Evenheat Kiln Model 5320 Manual May 2026

Evenheat Model 5320 is a versatile ceramic and glass kiln, typically featuring a Kiln Sitter Model K for manual shut-off control

. It is widely used for ceramics, glass fusing, and even metal heat treating. Quick Specifications Electrical : Operates on , drawing approximately 24 to 30 Amps : Rated at roughly 7200 Watts : Maximum temperature of (approx. 2300°F). Dimensions : Interior dimensions are roughly 17.5" Wide x 22.5" Deep Operation & Manual Control

For the manual version with infinite switches, the firing process involves gradual temperature increases: SW Art Glass

: Prop the lid open 1/2" to 1" and open the peephole to allow fumes to escape.

: Rotate switches to "Low" for roughly 30 to 60 minutes to reach ~1000°F. Medium Heat : Increase switches to "Medium" for another hour.

: Close the lid and peepholes, then turn switches to "High" until the desired cone melts or the target temperature is reached. Kiln Sitter : Ensure the Kiln Sitter

is properly loaded with a pyrometric cone; the mechanism will automatically trip the power once the cone softens. Maintenance & Troubleshooting Evenheat 5320 Electric Kiln | Other - BigIron Auctions

Introduction

Congratulations on purchasing the Evenheat Kiln Model 5320, a high-quality kiln designed for ceramic, glass, and metal artists. This manual provides essential information for safe and effective operation of your kiln. Please read this manual carefully before using your kiln. evenheat kiln model 5320 manual

Safety Precautions

1. Electrical Shock Hazard: The Evenheat Kiln Model 5320 is designed to operate on 240V, single-phase power. Ensure that the kiln is installed and maintained by a qualified electrician to prevent electrical shock.
2. Fire Hazard: Kilns can get extremely hot and may cause fires if not properly installed, maintained, or used. Keep flammable materials away from the kiln and ensure proper ventilation.
3. Burn Hazard: The kiln and its surfaces can reach extremely high temperatures, causing burns. Wear protective gear, including heat-resistant gloves and safety glasses, when operating the kiln.

Installation

1. Unpacking: Carefully unpack the kiln and its components from the shipping box. Inspect for any damage or missing parts.
2. Placement: Position the kiln on a level, stable surface, ensuring good airflow around the kiln. Keep the kiln at least 12 inches away from any combustible materials.
3. Electrical Connection: Connect the kiln to a 240V, single-phase power source, using a dedicated 20-amp circuit. Ensure the kiln is properly grounded.

Operating the Kiln

1. Controller: The Evenheat Kiln Model 5320 features a digital controller that allows you to set and control the firing schedule. Familiarize yourself with the controller's operation and features.
2. Firing Schedules: Use the pre-programmed firing schedules or create your own custom schedules. Ensure you understand the firing process and requirements for your specific materials.
3. Kiln Loading: Load the kiln with ceramic, glass, or metal pieces, following the manufacturer's recommendations and guidelines.

Maintenance

1. Regular Cleaning: Regularly clean the kiln and its components to prevent damage and ensure proper function.
2. Element Replacement: Replace heating elements as needed, following the manufacturer's instructions.
3. Thermocouple Maintenance: Inspect and replace the thermocouple every 100 firings or as needed.

Troubleshooting

1. Error Codes: The controller may display error codes in case of issues. Refer to the troubleshooting section in this manual or contact Evenheat Kilns for assistance.
2. Kiln Not Heating: Check the power supply, electrical connections, and heating elements if the kiln is not heating.

Specifications

• Model: 5320
• Volts: 240
• Amps: 20
• Watts: 4800
• Max Temperature: 2400°F (1316°C)
• Interior Dimensions: 24" x 18" x 12" (61 cm x 46 cm x 30 cm)

Warranty

Evenheat Kilns warrants the Model 5320 kiln to be free from defects in materials and workmanship for a period of one year from the date of purchase. Evenheat Model 5320 is a versatile ceramic and

Conclusion

This manual provides essential information for safe and effective operation of your Evenheat Kiln Model 5320. By following the guidelines and recommendations outlined in this manual, you will ensure optimal performance, safety, and longevity of your kiln. If you have any questions or concerns, please do not hesitate to contact Evenheat Kilns.

Essential Guide to the Evenheat Kiln Model 5320 Evenheat Model 5320

is a classic electric kiln favored by ceramicists, glass artists, and metalworkers for its versatility and reliability. This manual guide provides essential information for operating, maintaining, and troubleshooting your to ensure it remains a "workhorse" in your studio. Technical Specifications

Understanding the electrical requirements is critical for safe operation. Always check the nameplate on your specific unit for the most accurate details.

Voltage: Standard single-phase 240V (also common in 208V configurations). Amperage: Approximately 30 Amps. Wattage: Roughly 7,200 Watts. Chamber Dimensions: Generally 17.5" Wide x 22.5" Deep.

Maximum Temperature: Typically rated up to 2350°F (Cone 8), though firing consistently to Cone 6 is often recommended for longevity. Operational Instructions

The 5320 model often features a manual kiln sitter (Model K) and infinite switches for temperature control. Manual Firing Procedure How to Operate a Manual Evenheat Kiln Electrical Shock Hazard : The Evenheat Kiln Model

---

Final Verdict

Don’t let a missing manual stop you. The Evenheat 5320 is a workhorse—simple, repairable, and easy to learn. Use the legacy resources above, treat it with respect, and you’ll be firing beautiful work in no time.

Have a PDF of the Evenheat 5320 manual? Drop a link in the comments to help the next potter in need.

---

Disclaimer: This post refers to a discontinued model. Always verify voltage and wiring before operating any used kiln. If in doubt, consult a licensed electrician or kiln technician.

Market & Technical Intelligence Report: Evenheat Kiln Model 5320

Subject: Technical Profile and Operational Overview Model: Evenheat 5320 Manufacturer: Evenheat Kiln, Inc.

---

Section 7: Upgrades and Accessories Mentioned in the Manual

The Evenheat Kiln Model 5320 manual dedicates an appendix to approved modifications:

• Furnace Cement: For minor brick repair. Evenheat recommends their proprietary cement, but routine high-temp furnace cement (rated to 2500°F) works.
• Element Replacement Kit: Part # EL-5320. The manual includes a diagram for winding the elements through the grooves. Never stretch the element while hot.
• Thermocouple relocation kit: For glass fusers, the manual shows how to relocate the TC to the top arch for more even reading.
• Door safety switch: Not standard, but the manual provides wiring instructions for an add-on interlock switch to prevent operation with door open.

2. Technical Specifications

Specifications may vary slightly based on the specific production year and selected options (e.g., 3-phase vs. 1-phase).

• Interior Dimensions: Approximately 18" Diameter x 36" Deep.
• Exterior Dimensions: Approximately 28" W x 31" D x 51" H (with stand).
• Capacity: ~5.3 Cubic Feet.
• Voltage: 208 Volts (Standard for the "20" suffix).
• Phase: Available in Single Phase or Three Phase.
• Amperage: Approximately 48 - 50 Amps (varies by phase).
• Wattage: Approx. 10,000 - 10,400 Watts.
• Max Temperature: Cone 10 (2,350°F / 1,290°C).
• Element Configuration: Typically features heavy-gauge Kanthal A-1 elements.
• Wiring Configuration: Usually requires a 60 Amp circuit breaker and 6-gauge copper wire (check local codes).

Safety & operation highlights (from standard kiln manuals)

• Verify electrical supply matches kiln rating before installation.
• Provide required clearances from combustible materials and adequate ventilation.
• Never operate kiln unattended without proper safeguards; keep away from flammable vapors.
• Use kiln wash on shelving; load evenly; avoid touching elements or thermocouple.
• Allow cooling before opening; use protective gloves when handling hot ware.
• Follow recommended firing schedules for materials (ceramics vs. glass) to avoid damage.

---