How To Reset Samsung Ml-2165 Printer !exclusive!

How to Reset a Samsung ML-2165 Printer: The Ultimate Troubleshooting Guide

The Samsung ML-2165 is a legendary monochrome laser printer known for its compact design, reliable performance, and sharp text quality. However, like all printers, it can eventually run into issues that require a "reset." Whether you are seeing a persistent "Replace Toner" message, a "Paper Jam" error when there is no jam, or the printer has simply stopped responding, a reset is often the most effective solution.

But what does "reset" actually mean for this model? It can mean several things: resetting the toner counter, performing a factory reset (clearing NVRAM), or a hard power reset. This guide covers every possible method to reset your Samsung ML-2165 printer, from simple button sequences to using proprietary software.

Step-by-Step Instructions:

  1. Turn on the printer and open the front cover (the toner access door).
  2. Remove the toner cartridge by pulling it out gently.
  3. Look for the chip – it is a small, shiny green or gold circuit board on the side of the cartridge.
  4. Cover the chip – Use a small piece of non-conductive tape (e.g., Scotch tape, electrical tape, or a small sticker). Note: Some users place tape directly on the chip; others place a small piece of paper between the printer’s contact pin and the chip. The goal is to interrupt the connection.
  5. Reinsert the toner cartridge firmly into the printer.
  6. Close the front cover.
  7. Press and hold the "Cancel" button (the round button with a red circle or a "C" symbol) for 10–15 seconds. The green light should blink and then become solid.
  8. Open the front cover again, remove the cartridge, and remove the tape from the chip.
  9. Reinsert the cartridge and close the cover.

Result: The printer should now recognize the toner as "full" again. This method effectively resets the page counter without any special tools. how to reset samsung ml-2165 printer

8. Conclusion

Resetting the Samsung ML-2165 printer can resolve communication errors, false toner warnings, and unresponsive states. The most effective general reset is the NVRAM factory reset (Section 3.3). For persistent "Replace Toner" errors, the chip must be replaced via a new cartridge or a dedicated chip resetter. Mechanical or fuser-related issues require service intervention.

2. Replace the Toner Cartridge Chip

If the toner reset doesn’t work, the cartridge chip may be physically damaged. Buy a compatible replacement chip (available online) and swap it on the toner cartridge. This acts as a hardware reset. How to Reset a Samsung ML-2165 Printer: The

3.3 NVRAM Factory Reset (Most Comprehensive)

Resets non-volatile memory to factory defaults: page counters, toner level monitoring algorithm, paper size, and power save settings.

Procedure:

  1. Turn off the printer.
  2. Press and hold the Power button + Cancel button simultaneously.
  3. While holding both, turn on the printer.
  4. Wait for all LEDs to blink three times (approx. 10 seconds), then release both buttons.
  5. Printer will perform a full initialization cycle (30–45 seconds).

Confirmation: Print a configuration page by pressing and holding the Cancel button for 4 seconds (when ready). Check that settings are default.