Hp Psc 1350 Allinone Printer Driver For Windows 10 Upd __full__ Review

While HP no longer provides a dedicated "Full Feature" software package for the HP PSC 1350 All-in-One

on Windows 10, you can still use the printer by utilizing drivers built into the Windows operating system. How to Install the Driver on Windows 10

The most reliable way to get this legacy printer working is through the Windows Update Add a Printer

wizard, as the baseline drivers are often bundled within Windows. Use Windows Update

: Connect your printer via USB. Windows should automatically attempt to find and install a basic driver. Manual Installation via Device Manager Device Manager

, find your printer under "Print queues" or "Other devices," right-click it, and select Update driver Search automatically for updated driver software Add Printer Wizard Control Panel > Devices and Printers Add a printer

If your printer isn't listed, select "The printer that I want isn't listed" and then "Add a local printer or network printer with manual settings." Choose the USB virtual printer port Windows Update to refresh the list of available HP drivers. Microsoft Learn Scanning on Windows 10 Because the original HP Solution Center HP Director

software (which handled scanning) is not compatible with Windows 10, you will need alternative software to scan: HP Support Community Windows Scan App

: A free app available from the Microsoft Store that works with many legacy HP devices.

: A third-party software that provides dedicated scanner drivers for the HP PSC 1350 , updated as recently as March 2026 Official Resources

To set up your HP PSC 1350 All-in-One printer on a modern Windows 10 system, you must navigate a few technical hurdles since HP no longer provides a dedicated "Full Feature" installer for this legacy model. Windows 10 Compatibility Overview

While the HP PSC 1350 series (including the 1340 and 1350 Plus) reached its official end-of-support life, it can still function on Windows 10 using Windows Built-in Drivers. Windows 10 officially reached its own end of support on October 14, 2025, meaning HP no longer tests these legacy devices for further updates. How to Install the HP PSC 1350 Driver on Windows 10

Because a standard download package may not be available on the HP Software and Driver Downloads page, you should use the following manual methods: USB Automatic Detection:

Power on your printer and connect it to your PC via a USB cable.

Windows 10 should automatically detect the hardware and attempt to install the best available driver through its Add Hardware feature. Manual "Add a Printer" Method:

If automatic detection fails, go to Settings > Devices > Printers & Scanners and click Add a printer or scanner. Select "The printer that I want isn't listed".

Choose "Add a local printer or network printer with manual settings".

Select the USB port (e.g., USB001) and click Windows Update to refresh the driver list.

Look for "HP" and select a compatible legacy driver like the HP Deskjet 990c or 6980 if the exact PSC 1350 model is not listed. Third-Party Scanner Support:

If the print function works but the scanner does not, specialized software like VueScan can often provide compatible scanner drivers for legacy HP hardware on Windows 10. Troubleshooting Common Issues

HP PSC 1350 All-in-One Printer Software and Driver Downloads hp psc 1350 allinone printer driver for windows 10 upd

Here’s a properly structured, user-friendly content piece for your query. You can use this on a blog, driver download site, support forum, or knowledge base.

Part 7: The Future – Should You Keep Your HP PSC 1350?

The HP PSC 1350 is nearly 20 years old. Printheads dry out, ink cartridges (HP 56 and 57) are becoming expensive, and scanning resolutions (600 dpi) are dated. However, it has one massive advantage: No DRM, no subscription, no forced firmware updates.

If you only need black-and-white text documents and occasional color copies, keep it. The driver methods above will work for the foreseeable future because Microsoft maintains backward compatibility.

If you need reliable scanning on Windows 10 without third-party tools, consider upgrading to a newer HP Envy or Canon PIXMA. But if you love your old warhorse, follow this guide.

The Complete Guide to the HP PSC 1350 All-in-One Printer Driver for Windows 10 (Updated 2026)

Struggling to make your legacy HP PSC 1350 work on Windows 10? You are not alone.

The HP PSC 1350 All-in-One Printer is a classic workhorse from the early 2000s. Known for its reliability as a printer, scanner, and copier, this device was built to last. However, HP officially ended driver support for this model years ago. When Microsoft released Windows 10 (and continues to update it in 2026), thousands of users found themselves staring at an unresponsive machine, error messages, or the dreaded "Driver Unavailable" notification.

If you have searched for the "hp psc 1350 allinone printer driver for windows 10 upd" , you’ve likely hit a wall of outdated forums and broken links. This guide will provide the most current, step-by-step solutions to get your HP PSC 1350 not only printing but also scanning on a modern Windows 10 PC.

Scanner not detected in Windows Scan app

Fix: In the Windows Scan app, click Settings (gear icon) → Change scanner manually. Sometimes the PSC 1350 lists itself as “WIA HP PSC 1300 series.” Select that.

Conclusion: Your HP PSC 1350 Can Still Thrive on Windows 10

The search for “hp psc 1350 allinone printer driver for windows 10 upd” ends here. You do not need a hacked driver from a sketchy website. You do not need to downgrade to Windows 7. You simply need to use either the HP Universal Print Driver (PCL 5) or the native Windows 10 HP Deskjet 990c driver.

Quick summary:

With this guide, your HP PSC 1350 All-in-One will print, scan, and copy on Windows 10 just like it did in 2004. Enjoy your classic hardware—and the money you saved by not buying a new printer.

Have questions or unique errors? Leave a comment below (on the original blog post). For urgent driver issues, run the HP Print and Scan Doctor – it auto-detects legacy PSC models and offers the Deskjet 990c fallback.

Last updated: March 2026
Tested on: Windows 10 Pro 22H2 (64-bit) and Windows 11 23H2.

The HP PSC 1350 All-in-One is a legacy device, meaning HP no longer provides a dedicated, full-feature driver installer specifically for Windows 10 on their main download pages. However, you can still get it running by using the Windows Built-in Driver or the Windows Update catalog, which provides basic printing and scanning functionality. 🛠️ Recommended Installation Methods 1. Windows Built-in Driver (Easiest)

Windows 10 includes a "class driver" for older HP PSC models. Connect your printer to the PC via USB. Open Settings > Devices > Printers & Scanners. Click Add a printer or scanner. Wait for Windows to search. If your printer appears, select it and click Add device.

If it doesn't appear: Click "The printer that I want isn't listed".

Select Add a local printer or network printer with manual settings and click Next.

Choose the USB001 (Virtual printer port for USB) and click Next. Click Windows Update to refresh the list of drivers.

Select HP as the manufacturer and find HP PSC 1350 in the list. 2. HP Support Assistant / HP Smart App

For more modern management, though support is limited for this model: Download the HP Smart App from the Microsoft Store. While HP no longer provides a dedicated "Full

Use HP Easy Start to let HP's automated tool scan for any compatible generic drivers. 🔍 Driver Availability Report Support Status Source/Method Print ✅ Fully Supported Windows Built-in Driver or Windows Update Scan ⚠️ Limited Use Windows Fax and Scan or VueScan Copy ✅ Fully Supported Standalone function (no driver needed for local copies) Official HP Software ❌ Discontinued HP Image Zone/Solution Center is not Win 10 compatible 💡 Troubleshooting Scanning Issues

Because the original HP Solution Center software often fails on Windows 10, scanning can be tricky. HP PSC 1350 won't work with Windows 10

The Struggle is Real

I had been using my trusty HP PSC 1350 All-in-One printer for years, but when I upgraded to Windows 10, I realized that the printer driver was no longer compatible. I tried to print a document, but the printer wouldn't respond. I checked the Device Manager, and sure enough, the printer was listed with a yellow exclamation mark, indicating a driver issue.

The Search Begins

I started searching online for a solution, but every link I clicked on seemed to lead to a dead end. I tried downloading drivers from the HP website, but they were either for older versions of Windows or were not compatible with my printer model. I was on the verge of giving up, but then I stumbled upon a forum post from a fellow user who had successfully updated their HP PSC 1350 driver for Windows 10.

The Solution

The user recommended visiting the HP Support website and using their printer driver update tool. I gave it a try, and here's how I updated my driver:

  1. Go to the HP Support website: I navigated to the HP Support website (www.support.hp.com) and clicked on "Software & Drivers."
  2. Enter my printer model: I entered my printer model, "HP PSC 1350," and clicked on "Find."
  3. Select my operating system: I selected "Windows 10" as my operating system and clicked on "Next."
  4. Download the driver: The website detected that my printer driver needed an update and offered a compatible driver for download. I clicked on "Download" to save the driver to my computer.
  5. Run the installer: I ran the installer and followed the on-screen instructions to update the driver.

The Update is Successful

After completing the update, I restarted my computer and connected my printer. To my delight, the printer was now recognized by Windows 10, and I was able to print, scan, and copy with ease.

Tips and Variations

If you encounter any issues during the update process, here are some additional tips:

HP PSC 1350 All-in-One printer , Windows 10 does not have a dedicated, modern "Full Feature" driver package available for download from the official HP website . Instead, you must rely on the Windows Built-in Driver Windows Update catalog to enable printing and basic scanning HP Support Community Recommended Installation Steps

Since a standalone installer (.exe) for Windows 10 is rarely available, use these steps to force Windows to recognize the device: HP PSC 1350 won't work with Windows 10

To install or update the HP PSC 1350 All-in-One printer Go to product viewer dialog for this item.

on Windows 10, you generally do not need a separate driver download because this legacy printer is supported through Windows built-in drivers or the HP Smart app. How to Install the HP PSC 1350 Driver on Windows 10 Since dedicated full-feature software for the

was discontinued after Windows XP, follow these steps to use the built-in Windows 10 support: Use Windows Update: Connect your printer to your computer via USB.

Go to Settings > Update & Security > Windows Update and click Check for updates. Windows will often automatically identify and install the basic driver. Manual Installation via Device Manager:

Search for Device Manager in your Windows search bar and open it. Find your printer under "Other devices" or "Printers". Right-click the printer and select Update driver.

Choose Search automatically for drivers. Windows will search online for the most compatible update. HP Support Official Downloads: Visit the HP PSC 1350 Official Support Page Part 7: The Future – Should You Keep Your HP PSC 1350

to check for any specific firmware updates or basic driver packages available for your exact sub-model (such as the or

If Windows 10 is not explicitly listed, you can sometimes use drivers for Windows 7 or 8 in Compatibility Mode. Troubleshooting & Scanner Support

Scanning Issues: Because the legacy "HP Solution Center" no longer works on Windows 10, you should use the Windows Scan app (available in the Microsoft Store) for basic scanning. For advanced scanning, third-party software like VueScan offers reverse-engineered drivers specifically for the

Connection Errors: If the printer is not detected, try a different USB port or replace the USB cable.

HP Easy Start: You can also try downloading HP Easy Start, which is designed to find the best available driver for older printers automatically.

HP PSC 1350 All-in-One Printer Driver for Windows 10

If you're looking for a driver for your HP PSC 1350 All-in-One printer to work with Windows 10, here's what you need to know:

Driver Information

The HP PSC 1350 All-in-One printer is an older model, but it can still be used with Windows 10. However, the driver may not be readily available from HP's official website, as the company typically only provides drivers for newer models.

Workaround

To install the driver for your HP PSC 1350 All-in-One printer on Windows 10, you can try the following:

  1. Windows Update Catalog: You can search for the driver on the Windows Update Catalog website. This website provides a comprehensive list of drivers for various devices, including printers.
  2. HP's Official Website: Although HP may not have an official driver for Windows 10, you can try visiting their website and searching for the printer model. You may find a driver for an older version of Windows that can still work with Windows 10.
  3. Microsoft's Update Center: You can also try searching for drivers on Microsoft's Update Center website.

Alternative Solution

If you're unable to find a compatible driver, you can try using the Microsoft XPS Document Writer or Microsoft Print to PDF feature, which allows you to print documents to a virtual printer. This won't provide the full functionality of your printer, but it will allow you to print basic documents.

Steps to install the driver

If you manage to find a compatible driver, here are the general steps to install it:

  1. Download the driver from the website.
  2. Run the downloaded file and follow the on-screen instructions to install the driver.
  3. Connect your printer to your computer using a USB cable.
  4. Restart your computer and printer.

Troubleshooting

If you encounter any issues during driver installation or printing, try the following:

Summary

The HP PSC 1350 is a robust older machine, but it requires workarounds for Windows 10. Using the HP Universal Print Driver (UPD) is the most professional method, but letting Windows Update find the legacy "1300 series" driver is often the path of least resistance.

The HP PSC 1350 All-in-One Go to product viewer dialog for this item.

is a legacy device. While HP no longer provides a dedicated "Full Feature Software" installer specifically for Windows 10, you can still use the printer by relying on the Windows Built-in Driver or the Windows Update catalog. Method 1: Windows Built-in Driver (Recommended)

Windows 10 includes basic drivers for many legacy HP printers. This is the most reliable way to get the device working without external software. HP PSC 1350 won't work with Windows 10