Hpe Smart Array S100i Sr Gen10 Sw Raid Driver For Windows Server 2022 Guide

The HPE Smart Array S100i SR Gen10 SW RAID Driver for Windows Server 2022 is available as version 1010.14.0.0(C) (or newer), which you can download directly from the Hewlett Packard Enterprise Support Center.

For detailed technical guidance, the best documentation is the HPE Smart Array SR Gen10 Controller User Guide. This document covers critical procedures such as enabling software RAID in the UEFI System Utilities and manually injecting drivers during a Windows installation. Key Technical Resources

Official Driver Download: The HPE Support Portal provides the verified package for Windows Server 2022. The HPE Smart Array S100i SR Gen10 SW

Comprehensive User Guide: The HPE Smart Array SR Gen10 User Guide explains the differences between S-class (software), E-class, and P-class controllers, along with configuration steps.

QuickSpecs Reference: For hardware limits and supported RAID levels (0, 1, 5, 10), refer to the HPE S100i QuickSpecs. Boot into Windows Server 2022

Configuration Advisory: Critical updates regarding data consistency for specific RAID levels can be found in this HPE Support Advisory. Installation Highlights Enabling Smart Array software RAID - HPE Support

Method 3: Post-Installation Driver Update (If OS already on a different drive)

If Windows Server 2022 is already installed on a non-RAID drive (e.g., a separately attached boot SSD) and you need the S100i for data drives: Method 1: Installing Windows Server 2022 with S100i

  1. Boot into Windows Server 2022.
  2. Open Device Manager → Storage Controllers.
  3. Right-click the unknown or generic SATA controller → Update driver.
  4. Point to the extracted HPE driver folder.
  5. Reboot.

Method 1: Installing Windows Server 2022 with S100i Driver

If your boot drive is connected to the S100i controller, Windows Setup will not see the drive without the driver.

Issue 1: "No drives found" during Windows installation even after loading driver

Cause: Incorrect driver architecture or corrupted USB media.
Solution:

What is the HPE Smart Array S100i SR Gen10?

Before discussing the driver, it is essential to understand what the S100i actually is—and what it is not.

The HPE Smart Array S100i is a Software RAID controller embedded into HPE ProLiant Gen10 and Gen10 Plus server motherboards (e.g., DL360, DL380, ML350, DL20, DL180). Unlike its hardware counterparts (like the P408i or E208i), the S100i lacks a dedicated RAID processor (I/O processor) or onboard cache. Instead, it leverages the system’s main CPU and memory to perform RAID calculations.

The HPE Smart Array S100i SR Gen10 SW RAID Driver for Windows Server 2022 is available as version 1010.14.0.0(C) (or newer), which you can download directly from the Hewlett Packard Enterprise Support Center.

For detailed technical guidance, the best documentation is the HPE Smart Array SR Gen10 Controller User Guide. This document covers critical procedures such as enabling software RAID in the UEFI System Utilities and manually injecting drivers during a Windows installation. Key Technical Resources

Official Driver Download: The HPE Support Portal provides the verified package for Windows Server 2022.

Comprehensive User Guide: The HPE Smart Array SR Gen10 User Guide explains the differences between S-class (software), E-class, and P-class controllers, along with configuration steps.

QuickSpecs Reference: For hardware limits and supported RAID levels (0, 1, 5, 10), refer to the HPE S100i QuickSpecs.

Configuration Advisory: Critical updates regarding data consistency for specific RAID levels can be found in this HPE Support Advisory. Installation Highlights Enabling Smart Array software RAID - HPE Support

Method 3: Post-Installation Driver Update (If OS already on a different drive)

If Windows Server 2022 is already installed on a non-RAID drive (e.g., a separately attached boot SSD) and you need the S100i for data drives:

  1. Boot into Windows Server 2022.
  2. Open Device Manager → Storage Controllers.
  3. Right-click the unknown or generic SATA controller → Update driver.
  4. Point to the extracted HPE driver folder.
  5. Reboot.

Method 1: Installing Windows Server 2022 with S100i Driver

If your boot drive is connected to the S100i controller, Windows Setup will not see the drive without the driver.

Issue 1: "No drives found" during Windows installation even after loading driver

Cause: Incorrect driver architecture or corrupted USB media.
Solution:

What is the HPE Smart Array S100i SR Gen10?

Before discussing the driver, it is essential to understand what the S100i actually is—and what it is not.

The HPE Smart Array S100i is a Software RAID controller embedded into HPE ProLiant Gen10 and Gen10 Plus server motherboards (e.g., DL360, DL380, ML350, DL20, DL180). Unlike its hardware counterparts (like the P408i or E208i), the S100i lacks a dedicated RAID processor (I/O processor) or onboard cache. Instead, it leverages the system’s main CPU and memory to perform RAID calculations.