Hx8872-c Datasheet Hot! -

The Himax HX8872-C is a specialized Timing Controller (T-CON) and display driver IC designed by Himax Technologies

. It serves as the critical bridge between standard video processors and TFT-LCD flat panels used in televisions, tablets, and automotive monitors. This article provides a comprehensive overview of the

based on typical datasheet parameters, hardware architecture, and integration guidelines. 🛠️ Key Technical Specifications

datasheet highlights several operational and electrical specifications tailored for power-sensitive and high-speed display modules: Specification Manufacturer Himax Technologies Display Type TFT-LCD Driver / Timing Controller Supported Resolution Up to HD (1366 x 768) Package Options TQFP-64 / QFN-48 Core Supply Voltage 2.3V to 3.6V (3.3V typical) Output Voltage Range 10V to 40V (for gate driving) Clock Frequency 30 MHz to 115 MHz Typical Interfaces LVDS or MLVDS / SPI Operating Temperature -20°C to +85°C 🧠 Core Architecture and Features

integrates multiple advanced image processing and panel-driving technologies into a single silicon die. 1. Advanced Image Processing

Over-Drive Technology: Actively minimizes motion blur and ghosting by accelerating liquid crystal response times during rapid color transitions.

Content Adaptive Backlight Control (CABC): Analyzes the on-screen image content to dynamically adjust the panel's backlight. This drastically reduces power consumption while maintaining perceived image brightness.

Color Depth Management: Features a 6-bit + Hi-FRC (Frame Rate Control) or true 8-bit color processing workflow to deliver smooth, high-fidelity gradients. 2. High-Speed Data Interface

The chip supports standard Low-Voltage Differential Signaling (LVDS) or Mini-LVDS.

These differential interfaces allow the IC to receive high-bandwidth video data with exceptional electromagnetic interference (EMI) suppression. 3. Integrated Power Management

The device incorporates built-in level shifters and shift registers.

By converting low-voltage logic control signals into the high voltages (up to 40V) required to open and close thin-film transistors, it eliminates the need for external secondary driver ICs. 🔌 Typical Application Circuit Overview To properly integrate the

into a PCB design or troubleshoot an existing display inverter board, engineers should account for the following discrete functional blocks: Power Management Block

A clean, stable power supply is required. Decoupling capacitors (typically 0.1µF and 10µF) must be placed as close as possible to the VDDcap V sub cap D cap D end-sub pins to filter out high-frequency switching noise. Microcontroller / Timing Interface

The timing generation block requires a high-quality clock source. Communication lines, such as SPI (Serial Peripheral Interface), are used for initial configuration, register mapping, and setting the operating modes of the driver. Signal Processing and Output Stage

The incoming video stream goes through internal timing manipulation to sync properly with the physical grid of the display glass. From there, the output stage drives both source lines and gate lines on the display. 📋 Common Use Cases The highly integrated nature of the

makes it a staple component in mid-sized electronic visual outputs:

Automobile Displays: Deployed in navigation heads and digital dashboards where high temperature tolerance (-20°C to 85°C) is mandatory.

Industrial Control Panels: Used heavily in factory HMIs (Human-Machine Interfaces) due to its reliability and immunity to power fluctuations.

Consumer Electronics: Found in HD televisions, medical monitors, and portable testing equipment. ⚠️ Important Sourcing Notes Because the

is an older, specialized component, procurement requires caution:

Supply Limitations: Market stock for this specific chip is often limited, leading to inflated prices or long lead times.

Counterfeit Risks: Some third-party broker platforms flag this component with a heightened risk of counterfeit or refurbished parts.

To secure genuine parts, purchasing should be restricted to verified global supply networks or official franchised distributors like Win Source Electronics or Jotrin Electronics.

If you are currently drafting a PCB schematic or actively troubleshooting a display hardware fault, let me know:

The exact package type you are working with (TQFP-64 or QFN-48)? The input video protocol your main processor is outputting?

Whether you are dealing with a blank screen or visual artifacting?

I can provide targeted peripheral component values or specific terminal voltage checks to assist you further. HX8872-C Himax – Price, Stock & Datasheet - WIN SOURCE hx8872-c datasheet

, manufactured by , is a specialized integrated circuit (IC) primarily utilized for high-quality image and video processing in electronic devices like LCD panels. WIN SOURCE Key Electrical Specifications Based on technical documentation from , the device operates within the following parameters: Supply Voltage ( cap V sub cap D cap D end-sub Regulated Output Voltage ( cap V sub cap O cap U cap T end-sub Operating Frequency: Supports up to Current Consumption: Active Mode: Standby Mode: Dropout Voltage:

(minimum input-to-output difference required for regulation). Regulation Accuracy: Typical load and line regulation is Functional Features Thermal Protection:

Includes an automatic shutdown feature if the internal temperature exceeds 150 raised to the composed with power cap C to prevent hardware damage. Power Management: Features an enable pin (

) to toggle between active (High) and low-power standby (Low) states. Image Processing:

Optimized for high-resolution video data management between a microcontroller and display hardware. WIN SOURCE Typical Circuit Application

In a standard configuration, the HX8872-C is often integrated into a system containing: A Microcontroller: To send and receive display data. Timing Control:

Often requiring an external crystal oscillator for precise clock signals. Backlight Circuitry: To manage the illumination of the connected LCD. Support Components:

Resistors and capacitors for signal integrity and voltage stability.

For procurement or full technical data, you can view inventory details at WIN SOURCE Jotrin Electronics for the power supply and enable pins? HX8872-C Himax – Price, Stock & Datasheet - WIN SOURCE

The Himax HX8872-C is a specialized TFT-LCD Gate Driver IC used primarily for image and video processing in electronic devices like smartphones, tablets, and automotive displays. While a full official PDF datasheet can be difficult to access directly without a manufacturer account, technical parameters and purchasing options are available through various industry suppliers. Technical Specifications

According to data from Utsource and Ariat-Tech, the HX8872-C features: Package Type: Available in TQFP-64 or QFP-64 packaging. Channel Count: 240 Channels. Supply Voltage: Operating range of 2.3V to 3.6V. Output Voltage: Range of 10V to 40V. Clock Frequency: Supports up to 18 MHz. Interface: Uses a Serial Peripheral Interface (SPI). Operating Temperature: Rated for -20°C to 85°C. Purchase Options

If you are looking for this specific part, it is available from several retailers:

Individual Units: You can find single pieces at eBay - dalbani_global for ~$16.95 or eBay - max1480 for ~$6.34.

Industrial Suppliers: Large-scale distributors like Jotrin Electronics and Win Source also list the part for bulk or professional needs.

Circuit Diagrams: A PDF of a TV circuit diagram utilizing the is hosted on Scribd for reference.

Note: Be aware that some sources report a high "fake threat" (up to 61%) for this component in the open market, so sourcing from reputable, verified distributors is recommended. HX8872-C | In Stock | Utsource

HX8872-C Datasheet Write-up

Introduction

The HX8872-C is a highly integrated, low-power, and feature-rich display driver IC (DDI) designed for various display applications, including mobile phones, tablets, smartwatches, and other portable devices. This write-up provides an overview of the HX8872-C datasheet, highlighting its key features, specifications, and applications.

Key Features

The HX8872-C is a versatile display driver IC that offers a range of features to support various display requirements. Some of its key features include:

Display Type: The HX8872-C supports various display types, including TFT LCD, IPS, and VA panels.
Resolution: It supports a wide range of resolutions, from QVGA (320x240) to HD (1280x720) and FHD (1920x1080).
Interface: The HX8872-C features a variety of interface options, including RGB, MIPI DSI, and LVDS.
Power Consumption: The IC has a low power consumption design, making it suitable for battery-powered devices.
Operating Temperature: The HX8872-C operates over a wide temperature range of -20°C to 85°C.

Specifications

Here are some detailed specifications of the HX8872-C:

Supply Voltage: 2.5V to 3.3V
Operating Current: 10mA (typical)
Sleep Mode Current: 1μA (typical)
Display Resolution: Up to FHD (1920x1080)
Display Type: TFT LCD, IPS, VA
Interface: RGB, MIPI DSI, LVDS
Package: 64-pin QFN (6mm x 6mm)

Applications

The HX8872-C is suitable for a wide range of display applications, including:

Mobile Phones: The HX8872-C's low power consumption and high display resolution make it an ideal choice for mobile phones.
Tablets: The IC's support for high-resolution displays and various interfaces make it suitable for tablets and other portable devices.
Smartwatches: The HX8872-C's low power consumption and small package size make it a good fit for smartwatches and other wearable devices.
Automotive Displays: The IC's high display resolution and wide operating temperature range make it suitable for automotive display applications.

Conclusion

In conclusion, the HX8872-C is a highly integrated and feature-rich display driver IC designed for various display applications. Its low power consumption, high display resolution, and versatile interface options make it an ideal choice for mobile phones, tablets, smartwatches, and other portable devices. With its wide operating temperature range and small package size, the HX8872-C is a suitable solution for a wide range of display applications. The Himax HX8872-C is a specialized Timing Controller

The is a high-performance TFT-LCD Gate Driver and Timing Controller (T-CON) primarily manufactured by Himax Technologies. It is designed to manage high-definition display signals for a wide range of consumer and industrial electronics. Technical Specifications

The HX8872-C datasheet highlights its efficiency and versatility for modern display panels. Supply Voltage ( VDDcap V sub cap D cap D end-sub

): Typically operates between 2.3V and 3.6V, though some variants support a wider input range of 2.0V to 5.5V.

Power Consumption: Extremely efficient with a typical power draw of 2.0 mW at 3V and a maximum operating power of 1W.

Clock Frequency: Supports high-speed operations up to 18 MHz or 24 MHz in certain configurations. Channel Count: Features 240 channels for gate driving.

Operating Temperature: Rated for industrial-grade stability between -20°C and 85°C.

Package Type: Most commonly found in a TQFP-64 or QFP-64 package, suitable for compact surface-mount assembly. Key Features & Capabilities

High Integration: Includes built-in shift registers and level shifters to reduce overall component count in display modules.

Low Power Mode: Features a standby mode that drops current consumption to a minimal 1.0 to 2.0 μA.

Enhanced Stability: Designed with high noise immunity and thermal protection that triggers a shutdown at 150°C to prevent hardware failure.

Compatibility: It is a direct pin-compatible alternative for older chips like the C108872 and can often replace HX8872-E models with minimal PCB changes. Primary Applications

The HX8872-C is a versatile component found in numerous devices requiring precise image processing: Consumer Tech: Smartphones, tablets, and digital cameras.

Home Entertainment: LCD/LED televisions, especially those with a 1366 x 768 resolution.

Automotive: Navigation systems and dashboard infotainment displays.

Industrial & Medical: Control panels and high-resolution diagnostic monitors. Purchasing Information Reliable vendors for this part include: Utsource (Offers extensive technical parameter lists). Latinafy (Provides usage ideas and compatibility FAQs).

Jotrin Electronics and Ariat Tech (Carry stock for specialized variants like the HX8872-C030FCG).

Are you looking to replace a specific chip in an existing display, or are you designing a new circuit from scratch? HX8872-C Himax – Price, Stock & Datasheet - WIN SOURCE

is a high-performance Timing Controller (T-CON) manufactured by Himax Technologies

, specifically designed for driving high-definition TFT-LCD and LED display panels. It is primarily utilized in automotive navigation systems, tablets, and consumer electronics like digital cameras and mobile phones. Core Specifications

The device serves as a bridge between the system interface and the display's source/gate drivers, managing pixel data and timing signals. Himax Technologies, Inc Display Support : Optimized for HD resolutions (up to 1366 x 768 Operating Voltage : Standard operating voltage, with a digital supply range of 2.0V to 5.5V Frequency Range : Supports a clock frequency between 25MHz and 90MHz Package Type : Typically available in a (64-pin Quad Flat Package). Interfaces : Compatible with standard for microcontroller integration (e.g., STM32, ESP32). Key Features Advanced Image Processing : Includes Content-Adaptive Backlight Control (CABC) over-drive technology to improve energy efficiency and reduce motion blur. Power Management

: Features a low-power standby mode with current consumption as low as 1.0 to 2.0 μA Thermal Protection : Integrated automatic shutdown if temperatures exceed to prevent hardware damage. : Maintains a stable regulated output (typically ) with minimal dropout voltage (0.3V to 0.5V). Application Guidance When integrating the HX8872-C into a project: Thermal Design

: Ensure proper heat dissipation as it is used in high-speed image processing. Power Stability

: Use a stable power source to avoid fluctuations, as the device is sensitive to line regulation for optimal image clarity. Variant Note HX8872-C030FCG variant specifically supports up to for faster data transfers in segment-heavy displays. WIN SOURCE

For procurement or full technical analysis, you can find inventory and request full PDFs from industrial distributors like Win Source Jotrin Electronics or specific initialization code for a particular microcontroller? HX8872-C Himax – Price, Stock & Datasheet - WIN SOURCE

Where to find the real datasheet (free & safe)

Himax official (login required often) – not public
Panelook.com – search “HX8872-C” → often has full PDF
Alldatasheet.com / Datasheet4U – check version (-C vs -B: different gamma)
GitHub – look for embedded driver libraries (e.g., Arduino/TFT_eSPI user setups)

The HX8872-C is a high-performance integrated circuit (IC) primarily designed as a display controller or timing controller (TCON), often utilized in driving liquid crystal displays (LCDs) for consumer and automotive electronics. Key Specifications & Features

Manufacturer: Typically associated with Himax Technologies or used in modules by manufacturers like LG.

Package Type: Commonly available in a 64-pin QFP (Quad Flat Package). Operating Characteristics: Display Type : The HX8872-C supports various display

High-Speed Processing: Optimized for high-speed data transmission and signal processing to ensure smooth visual output.

Efficiency: Designed for low power consumption, making it suitable for portable battery-operated devices.

Signal Integrity: Engineered for low noise and high reliability in demanding environments. Typical Applications

The HX8872-C is versatile and found in several technology sectors:

Consumer Electronics: Mobile phones, digital cameras, and handheld audio/video equipment.

Automotive Systems: Integrated into GPS navigation units and car infotainment/audio systems.

Industrial Displays: Used in control panels requiring reliable high-speed data processing. Equivalent/Substitute Parts

If the HX8872-C is unavailable, the SSD1963 is often cited as a functional substitute, as it also serves as a robust display controller for TFT panels with integrated PLL and similar resolution support. Technical Documentation & Availability

You can find further details and procurement options via electronic component distributors:

Jotrin Electronics provides availability and general product meeting standards.

UTSource offers a breakdown of physical attributes and application references. HX8872-C | In Stock - utsource

9. How to Obtain the Official HX8872-C Datasheet

Because the HX8872-C is a proprietary component from Himax Technologies, the full datasheet (80-120 pages) is not always publicly available due to NDA restrictions. To get the complete document:

Visit Himax's official website (www.himax.com.tw) – Search under "Display Driver ICs" or "Bridge ICs".
Contact an authorized distributor: Arrow Electronics, Avnet, or Win Source.
Request via LCD module vendors: If you bought a display with the HX8872-C built-in (e.g., 4.0" 720x1280 MIPI panel), the module vendor often provides a truncated datasheet.
Alternative sources: Datasheet archive websites (use with caution – check revision dates). Look for files named HX8872-C_DS_v1.2.pdf or HX8872-C_Application_Note.pdf.

Warning: Many online "datasheet" sites host outdated or incorrect versions. Always verify the revision letter (e.g., Rev. C vs Rev. A).

What is the HX8872-C?

The HX8872-C is a TFT-LCD panel timing controller (TCON) or a display driver IC, often used in small to medium-sized LCD panels (e.g., 3.5″ to 7″). It’s typically produced by Himax Technologies (common “HX” prefix). This IC converts incoming video data (like RGB, LVDS, or MIPI) into signals that drive column and row drivers of an LCD.

Likely Key Features (Typical for HX88xx Series)

Supports parallel RGB or serial peripheral interface (SPI) control
Built-in gate and source driver timing generation
Available in a QFN or COG (chip-on-glass) package
Supports up to 24-bit RGB (16.7M colors)
On-chip power sequencing for panel power rails
Low power consumption for portable devices

10. Conclusion

The HX8872-C remains a popular choice for converting parallel RGB to MIPI DSI in embedded systems, automotive displays, and industrial HMI devices. By understanding the pinout, power sequencing, I2C register map, and MIPI routing constraints summarized above, you can successfully integrate this bridge into your design.

Remember that while this guide provides the core technical details found in a standard datasheet, critical information such as exact register bit fields, AC timing charts, and PCB layout reference footprints must be obtained from the official Himax datasheet under NDA.

Search recommendation for further reading: "HX8872-C application note timing parameters" or "Himax RGB to MIPI bridge design checklist".

Disclaimer: All specifications mentioned are typical values based on industry reference designs. Himax Technologies reserves the right to change specifications without notice. Always validate with the latest official documentation.

The HX8872-C is a high-performance TFT-LCD Gate Driver IC manufactured by Himax Technologies. Often found in the heart of consumer electronics, it acts as a Timing Controller (T-Con) that manages high-definition visuals for LCD and LED panels, typically supporting resolutions like 1366 x 768. The Story of the HX8872-C

In the bustling labs of Himax, engineers sought to create a bridge between digital data and vibrant imagery. They developed the

, a specialized 64-pin TQFP-64 package designed to be the "brain" behind the screens of smartphones, tablets, and automotive navigation systems.

The chip was built to survive harsh environments, operating steadily from -20°C to 85°C. It gained a reputation among manufacturers for its "low noise" and high integration, which allowed developers to shrink their circuit boards without sacrificing display clarity.

One day, a repair technician discovered that an older display panel was flickering. By referencing the HX8872-C datasheet, they realized this IC could operate on a flexible 2.3V to 3.6V range, making it a perfect, more efficient replacement for older, power-hungry controllers. This simple swap breathed new life into the device, proving that even a tiny chip can be the difference between a dark screen and a brilliant high-definition experience. Key Technical Specs Channels: 240 Channels for high-density display control. Voltage: Typical operating voltage of 3.3V. Interface: Connects via SPI (Serial Peripheral Interface).

Power Consumption: Efficient operation at approximately 2.0 mW @ 3V.

Clock Frequency: Supports up to 18 MHz (with some variants reaching 30 MHz).

HX8872-C HIMAX Integrated Circuits (ICs) - Jotrin Electronics