If your USB drive has suddenly stopped working, showing a "no media" error, or revealing its true capacity (common with fake high-capacity drives from sites like AliExpress), the FirstChip FC1178/FC1179 MpTools V1.0.5.2 is a highly effective "mass production" (MP) recovery tool designed to flash and restore these specific controllers. Key Features of V1.0.5.2
Controller Support: Specifically targets FirstChip FC1178 (3D, BC) and FC1179 (S, AB) series.
Fix Common Errors: Capable of reviving "bricked" drives that display as "No Media" in Disk Management or fail to format.
Truth-Testing: Automatically detects and restores the actual physical NAND capacity, which is essential for repairing fake "2TB" drives that are actually 32GB or 64GB.
No Installation Required: This is a portable utility; simply extract and run the executable. Quick Start Guide firstchip fc1178 fc1179 mptools v1052 link
Download: You can find this specific version on community technical repositories such as USBDev.ru or FlashBoot.ru.
Language: The interface typically starts in Chinese. Look for the Language toggle on the right-hand panel and select English.
Password: If prompted for a password when clicking "Settings," try leaving it blank and clicking OK, or use common defaults like 123456.
Flashing: Click Start to begin the scanning and flashing process. Note that a full scan for a 16GB–32GB drive can take up to an hour. Pro Tips for Success If your USB drive has suddenly stopped working,
Hardware Check: For the best results, use a direct USB 2.0 port on your motherboard rather than a hub.
NAND Identification: If the tool says "Unknown Flash," you may need a newer version like the FirstChip MpTools 2024 release.
Data Loss Warning: Using this tool will permanently erase all data currently on the drive as it rewrites the controller firmware. FirstChip FC1178/FC1179 MpTools V1.0.5.2 (2022-06-01)
| Feature | FC1178 | FC1179 | | :--- | :--- | :--- | | Interface | USB 2.0 | USB 3.0 / 2.0 backward compatible | | Speed | Up to 25 MB/s | Up to 100 MB/s | | Common Issue | Corrupt firmware after unsafe eject | Overheating leading to NAND lock | | MPTool Needed | v1052 or newer | v1052 or newer (specific toggle) | Step 2: Download and Extract
Despite their differences, both controllers use the same MPTool framework. Attempting to use older tools (v1024, v1030) will result in "Device Not Match" or "Bad Block Over Setting" errors. Version 1052 is the earliest stable build that natively supports both chips.
.7z file.C:\MPT_FC1178_v1052).Extract the tool to a short path (e.g., C:\MPTools\). Run MPTool.exe as Administrator.
✅ Download from USBDev or a community-verified mirror.
✅ Run as admin with antivirus disabled.
✅ Use USB 2.0 port.
✅ Set password 320 to access settings.
✅ Scan for bad blocks thoroughly.
✅ Re-plug after success.
If you follow this guide, your “dead” USB flash drive has a >80% chance of resurrection. And if the hardware is truly dead (short circuit or physically damaged NAND), at least you now know how to use the most powerful recovery tool for FirstChip controllers.
If MPTools doesn’t see the drive even though Windows does:
ROM or RST or two large pads near the crystal oscillator.For FC1179, common pad locations: pin 29–30 of flash chip, or two unmarked vias near controller.