The ES99 is an electronic controller commonly used in industrial rotary screw air compressors, most notably by brands like Atlas Copco, Ceccato, and Chicago Pneumatic. Its primary function is to manage energy consumption by automatically starting and stopping the motor based on air demand. 🛠️ Key Technical Specifications Power Supply: 12 VAC, 50/60 Hz. Current Draw: ~250 mA. Main Functions: Control: Manual Start, Stop, and Alarm Reset.
Monitoring: Tracks running hours, motor starts, and current state (load/unload).
Safety: Built-in protection for motor thermal overload, incorrect phase rotation, and high oil temperature. 📋 Operation and Indicators
The ES99 interface typically features several LED indicators to signal the compressor's status:
Steady Green LED: Main power is on; the unit is ready to start.
Flashing LED: Indicates the compressor is in "Stand-by" or running idle (unloaded) before stopping.
Thermal Alarm: Signals motor overheating or tripped thermal protection.
Reset Procedure: Hold the "Reset" button for more than 3 seconds to clear stored alarm codes and perform a LED lamp test. 📂 Manuals and Documentation
You can find the full content and PDF versions of the ES99 manual through the following sources: Official ES99 Instruction Book
: Includes technical features, terminal connections, and programming parameters (Scribd ES99 Operation Card Manual
: A focused guide on symbols, button functions, and alarm clearing (Scribd).
Retrofit & Replacement: Information on upgrading an older ES99 unit to the newer ES3000 system (Atlas Copco Shop). ⚠️ Common Troubleshooting
Индикация ошибок на блоке управления Ceccato ES99 es99 controller manual pdf
The ES99 Controller (often branded by Micronova or Atlas Copco) is an energy-saving control module primarily used in rotary screw air compressors like the Atlas Copco GX7 and GX11 series. It manages basic compressor operations, including pressure monitoring and "run/standby" cycling to reduce energy consumption. Key Manual Details
The manual for this controller typically covers the following technical specifications and operations: Power Supply: Operates on 12 VAC, 50/60 Hz, 250 mA.
Front Panel Interface: Features a 3-digit LED display for pressure or timer readings and basic control buttons like Power/Standby and Timer indicators.
Error Indicators: The controller uses specific LED patterns to signal faults, such as motor overload or sensor errors.
Part Identification: It is frequently identified by Atlas Copco Part Number 2202 8420 00. Accessing the PDF
You can find full technical documentation and operation guides for the ES99 electronic card on the following platforms:
Electronic Card Operation Manual: Detailed steps for LED testing and startup phases can be found on Scribd.
General ES99 Controller Guide: Another comprehensive document covering wiring and system parameters is available via Scribd's ES99 Controller Document.
Compressed Air Maintenance: For broader context on how these controllers integrate into compressed air systems, refer to the Operating and Maintenance Manual. Note: If you are specifically looking for a manual for a Sharp ES-99
(a classic portable CD/radio player), the documentation is separate and focuses on equalizer modes and disc playback.
Are you troubleshooting a specific error code on your compressor, or do you need the wiring diagram for a fresh installation? Es99 Controller | PDF - Scribd
Uploaded by. Osh Benjamin. Download as PDF, TXT or read online on Scribd. Scribd ES99 Electronic Card Operation Manual | PDF - Scribd The ES99 is an electronic controller commonly used
The ES99 controller is most commonly an electronic control unit used for screw air compressors (such as the Atlas Copco GX7–GX11 series and Ceccato CSM MAXI) to manage operations like starting, stopping, and monitoring pressure or temperature. Note that "ES99" also refers to a Samsung digital camera, so ensure you are looking at the correct device type. 1. Screw Compressor Controller (Atlas Copco / Ceccato)
This controller, often referred to as the Electronikon 001 or ES99 Control Card, manages the compressor's operational cycle to improve energy efficiency. Primary Functions:
Automated Control: Starts and stops the compressor based on air demand.
Safety Monitoring: Tracks motor overload, oil temperature, and power supply issues.
Idle Management: Allows the compressor to run "unloaded" (idle) for a set period before shutting down to reduce wear and energy spikes. Key Button Operations:
Start/Stop: Dedicated buttons for manual operation. The stop sequence often includes a 30-second idle countdown.
Reset/Clear: Used to clear alarm indications after resolving a fault.
Test Mode: Holding specific buttons for ~3 seconds may trigger a LED control test to verify the display is working.
Manual Access: You can find digital versions on platforms like Scribd or through specialized equipment sites like Ceccato. 2. Other Devices named ES99
Samsung ES99 Camera: A compact digital camera. Its user manual covers shooting modes (Smart Auto, Program), photo/video playback, and basic maintenance.
Emko ESD-9950-N: A digital temperature controller often mistaken for "ES99." It features a main screen for set values and a password-protected parameter menu accessed by holding the encoder button for 5 seconds. Where to find the PDF ES99 Controller Manual | PDF - Scribd
ES99 Controller Manual | PDF. enChange Language, English. 100%(1)100% found this document useful (1 vote) 3K views10 pages. 2202842000 ES99 Atlas Copco Electronikon 001 PN Baud rate: 9600 Data bits: 8 Parity: None
ES99 controller most commonly refers to the electronic control module used in Atlas Copco air compressors, though it is also the model name for a Samsung digital camera 1. Air Compressor Controller (Atlas Copco / Ceccato) The ES99 (often manufactured by
) is a digital control module designed for energy saving in screw compressors like the Atlas Copco GX7–GX11 series. Monitor Enterprises, Inc. Core Functions
: Automatically manages compressor start/stop based on air demand to optimize energy efficiency. Operating Instructions
: Pressing the start switch initiates the compressor; it typically turns on 10 seconds after power is supplied to the card.
: Pressing the stop button begins an unloading phase where the compressor runs "empty" for approximately 30 seconds before stopping completely. Reset/Alarm Clear
: Pressing the designated button clears active alarm indications. Holding it for more than 3 seconds performs a LED control test. Safety Monitoring
: The unit signals faults such as thermal motor overload, incorrect power connection (rotation), and over-temperature. Technical Specs : Operates on 12 VAC (50/60 Hz) power supply. Monitor Enterprises, Inc. Manual Downloads ES99 Electronic Card Operation Manual (via Scribd). Ceccato ES99/3000 Overview (Direct PDF). ГК Новые технологии 2. Samsung Digital Camera (ES95/ES99) If you are looking for the camera manual, the Samsung ES99
is part of a series (including ES95 and ES96) that features automated shooting modes and digital image stabilization. 1WorldSync Key Features : Smart Auto mode, Live Panorama, and Face Detection. Manual Adjustments
: Users can manually adjust exposure, white balance, and ISO sensitivity through the "Shooting" menu. User Guide
: The full 126-page guide covers everything from basic shooting to editing photos on-camera. 1WorldSync Manual Download Samsung ES99 User Manual (Direct PDF). 1WorldSync Which specific device are you troubleshooting, the air compressor digital camera ES99 Electronic Card Operation Manual | PDF - Scribd
You're looking for a deep paper or a detailed manual for the ES99 controller in PDF format. Unfortunately, I don't have direct access to specific documents or manuals, but I can guide you on where to find them or provide general information about the ES99 controller.
The ES99 is a type of engine controller or governor controller used in diesel generators and other applications to regulate engine speed and, consequently, the output frequency and voltage of the generator. It's designed to ensure stable operation of the generator set under varying load conditions.
If you are still struggling to find the es99 controller manual pdf, these generic steps work for 80% of similar controllers:
| Symptom | Likely Cause | Parameter to Check |
| :--- | :--- | :--- |
| Display shows ---- or S.b | Sensor open circuit or wrong type | Set INP to match your sensor (e.g., Pt100) |
| Output LED on but heater stays cold | Relay contacts welded or SSR shorted | Check output type (OT = SSR or Rly) |
| Temperature overshoots wildly | PID too aggressive or auto-tune not run | Run auto-tune or manually reduce Pb (proportional band) |
| Keypad unresponsive | Lock parameter enabled | Find parameter LOC or LCK and set to 0 |
| Modbus no communication | Wrong baud rate/parity | Set BPS to 9600, PAR to N.8.1 |