A "firmware reset" for the Samsung Xpress SL-M2020W typically refers to one of two things: a standard factory reset to clear settings or a "Fix Firmware" (chipless reset) designed to bypass toner chip restrictions. 1. Standard Factory & Network Reset (Free)
This method clears your custom settings, such as Wi-Fi credentials or printer configurations. It is completely free and uses the physical buttons on the device. Hard Reset Procedure: Ensure the printer is powered On.
Press and hold the Stop/Cancel button for approximately 10–15 seconds. Release the button once the LEDs begin to flash. Restart the printer to complete the process.
Wi-Fi Reset: To clear only network credentials, hold the WPS button for about 5 seconds until the LED blinks. 2. "Fix Firmware" (Chipless Reset)
This is a permanent modification to the printer's internal software. It allows the printer to function without the digital chips found on Samsung MLT-D111 toner cartridges , essentially making the printer believe the toner is always at 100%.
Warning: This process often involves third-party software and can void your manufacturer's warranty. How it Works:
Identify Details: You must first print a "Configuration Report" and "Supplies Information" page to find your printer's Serial Number, Firmware Version, and CRUM number. To do this, hold the WPS button until the LED blinks, then release.
Download "Fix" File: Specialized firmware files are typically generated based on your specific CRUM/Serial number. While some older "free" versions might exist on forums, most reliable versions from sites like eReset or INKCHIP often require a small fee (around $13–$16) to generate a unique file for your device.
Installation: You connect the printer via USB and drag the customized .hd firmware file onto a provided usblist2.exe tool to flash the printer.
Final Step: Once flashed, you must physically cover the gold contacts on the toner chip with tape. 3. Official Firmware Updates
To perform a free firmware or factory reset on your Samsung Xpress M2020W Go to product viewer dialog for this item. firmware reset samsung m2020w free
, you can use the built-in button combinations on the printer's control panel. 1. Standard Factory Reset
This method resets the printer's settings to their original factory defaults without needing additional software. Step 1: Ensure the printer is powered On.
Step 2: Press and hold the Stop/Cancel button (or the WPS button, depending on your specific layout) for about 10–15 seconds until the LEDs flash .
Step 3: Release the button and wait for the printer to restart. 2. Network (Wi-Fi) Reset
If your goal is specifically to clear old Wi-Fi passwords or fix connection drops, follow these steps: Step 1: Power the printer on.
Step 2: Press and hold the WPS button for 5 seconds until the LED blinks .
Step 3: This clears stored network credentials, allowing you to reconnect using the Samsung Easy Wireless Setup . 3. Generating Status Reports
Before or after a reset, you may want to check your firmware version or toner life (CRUM series):
Configuration Report: Hold the WPS/Print Screen button for 10 seconds until the LED flashes once, then release .
Supplies Information: Hold the same button for 15 seconds until the LED stays solid green or flashes continuously, then release . Important Note on "Chipless" Firmware A "firmware reset" for the Samsung Xpress SL-M2020W
Many "free" firmware reset files found online are actually paid third-party "chipless" solutions designed to bypass toner chip requirements .
Official firmware updates from the HP Support site (which now manages Samsung printers) will often disable non-genuine cartridges .
If you are trying to bypass a "Toner Empty" message without buying a new chip, standard resets usually only work temporarily or not at all unless you use a modified firmware fix .
Are you performing this reset to fix a connectivity issue or to bypass a toner chip error? Samsung Printer Reset & Error Code Guides - Farbtoner
Reset: Turn on the device → hold the Stop/Cancel button for about 10–15 seconds until the LEDs flash → release → restart. Farbtoner.com GmbH Samsung Xpress SL M2020 M2023 M2024 M2026 M2027 M2029
Here’s a draft for a blog post titled “How to Perform a Firmware Reset on a Samsung Xpress M2020W (Free & Easy)” — written in a helpful, clear, and search-friendly style.
Use this if you only forgot the WiFi password but want to keep print settings (e.g., paper size, demo pages).
Step 1: Turn printer ON.
Step 2: Press the Menu button (looks like a stack of horizontal lines).
Step 3: Press the arrow keys until you see Network → Press OK. Method 2: Network Settings Reset (Less Drastic) Use
Step 4: Scroll to Network Reset (or “Reset Network”) → Press OK.
Step 5: The printer will ask “Yes/No”. Select Yes → Press OK.
Step 6: The printer will reboot. WiFi is now open (no password) until you reconfigure it via the WPS button or USB.
Because the reset clears your network, you must reconnect. Here is the free method to do that without extra software:
Samsung_M2020W_XXXX (XXXX is a unique code).http://192.168.3.1 (the printer’s default IP in AP mode).Alternatively, use the WPS button on your router and on the printer (press and hold the WPS button on the M2020W for 2 seconds).
In rare cases, the button sequence may fail. Do not panic. Try these free fixes before assuming hardware failure.
Use this for fixing print quality issues or clearing a “Jam” error that won’t go away.
Step 1: Turn printer OFF.
Step 2: Press and hold the Power button + Cancel button simultaneously.
Step 3: Keep holding for 5 seconds until all lights blink once, then release.
This just reboots the firmware without wiping data.