Gigamax — Controller Driver

Content Title: Gigamax Controller Driver – Official Download & Setup Guide

✅ For FTDI

Installation (Windows)

  1. Download the latest Gigamax driver package from the vendor support site or included media.
  2. Extract the ZIP and run the installer (Setup.exe) as Administrator.
  3. If installing manually:
    • Open Device Manager → locate Unknown device or storage controller.
    • Right-click → Update driver → Browse my computer → Pick driver folder.
    • Reboot when prompted.
  4. Post-install: open Gigamax management utility (if provided) to configure RAID and check firmware.

Installation (Linux)

  1. Check kernel support: some Gigamax controllers use in-kernel drivers; others require vendor modules.
  2. If vendor provides a .tar.gz module:
    • Extract and build: 
      sudo tar xzf gigamax-driver.tar.gz
cd gigamax-driver
sudo make
sudo make install
sudo modprobe gigamax
    • Or install DKMS package if available for automatic rebuilding across kernels.
  3. Verify with lspci -k to see kernel driver in use and dmesg for initialization logs.
  4. Use mdadm or vendor utility for RAID management if controller exposes arrays in passthrough.

Why You Need the Official Gigamax Controller Driver

While generic plug-and-play drivers (like Microsoft’s default Xbox 360 driver) might allow basic functionality, they cripple the advanced features of Gigamax hardware. Here is why you should never use a Windows default driver for your Gigamax device.