Hpe Smart Array S100i Sr Gen10 Driver Windows Server 2022 -

The HPE Smart Array S100i SR Gen10 is an entry-level, software-based SATA RAID solution designed for HPE ProLiant Gen10 servers. For Windows Server 2022, HPE provides a dedicated Smart Array S100i SR Gen10 SW RAID Driver that must be manually loaded during OS installation if not using Intelligent Provisioning. Key Specifications & Support Supported OS: Windows Server 2016, 2019, and 2022.

RAID Levels: Supports RAID 0, 1, 5, and 10 for up to 14 SATA drives.

Boot Mode: Requires UEFI Boot Mode; it does not support Legacy BIOS.

Driver Version: The latest validated driver for Windows Server 2022 is often 1010.14.0.0(C) or newer. OS Installation Guide

Because the S100i is a software RAID controller, its driver is not included in standard Windows Server 2022 installation media. To install the OS, use one of the following methods: Assisted Installation (Recommended): Use HPE Intelligent Provisioning (F10 during boot).

This tool automatically injects the necessary storage drivers, ensuring the Windows installer recognizes your logical drive. Manual Driver Injection:

Download the S100i SR Gen10 SW RAID Driver for Windows Server 2022 from the HPE Support Center. Extract the .exe contents to a USB drive.

During the "Where do you want to install Windows?" step, click Load Driver and browse to the folder on your USB drive.

Once loaded, your RAID array should appear as a valid installation target. Management Tools

To monitor and configure your arrays within Windows, you should install the HPE Smart Storage Administrator (SSA). This utility allows you to perform online capacity expansion and check drive health directly from the desktop.

To install Windows Server 2022 on an HPE ProLiant Gen10 server using the Smart Array S100i SR Gen10 controller, you must manually provide the driver during installation because it is not included in the standard Microsoft media. 1. Download and Prepare the Driver

The S100i is a software-based RAID controller that requires specific drivers to "see" your logical drives during Windows setup. hpe smart array s100i sr gen10 driver windows server 2022

Download: Obtain the latest HPE Smart Array S100i SR Gen10 SW RAID Driver (e.g., version 1010.14.0.0 or later).

Extract: Run the .exe on a separate PC and choose the Extract option.

Transfer: Copy the extracted files (including the .inf, .sys, and .cat files) onto a USB flash drive. 2. Configure RAID in UEFI

Before starting the OS installation, you must enable the controller and create an array.

Enable Controller: Press F9 during POST to enter System Utilities. Navigate to System Configuration > BIOS/Platform Configuration > Storage Options > SATA Controller Options > Embedded SATA Configuration and set it to Smart Array SW RAID Support.

Create Array: Press F10 for Intelligent Provisioning or use the UEFI menu under Embedded Storage to create your RAID 0, 1, 5, or 10 volume. 3. Install Windows Server 2022 Boot from your Windows Server 2022 installation media.

Proceed through the setup until the "Where do you want to install Windows?" screen appears. If no drives are listed, this is normal. Click Load Driver and insert your USB flash drive.

Click Browse and navigate to the folder on your USB where you extracted the driver files.

Select the identified driver and click Next. Your RAID volume should now appear in the list. Select the volume and continue the installation. Alternative: Assisted Installation

You can skip manual driver injection by using Intelligent Provisioning. Press F10 during boot and select Express OS Install. This method automatically injects all required HPE drivers, including the S100i storage driver, during the setup process.

Common Issues and Troubleshooting

Even with the correct driver, issues arise. Here are the top fixes for the hpe smart array s100i sr gen10 driver windows server 2022 environment. The HPE Smart Array S100i SR Gen10 is

5.1 HPE Smart Storage Administrator (SSA)

📦 HPE Service Pack for ProLiant (SPP)

Always keep your SPP updated. The latest SPP includes the S100i driver for Windows Server 2022 and simplifies maintenance.

Method 3: Using HPE Image Assistant (Smart Update Manager)

For automated driver deployment across multiple servers:

  1. Install HPE Image Assistant (formerly SUM) on Windows Server 2022.

  2. Run the tool and baseline against your server.

  3. Select the S100i driver component from the repository.

  4. Apply the update and reboot.

3. Prerequisites

Before initiating the driver installation, ensure the following requirements are met:

1. Driver Not Signed / Installation Blocked

Problem: Windows Server 2022 blocks the driver because it’s not digitally signed or requires Secure Boot to be disabled.

Solution:

Final Verdict

Will it work? Yes. Is it stable? Mostly. Should you trust it for a domain controller or SQL server? Absolutely not.

For a home lab, file server, or development environment, the S100i + Windows Server 2022 combo is a great way to save money. Just maintain good backups and consider this a bridge solution until HPE (hopefully) releases a signed 2022 driver. Installation: Install HPE SSA for Windows

TL;DR: Download the Windows Server 2019 driver. Use the "Load Driver" trick during setup. It works.

Have a different experience or found a newer driver? Let me know in the comments below!

HPE Smart Array S100i SR Gen10 SW RAID Driver for Windows Server 2022

is available as a dedicated software package from the HPE Support Center. HPE Support Center Official Driver Details 1010.14.0.0 (C). Release Date: September 28, 2022. Operating System Support:

This specific version is designated for Windows Server 2022. Direct Download: You can find the latest version on the official HPE Support Software Details page Installation Instructions

If you are installing Windows Server 2022 for the first time and the installer does not see your drives, follow these steps: Extract the Driver : Download the

from HPE and run it on a separate PC to extract the contents to a USB drive. Load During Setup Boot into the Windows Server 2022 installation media.

At the "Where do you want to install Windows?" screen, click Load Driver

Browse to the folder on your USB drive containing the extracted S100i drivers. Confirm RAID Status : Ensure the S100i controller is enabled in the UEFI System Configuration

(F9 during boot) and that your RAID array is already created before starting the OS installation. Hewlett Packard Enterprise Community Important Notes Software RAID

: The S100i is a software-based RAID solution, meaning it relies on the Windows driver and system CPU to manage data redundancy. Compatibility

: While older versions (like 106.12.6.0 for Server 2019) may sometimes load, HPE strongly recommends using version 1010.14.0.0 or later specifically for Server 2022 to ensure stability. Microsoft Learn Are you performing a clean install

an existing server? I can provide specific steps for injecting the driver into an ISO if you are doing a mass deployment.