next to Main pad counter and Platen pad counter.
    • Click the "Initialization" button.
    • A confirmation box will appear. Click OK.
  6. Finish Up:
    • The printer will perform a reset. You will see a progress bar.
    • Once finished, turn off your printer using the power button. Wait 5 seconds and turn it back on.