Huawei+atn+910da+datasheet+exclusive |top| -

Huawei ATN 910D-A is a compact, high-capacity 1U router designed specifically for 5G mobile backhaul and VIP private line services

. It serves as a 5G-ready access device that supports high-density 100GE interfaces and advanced features like network slicing and SRv6. Huawei Carrier Key Technical Specifications

The ATN 910D-A is built to handle the massive bandwidth requirements of 5G networks while maintaining a small physical footprint. Switching Capacity : Supports up to Port Density Dimensions : Standard 1U height ( : Dual DC/AC power supply with backup; typical power consumption is approximately Environment : Operating temperature range from , making it suitable for outdoor cabinet installations. Advanced 5G Features Network Slicing

(Flexible Ethernet) to provide hardware-level isolation for different services, ensuring that private line traffic is not affected by mobile traffic. Next-Gen Protocols : Supports

(Segment Routing over IPv6) and EVPN for simplified network programming and automated service deployment. Clock Synchronization : Features high-precision clock synchronization including and Synchronous Ethernet. Intelligent O&M : Incorporates

(In-situ Flow Information Telemetry) for real-time service quality monitoring and hop-by-hop performance detection. Huawei Carrier Documentation and Setup

For detailed technical guidance, you can refer to the following official and community resources: Official Support Huawei Support Portal

provides technical manuals, license queries, and software upgrade instructions. Installation Guides

: Step-by-step hardware setup, including rack mounting and cabling, is available via the ATN 910D-A Installation Guide Product Brochure

: A comprehensive visual overview of specifications can be found in the ATN 910D-A Brochure on this device or details about specific transceivers compatible with its 100GE ports? Huawei ATN 910D-A Support Guide, Manuals & PDF huawei+atn+910da+datasheet+exclusive

The Huawei ATN 910D-A is a compact 1U, 800Gbps high-capacity fixed-port router designed for 5G base station access and VIP private line services. It supports advanced features such as FlexE slicing, SRv6, and iFIT, optimized for high-density, low-latency network environments with an operating temperature range of -40°C to +65°C. Detailed technical specifications and manuals are available on the Huawei Support Site. ATN 910D-A Brochure v2.0 - Scribd

The Huawei ATN 910D-A (often searched with the variations like 910DA) is a high-performance, 1U fixed-box router designed specifically for 5G mobile backhaul and multi-service aggregation. Positioned at the access and aggregation layers, it provides the "last mile" connectivity for base station transport and high-end VIP private lines. Exclusive Technical Specifications

The ATN 910D-A stands out in the ATN 910 Series for its massive switching capacity and high-density port configuration within a compact 1U form factor. Switching Capacity: 800 Gbps (bi-directional). Port Density: 4 x 100GE/50GE ports. 16 x 25GE/10GE/GE ports. 8 x 10GE/GE/FE ports. Dimensions: 442 mm × 220 mm × 44.45 mm (1U height). Weight: Approximately 4 kg. Power Consumption: 180W typical.

Operating Temperature: –40ºC to +65ºC, making it suitable for outdoor cabinet deployments.

Power Redundancy: Supports dual DC/AC inputs with 1+1 backup. Core 5G-Ready Features

The router is built on a programmable NP architecture, ensuring it can adapt to future network requirements without hardware overhauls.

Network Slicing (FlexE): Supports Flexible Ethernet (FlexE) to divide a single physical port into multiple logical slices. This ensures strict bandwidth isolation for different services, such as mission-critical industrial data vs. general consumer traffic.

Advanced Protocols: Fully supports SRv6 (Segment Routing over IPv6) and EVPN (Ethernet VPN), which simplify network protocols and enable automated service provisioning.

High-Precision Synchronization: Essential for 5G networks, it supports 1588v2, G.8275.1 (full-mode OC, TC, BC), and Synchronous Ethernet clocking. Huawei ATN 910D-A is a compact, high-capacity 1U

Intelligent O&M (iFIT): Uses In-situ Flow Information Telemetry (iFIT) for millisecond-level in-band flow detection. This allows operators to visualize service quality and demarcate faults within minutes. Reliability and Deployment

The ATN 910D-A is engineered for carrier-grade reliability with millisecond-level fault detection.

Fast Protection Switching: Supports IP FRR, LDP FRR, and TI-LFA (Topology-Independent Loop-Free Alternate) to ensure protection switching under 50ms.

Environmental Hardening: Its wide temperature range and industrial-grade components allow it to be co-deployed with base stations in harsh environments.

Plug-and-Play: Supports automated rollout through iMaster NCE, significantly reducing the time required for large-scale site deployments. Market Positioning and Cost

As a part of the Huawei ATN Series, the 910D-A helps carriers lower the Total Cost of Ownership (TCO) by unifying 2G, 3G, 4G, and 5G transport on a single platform. Pricing for these units typically ranges from $13,000 to $15,000 for basic configurations, though specialized high-anti-corrosion or high-capacity models can exceed $35,000 depending on the region and license packages. ATN910B - Huawei Carrier

The Huawei ATN 910D-A (often referred to as the 910DA in technical circles) is a high-performance, 1U fixed multi-service access router specifically engineered for the 5G era.

Below is an "exclusive" datasheet-style breakdown of its core capabilities and a narrative "story" of how it functions in modern networks. The Narrative: The "Last-Mile" Powerhouse In the story of a global 5G rollout, the ATN 910D-A

acts as the critical bridge between massive core networks and local base stations. While core routers handle terabits of data, the Fanless, passive cooling – zero moving parts, 100%

sits in the "last mile," ensuring that high-speed data—whether from a 5G cell tower or a high-priority "VIP" corporate private line—is delivered with millisecond precision.

Its "exclusive" value lies in its density-to-size ratio. It fits into tight cabinets alongside wireless baseband units (BBUs), yet provides a massive 800 Gbps switching capacity, allowing it to aggregate heavy traffic without breaking a sweat. Exclusive Technical Datasheet: ATN 910D-A Category Specifications & Features System Capacity 800 Gbps switching capacity in a 1U chassis. Interface Density 4 × 100GE/50GE + 16 × 25GE/10GE/GE + 8 × 10GE/GE/FE. 5G Readiness Supports SRv6, EVPN, and FlexE for network slicing. Precision Timing