How To Install Ezp2019 Driver Windows 10 Here

Installing the EZP2019 programmer driver on Windows 10 often requires manually bypassing security features, as the drivers are frequently unsigned. To successfully set up your device, you must disable Driver Signature Enforcement and then update the driver via Device Manager. Step 1: Disable Driver Signature Enforcement

Windows 10 blocks unsigned drivers by default. You must restart your computer into a special mode to allow the installation. Open Settings: Go to Start > Settings > Update & Security. Access Recovery: Select Recovery from the left sidebar.

Restart to Advanced Startup: Under Advanced startup, click Restart now.

Navigate Menus: After the blue screen appears, select Troubleshoot > Advanced options > Startup Settings > Restart.

Disable Enforcement: When the list of options appears after the reboot, press 7 or F7 on your keyboard to select Disable driver signature enforcement.

Your computer will reboot normally, but will now allow you to install the EZP2019 driver. Step 2: Install the EZP2019 Driver how to install ezp2019 driver windows 10

Once back in Windows, connect your EZP2019 programmer to a USB port using the provided cable. EZP2019 Programmer V2.0 Driver for Windows 10 6

Installing the driver for the EZP2019+ programmer on Windows 10 often requires disabling Driver Signature Enforcement

, as the drivers are frequently unsigned. While some versions include an installer_x64.exe install_x86.exe

that may work directly, a manual installation via Device Manager is often necessary for stability on Windows 10. Step 1: Disable Driver Signature Enforcement

Windows 10 security prevents the installation of unsigned drivers by default. You must disable this feature to proceed. How To Disable Driver Signature Enforcement in Windows 10 Installing the EZP2019 programmer driver on Windows 10

Step 3: Connect the EZP2019 Programmer

1. Plug the EZP2019 into a USB port on your computer (directly, not through a hub).
2. Open Device Manager (right-click Start button → Device Manager).
3. Look under Other devices or Ports (COM & LPT).
   You may see:
   • EZP2019 with a yellow triangle, or
   • CH341A or USB-SERIAL CH340 (if partially recognized).

Step 1: Understand the Chipset

Here is the secret that the manual won't tell you: The EZP2019 doesn't have a proprietary driver. Under the hood, it almost certainly uses a CH340 or CH341 USB-to-Serial chip.

Windows 10 is usually pretty good at finding drivers automatically, but for these specific chips, it often drops the ball. We need to force-feed the computer the correct software.

Step 5.4 – Update Driver

1. Right‑click the device → Update driver.
2. Select Browse my computer for drivers.
3. Click Browse → navigate to the extracted driver folder (C:\EZP2019_Driver).
4. Check Include subfolders.
5. Click Next.

Step 2: Download the Driver

The easiest way to get the correct driver is from the official manufacturer of the chip, Nanjing Qinheng Microelectronics (WCH).

1. Head over to the WCH official download page (wch.cn) or search for "CH340 driver Windows 10".
2. Look for the CH340/CH341 USB to Serial Port Driver.
3. Download the ZIP file (usually labeled something like CH341SER.EXE or CH341SER.ZIP).

Pro Tip: If you can't find the official site, reputable Arduino websites almost always host these drivers because Arduino clones use the exact same chip.

Step 4: Verify the Installation

Open Device Manager again. You should now see: "USB-SERIAL CH341A (COM3)" under Ports (COM & LPT). There should be no yellow triangles. Plug the EZP2019 into a USB port on

Troubleshooting Method 1: If you still see a yellow triangle, proceed to Method 2.

---

Step 5: The Software

You have the driver, but you need the interface to actually use the programmer.

Don't bother looking for a "EZP2019" app on the Microsoft Store. You need the dedicated software.

• Search for: "EZP2019 Software" or "EZP2019 v3.0" (or the latest version available).
• Download: It usually comes as a RAR or ZIP file.
• Run: There is no installer for the software itself. Just extract the folder and double-click the .exe file inside.

If the software opens and detects your connected chip automatically, you have successfully conquered the driver headache!

Step 5.3 – Locate the Device

Look under:

• Other devices → “EZP2019” or “Unknown device”
• Universal Serial Bus devices → “USB Serial Converter” or similar

4. Disable Driver Signature Enforcement (if needed)

Windows 10 may block unsigned drivers. To bypass:

1. Open Settings → Update & Security → Recovery.
2. Under Advanced startup, click Restart now.
3. After reboot, choose Troubleshoot → Advanced Options → Startup Settings → Restart.
4. Press 7 or F7 to select Disable driver signature enforcement.

Note: This step is only required for unsigned drivers. Once installed, the setting resets on next normal boot.