Factory Tool V1.64 May 2026

The Factory Tool v1.64 (often stylized as FactoryTool) is a Windows-based utility specifically used to flash firmware onto devices powered by Rockchip (RK) processors, such as Android TV boxes, tablets, and development boards. Prerequisites A Windows PC: Compatible with Windows 7, 10, or 11.

USB Driver: Ensure the Rockchip USB Drivers (often called Rockchip Driver Assistant) are installed so your PC recognizes the device.

Firmware File: You need the correct .img firmware file specifically made for your exact device model.

Connection: A high-quality USB cable (usually USB-A to USB-A or USB-C depending on the port). Step-by-Step Guide 1. Setup the Tool Download and extract the FactoryTool v1.64 zip folder.

Open the folder and run FactoryTool.exe as an administrator.

Language Change (If needed): If the interface is in Chinese, look for a button labeled "Language" or a globe icon at the top right to switch it to English. 2. Load the Firmware factory tool v1.64

Click the Firmware button (sometimes represented by a folder icon or labeled "Firmware" in the top left).

Browse your computer and select the .img firmware file you downloaded.

Wait for the tool to verify and load the file (this may take a few seconds). 3. Connect Your Device (The "Flash Mode")

This is the most critical step. Your device must be in Maskrom or Loader mode to be detected: Power off the device.

Press and hold the Reset button (usually hidden inside the AV port or a small pinhole). The Factory Tool v1

While holding the button, connect the device to your PC via the designated USB port (often marked "OTG" or "USB 1").

Once the tool shows a "Connected" message or a colored square changes color, release the reset button. 4. Run the Flash

Select the Restore option (recommended for a clean install) or Upgrade. Click the Run (or Start) button.

The tool will show a progress bar indicating "Downloading Boot," "Check Chip," and "Download Firmware". Do not disconnect the cable or power during this process. 5. Completion

Once the progress bar reaches 100% and turns green with a Success message, click Stop. Disconnect the USB cable. Do not store secrets in templates

Reboot the device. The first boot after flashing can take 5–10 minutes as it initializes the new system. Troubleshooting Tips

Device Not Found: Try a different USB port (motherboard ports are more stable than front-panel ones) or a different cable. Re-install the Rockchip drivers.

Flash Failed at 0%: This usually indicates a driver issue or that the device is not properly in Maskrom/Loader mode.

Incorrect Firmware: If you flash the wrong firmware, the device may "brick." Ensure the firmware version matches your device's chipset (e.g., RK3318, RK3328, RK3566). How to flash a rockchip TV box using the FactoryTool v1.43e

Security & secrets

• Do not store secrets in templates.
• Use hooks to fetch secrets from secret managers at runtime (hook scripts can access environment variables).
• v1.64 adds telemetry control and prompts for telemetry on first run.

4) Example concise findings template (fill in after analysis)

• Name: factory tool v1.64
• Source URL / vendor: [URL]
• File hashes: SHA256:..., SHA1:..., MD5:...
• File type: ELF x86_64 binary / Python script / npm package
• Signed: Yes/No (signature details)
• Notable strings: [short list]
• Network endpoints observed: [domains/IPs]
• Files created or modified: [paths]
• Persistence: systemd service / cron / none
• Privilege actions: attempted setuid / sudo usage / file permission changes
• Risk rating: Low/Medium/High
• Recommended actions: isolate, revoke keys, patch/update, block domains, roll back, etc.

---

If you want, I can:

• Run a simulated checklist and produce the filled “Example concise findings template” assuming typical outputs, or
• Provide a ready-to-run command script with exact commands to execute each step on a Linux VM and collect artifacts. Which would you prefer?

---

Troubleshooting (common issues)

• "Unknown variable" — ensure variable declared in template.json or passed via --vars.
• Hook timeout/errors — increase hook timeout in factory.yaml or debug hook script independently.
• Permission errors on Windows — run as admin or adjust file permissions.

2. Version Specifics (v1.64)

• Release Date: (Find from release notes or vendor documentation)
• Differences from v1.63: Bug fixes, security patches, new features (e.g., added support for OPC UA, improved SQL logging, UI changes).
• Deprecations: Any removed features or incompatible modules.
• Known Issues: Critical bugs reported (e.g., memory leak, crash with certain PLC firmware).