How To Reset Epson L1250 Printer May 2026
REPORT: Epson L1250 Printer Reset Procedure
Date: October 26, 2023
Subject: Procedures for Resetting the Epson L1250 Ink Tank Printer
Prepared For: User Technical Support / End-User Documentation
Method B – Using WIC Reset Utility (paid, safer)
WIC Reset (www.wic-support.com) is a professional tool: How To Reset Epson L1250 Printer
- Download WIC Reset Utility.
- Connect printer via USB.
- Buy reset key (~$10 USD) or use free trial for counter check.
- Follow on-screen instructions.
Step 6: (Optional but Advised) Empty or Replace the Waste Ink Pad
Now that the counter is reset, the physical pad is likely saturated. You have two options:
- Option A – Replace: Buy a replacement waste ink pad kit for the L1250. Open the printer casing (search YouTube for disassembly guides), swap the pad, and reassemble.
- Option B – External Waste Tank Mod: Drill a small hole in the printer casing, attach a silicone tube from the waste pump outlet to an external bottle. This is a permanent fix.
If you do nothing, the saturated pad will eventually leak ink inside the printer, damaging the mainboard and print head. REPORT: Epson L1250 Printer Reset Procedure Date: October
4) Firmware or driver-related reset
- Ensure you have the latest Epson drivers from Epson support for L1250.
- Reinstall the driver: uninstall current driver, restart PC, install fresh driver.
- Update printer firmware if Epson provides an update.
When to use: persistent communication errors or software-caused status misreports.
Step 3: Read the Current Counter Levels
- In WICReset, select your printer model (Epson L1250) from the dropdown list.
- Click "Read Waste Counters".
- The software will show you two numbers: the main waste ink counter and the borderless printing counter.
- If either number is close to or above 100%, you need a reset.
5. How to Reset Epson L1250 Network and Factory Settings (No Software Needed)
If you only need to reset Wi-Fi settings or restore factory defaults (not the waste ink counter), follow these steps directly on the printer’s physical buttons: Method B – Using WIC Reset Utility (paid,
- Turn on the printer.
- Press and hold the "Wi-Fi" button (the one with the antenna icon) for about 5 seconds until the Wi-Fi light starts flashing quickly.
- Press and hold the "Cancel/Stop" button (circle with a triangle inside) while still holding the Wi-Fi button.
- Wait for all lights to flash simultaneously – this indicates that network settings have been erased.
- Release both buttons. The printer will restart with factory network settings.
To reset ALL settings (including language, paper size defaults, and power save timers):
- There is no one-button hard reset for total factory settings on the L1250. You must use the Epson Adjustment Program's "EEPROM Reset" function (advanced users only).
6. Common Problems and Troubleshooting During Reset
Even with proper steps, issues can arise. Here is how to solve them:
| Problem | Likely Cause | Solution |
|---------|-------------|----------|
| WICReset doesn't detect printer | Driver issue or USB cable | Reinstall Epson L1250 drivers. Switch USB ports or use a different cable. |
| Reset fails at 50% | Printer interrupted power | Restart printer and PC. Put printer in service mode manually. |
| Error returns immediately | Physical pad is full | The counter reset worked, but the sensor reading is blocked by actual liquid. You must replace the pad. |
| "Communication error" | Firewall blocking the software | Temporarily disable Windows Defender or third-party antivirus. |
| Lights flashing after reset | Wrong reset key or model selection | Purchase the correct key for L1250 (not L120 or L130). |
4. Procedure B: Network Factory Reset
Use this method if the printer will not connect to Wi-Fi or the network settings are corrupted.
- Ensure the printer is turned on.
- Press and hold the Network Status Button (usually indicated by a network icon) for approximately 5 to 7 seconds.
- Release the button when the network light begins to flash.
- Press the Network Status Button again briefly to confirm the reset.
- The network settings will be restored to factory defaults. You will need to reconnect the printer to your Wi-Fi network via the Epson Smart Panel app.