Before attempting complex resets, try the manufacturer's default login credentials: Username: admin Password: 123456 If these do not work, follow the recovery methods below. Method 1: Dynamic Code (Official Support)
Hi Sharp provides a "Dynamic Code" feature on most modern units for secure recovery.
Generate the Code: On the DVR login screen, click on "Forgot Password" or "Retrieve Password".
Access Dynamic Code Page: Navigate to the "Dynamic Code" section. A unique code will be displayed on the screen.
Submit for Reset: Take a clear photo or screenshot of this page.
Contact Support: Email the photo along with your region, model number, and serial number to Hi Sharp Support (sales@hisharp.com.tw) or your local distributor.
Apply Temporary Password: They will provide a temporary password valid for that specific day. Use it to log in and immediately set a new permanent password. Method 2: Hardware Reset (Motherboard Jumper)
If you cannot access the software menu, you can perform a factory reset using the internal hardware.
Open the Unit: Disconnect the power and unscrew the DVR casing.
Locate the Jumper: Look for two metal pins on the motherboard often labeled as G1, J1, or RESET.
Short the Pins: Use a conductive tool like tweezers or a screwdriver to bridge the two pins.
Power On: While keeping the pins shorted, plug in the power and wait approximately 60 seconds until you hear a beep or see the system reboot.
Remove Bridge: Release the connection once the system initializes. The password should return to the default (123456). Method 3: Password Recovery Tools
Some "repack" methods involve using universal CCTV password generators based on the system date.
Identify the Date: Check the date displayed on your DVR's live view (e.g., 2000-01-01).
Generate a Super Password: If the system date has reset to a very old date (often after removing the CMOS battery), tools like CodeCalculator can generate a temporary "Super Password" based on that specific date.
Example: For a reset date of 20000101, some calculators generate a code like NpSZOo. Important Safety Tips FAQ - Support | HI SHARP INTELLIGENCE
Getting locked out of your surveillance system is a major headache, but resetting a Hi Sharp DVR
is straightforward if you know where to look. Whether you're dealing with a forgotten admin password or just setting up a secondhand unit, here is the complete guide to regaining access. Quick Fix: Common Default Passwords
Before trying more complex reset methods, test the factory default credentials. Many Hi Sharp models (including those in the KD and N4 series) ship with these common combinations: Username: admin | Password: 123456 Username: admin | Password: admin Username: admin | Password: (Leave blank) Method 1: Using the "Forgot Password" Wizard
If your DVR is connected to a monitor and mouse, use the built-in recovery options.
Access the Login Screen: Right-click on the live view and select Main Menu. hi sharp dvr reset password repack
Select Forgot Password: Look for a Forgot Password or Retrieve Password button. Dynamic Code/QR Code:
Some models will display a Dynamic Code page. You may need to take a photo of this and send it to your regional distributor or Hi Sharp support to receive a one-time reset code.
Newer models may display a QR Code. Scan this using the Hi Sharp EX or Superlive Plus app to receive a verification code via your registered email. Method 2: The Physical "Hard Reset"
If you cannot access the software menu, you can force the device back to factory settings using the internal hardware.
The Reset Button: Some units have a small physical button on the motherboard or a pinhole on the back. Power off the DVR. Hold the reset button.
Power the DVR back on while continuing to hold the button for 15–30 seconds.
The "Jumper" Method: If there is no button, look for two pins labeled TP1, TP2, or G1 on the motherboard. Turn off the power. Short-circuit the two pins using a screwdriver or tweezers.
Power the device on while keeping the pins shorted for about 30 seconds. Method 3: Technical Support Reset
If the above steps fail, you will need to contact Hi Sharp directly. They typically require the following information to generate a master password:
Model Number (found on the sticker at the bottom of the DVR). Serial Number.
The Current Date/Time displayed on the DVR’s screen (this is often used as a seed for password generators). Post-Reset: Securing Your System
Once you’ve regained access, immediately do the following to avoid future lockouts: How to Reset DVR to Factory Default without Password?
The air in the small surveillance room was thick with the hum of servers and the smell of stale coffee. stared at the
DVR unit, its single red light blinking like an accusatory eye. He had been "repacking" the system for a client—upgrading the storage and cleaning the internal components—but when he went to finalize the setup, the login screen mocked him. "Admin," he typed. "123456." Access Denied. "Admin," he tried again. "888888." Access Denied.
The client was coming in an hour, and the "repack" was supposed to be a simple job. If he couldn't reset the password, the entire security history of the building would remain locked behind a digital wall. He remembered a tip from an old manual: many
units rely on a specific hardware reset for these "repack" scenarios. Elias reached for his precision screwdriver set. He carefully removed the outer casing, revealing the green motherboard within. Near the CMOS battery, he spotted it—a tiny pair of solder pads labeled
With his heart racing, he took a pair of tweezers and bridged the gap between the pads while plugging the power back in. A long, sharp
echoed through the room. The screen flickered, the logo appeared, and then—the holy grail: the Setup Wizard. He quickly navigated to the Support Page
on his tablet to confirm the factory defaults. He entered "Admin" for both fields, and the system clicked open. The "repack" was a success, and as the client walked in ten minutes later, Elias was casually wiping a smudge off the polished black casing, the red light now a steady, peaceful glow. Common Reset Methods for HI SHARP DVRs
If you are currently facing a locked unit, try these steps derived from technical standards: Default Credentials IP Finder Tool : Download the official HI SHARP IP Finder
to locate the device on your network and attempt a remote configuration. Hardware Reset A firmware (
: Many models feature a physical reset button or internal jumper pins that, when held during power-up, will restore factory settings.
To reset the password on a Hi Sharp DVR , you typically need to use a dynamic code provided by technical support or a hardware-based factory reset if you cannot access the menu. 🔓 Password Recovery (Software Method)
If you are locked out but can see the login screen, follow these steps to get a temporary reset code: Locate Dynamic Code: On the login screen, click "Forget Password" and navigate to the "Dynamic Code" Capture Info: Take a clear screenshot or photo of the dynamic code page. Contact Support: Email the photo along with your model number serial number sales@hisharp.com.tw or contact your regional distributor. Apply Code:
Once you receive the response, enter the provided verification code to create a new admin password. www.hisharp.com ⚙️ Default Credentials
If you have just performed a reset or are setting up the device for the first time, try these factory defaults: (case sensitive) www.hisharp.com 🛠️ Hardware Factory Reset
If software methods fail, you can manually reset the motherboard to restore original factory settings: Internal Reset Button:
Power off the unit, open the casing, and look for a small button labeled
on the PCB. Hold it for 5–30 seconds while powering the device back on. Shorting Jumper Points:
Some models use two metal contact points (JP1/JP2) instead of a button. Short these points with a screwdriver or tweezer while booting the device until you hear a beep. CMOS Battery Removal:
For older models, removing the small silver coin battery for 1–2 minutes can sometimes clear the system clock and stored password data. 💡 Pro Tips for "Repacking" FAQ - Support | HI SHARP INTELLIGENCE
The most official resource for resetting a Hi Sharp DVR is the Support FAQ page on the Hi Sharp Intelligence website. According to their documentation, the primary method for password recovery involves generating a "dynamic code" and contacting their support team. Official Reset Method
If you have forgotten your password, follow these steps as outlined by Hi Sharp support:
Generate a Dynamic Code: On the DVR login screen, navigate to the "Forget Password" section, then select "Retrieve Password" and click on the "Dynamic Code" page.
Contact Support: Take a screenshot of the dynamic code page. You must then share this screenshot with your regional distributor, the seller, or email sales@hisharp.com.tw.
Provide Device Details: When emailing, specify your region, model number, and serial number to receive a valid reset code. Common Default Credentials
If you are setting up the device for the first time or after a factory reset, try these default credentials: Username: admin Password: 123456 or 1234 Hardware Reset Options
If the software-based recovery is not an option, some Hi Sharp or compatible H.264 DVR models support a physical hardware reset:
External Reset Button: Look for a small pinhole or button labeled "Reset" on the back or bottom of the device. Press and hold it for 10–30 seconds while the device is powered on.
Internal Jumper (G1): For models without an external button, you may find two metal pins (often labeled G1) on the motherboard. Shorting these pins with a conductive tool (like tweezers) while powering on the unit can trigger a factory reset.
CMOS Battery Removal: Some users have successfully reset older units by removing the internal coin-sized battery for 5–10 minutes, which may reset the system clock and password to a factory state.
For further technical documentation, you can also refer to the Hi Sharp Quick Guide for NVRs. How it works: You flash the repacked firmware
Do you have the model number or serial number from the sticker on your device to check for specific hardware reset instructions? How to Reset DVR Password
If you are trying to reset a Hi-Sharp DVR password, there isn't one "universal" code, but you can usually get back in using one of the following methods based on the specific hardware or firmware version: 1. Default Login Credentials Before trying a reset, test the standard factory defaults: Username: admin Password: (Leave blank), 123456, 888888, or 000000. 2. QR Code / Forgot Password Button
Most modern Hi-Sharp systems include a "Forgot Password" option on the login screen:
Click Forgot Password or a small Lock icon next to the password field.
Scan the QR code that appears using the mobile app associated with the device (often Hik-Connect or a brand-specific viewer).
The app will generate a security code or send a reset link to the reserved email address you set up during the initial installation. 3. Dynamic Password / Super Password If the device is older and doesn't have a QR code option: Click Retrieve Password on the login screen.
Select Dynamic Password. You will see a unique string of characters or a date-based code.
Take a photo of this screen and contact Hi-Sharp Technical Support or your local distributor. They can use that code to generate a one-time "Super Password" that expires within 24 hours. 4. Physical Reset Button
Check the back of the DVR or the internal motherboard for a small Reset pinhole or button: Power off the unit. Press and hold the Reset button.
Power the unit back on while still holding the button for 15-30 seconds.
This should restore the unit to factory defaults, including the password.
Do you have access to the mobile app originally paired with this DVR, or are you starting from scratch?
Meta Description: Forgot your Hi Sharp DVR password? Discover everything about the "Hi Sharp DVR reset password repack," including safe methods, firmware tools, step-by-step recovery, and common pitfalls to avoid.
Warning: Proceed at your own risk. Incorrect usage can erase your hard drive, brick the DVR, or void any remaining warranty.
When you download a file labeled “hi sharp dvr reset password repack.rar” or “.zip”, what’s inside?
A typical repack contains:
How it works:
You flash the repacked firmware via the DVR’s USB port (or TFTP over Ethernet). The modified firmware overwrites the user database, setting the admin password back to a default like 12345 or blank (no password). This is a firmware-level reset, not a simple backdoor.
Warning: Many repacks circulating on forums are fake or malware. Only download from trusted security forums like CCTV Forum, Use-IP, or Reddit’s r/homesecurity with verified user feedback.
Important: Resetting a DVR password should only be performed on devices you own or manage. Unauthorized access is illegal.
The term “repack” in the context of DVR password recovery refers to a specific type of software tool or firmware package that is “re-packed” (recompressed, modified, or pre-configured) to bypass or reset the administrator password. Unlike official password reset tools, which may require registration, serial numbers, or cloud verification, repack tools are often community-made, offline solutions designed to work on older or disconnected Hi-Sharp units.
Key reasons users search for a “repack”: