Mtk Driver Mediatek Preloader Usb Vcom Link - How To Install

Installing the MediaTek (MTK) Preloader USB VCOM driver is a multi-step process that often requires disabling Windows security features because the drivers are frequently unsigned. This driver is essential for tools like SP Flash Tool to communicate with your device's bootloader. 1. Preparation: Disable Driver Signature Enforcement

Windows usually blocks unsigned drivers. You must disable this check to install the VCOM driver successfully. Driver Easy Update & Security Advanced startup Restart now Troubleshoot Advanced options Startup Settings After the reboot, press on your keyboard to select "Disable driver signature enforcement" 2. Manual Driver Installation

Since these drivers often don't have an automatic installer, you must add them as "Legacy Hardware".

Installing MTK Driver: A Step-by-Step Guide to Mediatek Preloader USB VCOM

Introduction

Mediatek (MTK) is a popular chipset used in many Android devices. When it comes to flashing firmware, unlocking bootloaders, or performing other low-level operations, a proper driver installation is crucial. In this paper, we will focus on installing the Mediatek Preloader USB VCOM driver, also known as the MTK driver.

What is Mediatek Preloader USB VCOM?

The Mediatek Preloader USB VCOM driver is a communication interface that allows your computer to recognize and interact with Mediatek-based devices. The Preloader is a small program that runs on the device before the operating system loads, and it plays a vital role in the flashing process. The USB VCOM (Virtual COM Port) driver enables communication between your computer and the device over USB. how to install mtk driver mediatek preloader usb vcom

Why is the MTK Driver Necessary?

Without the MTK driver, your computer will not be able to detect your Mediatek-based device when performing low-level operations. This driver is essential for:

1. Flashing firmware: The MTK driver enables SP Flash Tool, a popular tool for flashing firmware on Mediatek devices.
2. Unlocking bootloaders: The driver allows tools like Fastboot to communicate with the device.
3. Performing device diagnostics: The MTK driver facilitates communication between the device and the computer for diagnostic purposes.

Step-by-Step Installation Guide

Installing the Mediatek Preloader USB VCOM driver is relatively straightforward. Follow these steps:

For Windows 10 and later:

1. Download the driver: Obtain the Mediatek Preloader USB VCOM driver from a reliable source, such as the official Mediatek website or a reputable Android development forum.
2. Extract the driver: Unzip the downloaded file to a folder on your computer.
3. Connect your device: Connect your Mediatek-based device to your computer using a USB cable.
4. Open Device Manager: Press the Windows key + X and select Device Manager.
5. Locate the device: In Device Manager, look for your device under "Other devices" or "Unknown devices."
6. Update driver: Right-click on the device and select "Update driver."
7. Browse for driver: Choose "Browse my computer for driver software" and navigate to the extracted driver folder.
8. Install driver: Follow the prompts to install the driver.

For Windows 7 and 8:

1. Download the driver: Obtain the Mediatek Preloader USB VCOM driver from a reliable source.
2. Extract the driver: Unzip the downloaded file to a folder on your computer.
3. Connect your device: Connect your Mediatek-based device to your computer using a USB cable.
4. Open Device Manager: Press the Windows key + R, type devmgmt.msc, and press Enter.
5. Locate the device: In Device Manager, look for your device under "Other devices" or "Unknown devices."
6. Update driver: Right-click on the device and select "Update driver."
7. Browse for driver: Choose "Browse my computer for driver software" and navigate to the extracted driver folder.
8. Install driver: Follow the prompts to install the driver.

Troubleshooting

If you encounter issues during driver installation, try:

• Rebooting your computer and device
• Using a different USB port
• Ensuring the driver is compatible with your device and operating system
• Uninstalling and reinstalling the driver

Conclusion

In this paper, we have discussed the importance of installing the Mediatek Preloader USB VCOM driver for Mediatek-based devices. By following the step-by-step guide, you should be able to successfully install the driver on your Windows computer. If you encounter any issues, refer to the troubleshooting section or seek assistance from online communities or Mediatek support resources.

References

• Mediatek official website
• Android development forums (e.g., XDA Developers)
• SP Flash Tool documentation

Appendix

• Screenshot of Device Manager with Mediatek device detected
• Screenshot of driver installation process

By following this guide, you should be able to install the Mediatek Preloader USB VCOM driver and perform low-level operations on your Mediatek-based device.

---

Step 1: Download the Correct Driver

Download MTK USB Drivers (v1.0.5 or newer) from a trusted source. The package typically includes: Installing the MediaTek (MTK) Preloader USB VCOM driver

• MTK_USB_Driver_v1.0.5.exe (installer)
• Or manual usb2ser_Win7.inf / usb2ser_Win8.inf files.

Common filename: MTK_Driver_Auto_Installer_1.0.5.zip

---

Method B: Permanently Disable via Group Policy (Windows Pro/Enterprise only)

1. Press Win + R, type gpedit.msc, press Enter.
2. Navigate to: User Configuration → Administrative Templates → System → Driver Installation.
3. Double-click “Code signing for device drivers”.
4. Set to Enabled → Under Options, set to Ignore → OK.
5. Restart your PC.

Step 1: Prepare Device

• Power off the phone completely.
• Remove battery (if removable) for 10 seconds, then reinsert.

Step 3: Install the MTK USB VCOM Driver - Method 1 (Auto Installer)

The easiest method when driver signature is disabled.

1. Extract the downloaded driver ZIP file.
2. Locate MTK_Driver_Auto_Installer.exe (or similar name).
3. Right-click the file and select Run as Administrator.
4. A command prompt window will appear and disappear quickly. Do not be alarmed.
5. Connect your powered-off MediaTek device via USB.
6. Open Device Manager (Win + X → Device Manager).
7. Look under Ports (COM & LPT). You should see “MediaTek USB Port” or “MTK USB Port (COMx)”.
   • Important: This port appears for 5–10 seconds only while the phone is in preloader mode. If you see it and it disappears, the driver works.

Problem 1: "The hash for the file is not present" / Driver Signature Error

• Solution: You missed disabling driver signature enforcement. Reboot and repeat the process. On Windows 11, you may need to also disable Memory Integrity (Core Isolation) in Windows Security → Device Security.

Chapter 6: The Verification

Now came the real test. Elias unplugged the phone. He took a breath. He repeated the process: holding the reset button with the paperclip, plugging the USB cable into the phone.

He watched the Device Manager like a hawk.

The "Ports" section expanded. "MediaTek PreLoader USB VCOM Port (COM4)" appeared.

It stayed. It didn't vanish.

"Gotcha," Elias whispered.

The bridge was built. The computer could now see the phone's deepest level of consciousness, the Boot ROM. The COM port number (COM4) was the address his flashing tool (SP Flash Tool) needed to send the firmware packets.

Step 2: Connect Your Phone in PreLoader Mode

1. Power off your MediaTek phone completely.
2. Do not turn it on.
3. Connect the phone to your PC via USB cable.
4. Listen for the USB connection sound and immediately open Device Manager (Right-click Start → Device Manager).

Step 1: Download the MTK Driver

1. Download the driver: You'll need to download the MediaTek USB VCOM driver. There are a few versions out there, but a popular one is the "MTK USB Allwinner, SPD, and MTK Drivers" package. You can search for it online or look for it on forums like XDA Developers.
2. Extract the package: Once downloaded, extract the package to a folder on your computer, e.g., C:\MTK_Drivers.