How To Unlock Bootloader In Redmi: Note 10 Pro M...

The sun had just set over the edge of my desk, casting long shadows across the keyboard. My Redmi Note 10 Pro (codenamed Sweet) sat there, innocent-looking, running MIUI just as Xiaomi intended. But I was bored. Bored of the ads in the file manager. Bored of the default launcher. I wanted freedom.

So began my quest. The quest to unlock the Bootloader.

Step 1: The Application (The Wait)

The first thing I learned was patience. Unlike a OnePlus or a Pixel, Xiaomi doesn’t just hand you the keys.

I picked up my phone and navigated to Settings > About Phone > MIUI Version. I tapped it seven times until the toast message appeared: “You are now a developer.”

Back in Additional Settings > Developer Options, I found the holy grail: Mi Unlock Status. But first, I had to bind my account. I tapped “Add account and device”, but it warned me: Wait 168 hours.

Seven days. A full week of staring at my phone, unable to do anything but wait for the servers to approve me.

Step 2: The Tools

Seven days later, I opened my Windows laptop. I downloaded the Mi Unlock Tool from the official Xiaomi community page. I also made a critical decision: download USB drivers. Without them, the PC wouldn't recognize my phone.

I powered down the Sweet. Holding the Volume Down + Power button simultaneously, I felt the buzz. The screen lit up with a hare fixing a robot—Fastboot mode.

Step 3: The First Attempts (The Fear)

I plugged the phone into the USB 2.0 port (USB 3.0 often fails here). I opened the Mi Unlock Tool, signed in with my Xiaomi account, and... “Couldn’t unlock. Account is not bound to this device.”

Panic. I had waited 168 hours. Why?

I realized my mistake. I had bound my account in developer settings before the wait, but I didn’t have "OEM Unlocking" toggled on. I rebooted to system, toggled it, and re-bound the device. Another 7 days? No. This time, only 24 hours.

Step 4: The Click

Finally, Friday night. 11:59 PM. I ran the tool again. This time, the progress bar moved. 10%... 50%... 90%...

“Unlocked successfully.”

I didn't cheer. I just breathed.

The phone rebooted. But this was the scary part: a reboot after unlocking wipes everything. All my photos, chats, saved games—gone. It was a digital factory reset, a clean slate.

Step 5: The Aftermath

I watched the phone boot up. The setup screen looked the same, but deep in the hardware, a single flag had flipped from 0 to 1. Secure boot was off.

Now, I could flash TWRP. I could install LineageOS. I could root with Magisk.

But as I looked at the blank home screen, I realized something: unlocking the bootloader wasn't just about custom ROMs. It was about ownership. It was turning my Redmi Note 10 Pro from Xiaomi’s phone into my phone.

Warning for the reader: Unlocking breaks Widevine L1 (Netflix downgrades to SD quality). It trips the SafetyNet. And your bank apps might cry. But for those who want absolute control? The 168-hour wait is just the price of admission.

Unlocking the bootloader on your Redmi Note 10 Pro Max Go to product viewer dialog for this item.

(codename: "sweetin") is a multi-step process that requires a Windows PC, a Mi Account, and a mandatory waiting period. This procedure is official but will completely wipe all data on your device and may void your warranty. Pre-Unlock Checklist

Before starting, ensure you have met the following requirements: Backup Data: All photos, apps, and files will be erased.

Mi Account: Log in to a Mi Account on your phone. Ideally, this account should be at least 30 days old.

Active SIM Card: You must use mobile data (not Wi-Fi) to link your account to the device. How to unlock Bootloader in REDMI Note 10 Pro M...

PC Tools: Download the official Mi Unlock Tool and install Xiaomi USB Drivers. Phase 1: Preparing the Device

Enable Developer Options: Go to Settings > About Phone and tap MIUI Version (or HyperOS version) 7 times until you see "You are now a developer!".

Toggle Settings: Navigate to Settings > Additional Settings > Developer Options. Enable OEM Unlocking. Enable USB Debugging. Link Mi Account: In Developer Options, tap Mi Unlock Status. Turn off Wi-Fi and turn on Mobile Data. Tap Add account and device. Wait for a success message. Phase 2: The Unlocking Process

Boot into Fastboot Mode: Power off your phone. Press and hold the Volume Down + Power Button simultaneously until the Fastboot logo appears.

Connect to PC: Plug your phone into your PC using a high-quality USB cable. Run Mi Unlock Tool:

Open miflash_unlock.exe on your PC and sign in with the same Mi Account used on the phone. The tool should detect your device. Click Unlock.

Note: On your first attempt, you will likely see a message saying "Could not unlock, please unlock after 168 hours" (7 days). Do not log out of your Mi Account or factory reset the phone during this time, or the timer may reset.

Final Unlock: After the waiting period, repeat the Fastboot steps and click Unlock in the tool again. It will now reach 100% and show "Unlocked successfully". Post-Unlock Information

Unlocking the bootloader on a Redmi Note 10 Pro Max requires enabling developer options, binding a Mi Account via mobile data, and using the Mi Unlock Tool on a PC, a process that erases all user data. Recent policies require 30-day account activity and, for HyperOS, a 14-day permission window, often with a 168-hour wait time. For more details, visit Xiaomi Community

How to Unlock the Bootloader on Redmi Note 10 Pro Max (2026 Guide)

Unlocking the bootloader is the first step toward true ownership of your Redmi Note 10 Pro Max, allowing you to install custom ROMs, kernels, and advanced recovery tools like TWRP. However, Xiaomi's security policies have evolved significantly. As of 2026, the process requires specific account permissions and a mandatory waiting period. ⚠️ Essential Prerequisites

Before you start, understand that this process will erase all your data and may void your warranty.

Back Up Everything: Ensure all photos, contacts, and files are saved elsewhere.

Xiaomi Account: Your account must be active for at least 30 days.

SIM Card: A valid SIM with an active mobile data plan must be inserted (Wi-Fi cannot be used for the binding step).

Xiaomi Community App: You must use the Xiaomi Community App (version 5.3.31 or newer) to apply for unlocking permissions if your device is running newer HyperOS versions. Step 1: Apply for Unlocking Permission

Xiaomi now restricts bootloader unlocking to users who "contribute" to the community or meet specific criteria.

Open the Xiaomi Community App and set your region to Global. Go to the "Me" tab > Unlock Bootloader.

Tap Apply for Unlocking. Applications are often limited per day; for the best chance, try at 00:00 Beijing Time.

Once granted, your account is authorized to unlock up to 3 devices per year. Step 2: Bind Your Account to the Device

Unlocking the bootloader on a Redmi Note 10 Pro Max is a multi-step process that requires a Mi Account, a PC, and a mandatory waiting period. Important Prerequisites Backup Your Data : This process will erase all user data on your phone. : Ensure your device has at least 50% to 80% battery to prevent it from shutting down mid-process.

: You need the original USB-C data cable and an Intel-based PC. Connectivity : You must have a SIM card with an active mobile data plan; Wi-Fi must be turned off during the account binding step. Step 1: Prepare Your Device Enable Developer Options Settings > About phone and tap on MIUI Version 7 times until you see "You are now a developer". Enable Unlocking : Navigate to Settings > Additional settings > Developer options . Toggle on OEM unlocking USB debugging Bind Your Mi Account Turn off Wi-Fi and turn on Mobile Data Developer options Mi Unlock status Add account and device . You should see a "Added successfully" message. Step 2: Prepare Your PC Download the Tool : Download the official Mi Unlock Tool and extract the files. Install Drivers

: Run the driver installation tool found within the Mi Unlock folder to ensure your PC recognizes the phone in fastboot mode. : Open the miflash_unlock.exe and sign in with the same Mi Account currently linked to your phone. Step 3: Unlocking the Bootloader

Unlocking the bootloader on your Redmi Note 10 Pro or Pro Max is a multi-step process that requires a PC, a Mi Account, and a mandatory waiting period. Critical Prerequisites Before starting, ensure you have the following:

Backup Your Data: Unlocking will erase all user data on your phone.

Mi Account: You must be signed into a valid Mi Account on the device.

SIM Card: The phone must have a SIM card with active mobile data; Wi-Fi must be turned off during the account binding step.

PC Tools: Download the official Mi Unlock Tool and install Xiaomi USB Drivers on your computer. Step-by-Step Guide 1. Enable Developer Options Go to Settings > About phone. The sun had just set over the edge

Tap on MIUI version seven times until you see the message "You are now a developer!". 2. Bind Your Account Go to Settings > Additional settings > Developer options. Enable OEM unlocking and USB debugging.

Tap Mi Unlock status and select Add account and device. Ensure you are using mobile data, not Wi-Fi. 3. Put the Phone into Fastboot Mode Turn off your device.

Press and hold the Power and Volume Down buttons simultaneously until the "Fastboot" logo (often a bunny) appears. 4. Use the Mi Unlock Tool on your PC

Unlocking the bootloader on the Redmi Note 10 Pro Go to product viewer dialog for this item.

is a multi-day process that requires both the device and a Windows PC. This review outlines the official procedure, updated for 2026 requirements. Pre-Unlocking Checklist

Data Backup: Unlocking wipes all user data including photos, apps, and messages.

Xiaomi Account: You must have a valid Mi account logged into the device.

Hardware: A high-quality USB data cable and a PC running Windows are required.

Network: You must use mobile data (not Wi-Fi) to bind your account to the device. Phase 1: Device Preparation

Enable Developer Options: Go to Settings > About Phone and tap MIUI Version 7 times until you see "You are now a developer!".

Toggle Settings: Navigate to Additional Settings > Developer Options. Enable OEM Unlocking and USB Debugging.

Bind Account: Tap Mi Unlock Status. Turn off Wi-Fi, enable mobile data, and tap "Add account and device".

Note: If you are on HyperOS, you may first need to apply for permissions through the Xiaomi Community App. Phase 2: The PC Unlock Process

Download Tool: Get the official Mi Unlock Tool from the Xiaomi Unlock page and extract it on your PC. Fastboot Mode : Power off your Redmi Note 10 Pro

. Press and hold Power + Volume Down until the "Fastboot" logo appears.

Connect & Login: Connect the phone to your PC via USB. Open miflash_unlock.exe on your PC and sign in with the same Mi account used on the phone.

Initial Attempt: Click "Unlock anyway". On the first try, the tool will almost always show a message: "Couldn't unlock. Please unlock 168 hours later". Phase 3: The Waiting Period Duration: Usually 168 hours (7 days).

Rules: You can use the phone normally during this time, but do not sign out of the Mi account or factory reset the device, as this will reset the timer.

Final Step: After the timer expires, repeat Phase 2. The tool will reach 100%, and the phone will reboot with an "unlocked" padlock icon at the top of the boot screen. Critical Risks & Considerations Consequence Warranty

Unlocking technically voids the official warranty in many regions. Security

The device becomes more vulnerable to unauthorized access if lost. App Support

Some banking apps or streaming services (Netflix HD) may stop working due to failed integrity checks. OTA Updates

While you still receive official updates, they may fail to install automatically if the system partition is modified.

Unlocking the Bootloader on REDMI Note 10 Pro: A Step-by-Step Guide

Are you ready to take control of your REDMI Note 10 Pro and explore the world of customizations? Unlocking the bootloader is the first step towards achieving this goal. In this guide, we'll walk you through the process of unlocking the bootloader on your REDMI Note 10 Pro.

Disclaimer: Before we begin, please note that unlocking the bootloader will void your warranty and may potentially brick your device. Proceed with caution and at your own risk.

Required Tools and Prerequisites:

  1. A REDMI Note 10 Pro with a compatible firmware version ( MIUI 12 or later)
  2. A computer with Windows 10 (or later) installed
  3. A USB cable
  4. MiFlashUnlock tool (download from the official Xiaomi website)
  5. Xiaomi USB driver (download from the official Xiaomi website)
  6. A Mi account (create one if you don't have one already)

Step 1: Enable Developer Options and OEM Unlocking A REDMI Note 10 Pro with a compatible

  1. Go to Settings > About phone > Build number and tap on it 7 times to enable Developer options.
  2. Go back to Settings > Developer options and toggle on OEM unlocking.

Step 2: Create a Mi Account and Apply for Bootloader Unlock

  1. Create a Mi account on the Xiaomi website if you haven't already.
  2. Go to the Mi Unlock website and apply for bootloader unlock. You will receive a confirmation email with a link to unlock your device.
  3. Click on the link and follow the instructions to complete the bootloader unlock request.

Step 3: Download and Install MiFlashUnlock Tool

  1. Download the MiFlashUnlock tool from the official Xiaomi website.
  2. Extract the tool to a folder on your computer (e.g., C:\MiFlashUnlock).

Step 4: Connect Your Device to the Computer

  1. Connect your REDMI Note 10 Pro to the computer using a USB cable.
  2. Open Device Manager on your computer and ensure that your device is recognized.

Step 5: Boot into Fastboot Mode

  1. Power off your REDMI Note 10 Pro.
  2. Press and hold the Volume Down and Power buttons simultaneously to boot into fastboot mode.

Step 6: Unlock the Bootloader

  1. Open the MiFlashUnlock tool and select your device model.
  2. Click on Unlock and follow the on-screen instructions to complete the bootloader unlock process.

Step 7: Verify Bootloader Status

  1. Reboot your device and go to Settings > Developer options.
  2. Verify that the OEM unlocking option is still enabled and the bootloader status is Unlocked.

Congratulations! You have successfully unlocked the bootloader on your REDMI Note 10 Pro. You can now proceed to install custom ROMs, kernels, and other mods to customize your device.

Remember to always exercise caution when modifying your device, and make sure to backup your data regularly.

Unlocking the Bootloader on REDMI Note 10 Pro (Max)

Warning: Unlocking the bootloader will erase all data on your device. Make sure to back up your important data before proceeding.

Required Tools and Files:

  • Xiaomi USB Driver
  • Minimal ADB and Fastboot Tool
  • Bootloader Unlock Tool
  • REDMI Note 10 Pro (Max) with at least 50% battery

Step-by-Step Guide:

1. Enable Developer Options and OEM Unlock

  • Go to Settings > About phone > Build number and tap on it 7-8 times to enable Developer options.
  • Go back to Settings > Developer options and toggle on OEM Unlock.

2. Install Xiaomi USB Driver and Minimal ADB and Fastboot Tool

  • Download and install the Xiaomi USB Driver from the official Xiaomi website or from a trusted source.
  • Download and extract the Minimal ADB and Fastboot Tool to a folder on your computer (e.g., C:\ADB).

3. Boot into Fastboot Mode

  • Power off your REDMI Note 10 Pro (Max).
  • Press and hold the Volume down and Power buttons simultaneously until the device boots into Fastboot mode.

4. Connect Device to Computer and Verify Fastboot Connection

  • Connect your REDMI Note 10 Pro (Max) to your computer using a USB cable.
  • Open a Command Prompt or PowerShell window in the ADB folder (e.g., C:\ADB).
  • Type fastboot devices to verify that your device is detected. You should see a serial number.

5. Unlock Bootloader using Bootloader Unlock Tool

  • Download the Bootloader Unlock Tool from the official Xiaomi website or from a trusted source.
  • Extract the tool to a folder on your computer (e.g., C:\Bootloader Unlock Tool).
  • Open a Command Prompt or PowerShell window in the Bootloader Unlock Tool folder.
  • Type bootloader unlock and follow the on-screen instructions to unlock the bootloader.

6. Confirm Bootloader Unlock

  • Type fastboot oem unlock and press Enter.
  • Read the warning message carefully and confirm that you want to unlock the bootloader.
  • Wait for the process to complete. Your device will reboot automatically.

7. Format Data and Cache

  • After unlocking the bootloader, your device will boot into the system. Go to Settings > Wipe data and select Format data and Format cache.

8. Reboot to System

  • Reboot your device to the system by selecting Reboot > Reboot to system.

Your REDMI Note 10 Pro (Max) now has an unlocked bootloader.

Post-Unlock Procedures:

  • You may need to re-enable Developer options and OEM Unlock after unlocking the bootloader.
  • You can now root your device, install custom recoveries, and customize your device to your liking.

Disclaimer: Unlocking the bootloader may void your device's warranty. Proceed at your own risk.

Review Summary: Unlocking the bootloader on the Redmi Note 10 Pro is a necessary step for anyone looking to install custom ROMs (like Pixel Experience or LineageOS), root their device, or install custom recoveries. However, it is not a simple "one-click" process. Xiaomi imposes a mandatory waiting period, and the process involves wiping your device completely.

The Prerequisites (Read Carefully)

Before touching any software, ensure you have:

  1. A Windows PC/Laptop (Mac/Linux works, but commands differ; this guide uses Windows).
  2. Original USB Cable (high quality, data-transfer capable).
  3. Backup your data – unlocking wipes everything (photos, contacts, apps, internal storage).
  4. Minimum 50% battery (100% recommended).
  5. Working internet on both phone and PC.
  6. Patience – Xiaomi forces a mandatory waiting period (72 hours to 15 days).

Step 2: The 168-Hour Prison

For the REDMI Note 10 Pro (Global/India variants), Xiaomi enforces a hard time-gate.

  • Bind your device inside the Mi Unlock Status menu.
  • A timer will appear: "Wait 168 hours to unlock."
  • Do not log out of your Mi Account on the phone. Do not flash the phone via Mi Flash tool during this week. Just use the phone normally for 7 days.

Pro tip: Mark the exact hour on a calendar. Trying before the timer expires resets the clock.

The Process: A Step-by-Step Review

Here is the breakdown of the required steps, along with the "gotchas" that many guides miss.

Important Final Notes

  • Do NOT relock the bootloader with custom software installed – that hard bricks your device.
  • Widevine L1 (HD Netflix) : Unlocking usually downgrades Widevine to L3 (no HD) on MIUI. Some custom ROMs restore L1, but not guaranteed.
  • SafetyNet / Play Integrity : After unlocking, banking apps and Google Pay may fail. Use Magisk + Shamiko + Universal SafetyNet Fix.
  • Return to stock : You can relock only after flashing official fastboot ROM via Mi Flash Tool (clean all and lock).

Step 6: Successful Unlock

  • The tool will show "Unlocked successfully" .
  • The phone will automatically reboot and factory reset.
  • You will see an Unlocked bootloader warning screen when the phone boots (press power button to continue).