To program the Icom IC-F310 , you generally need legacy CS-F300 software and specific hardware interfaces. Because this is older commercial equipment, the software typically runs in an MS-DOS environment. 1. Required Hardware & Software Software: Use

(Version 1.2 or higher) designed for the IC-F310/F320 and F410/F420 series. Programming Cable: Use the Go to product viewer dialog for this item. adapter cable. This often connects to an Go to product viewer dialog for this item. RS-232 level converter.

PC Interface: A computer with a physical DB-9 serial port is recommended. If using a USB-to-Serial adapter, ensure it uses a reliable chipset like FTDI and have the correct drivers (e.g., Go to product viewer dialog for this item. ) installed. 2. Setup and Connection Connect the Cable: Plug the Go to product viewer dialog for this item.

into the radio's microphone jack and connect the other end to your PC's serial port.

Power On: Ensure the radio is connected to a stable DC power source (not exceeding 16V) and turn it on. Boot Environment : Since

is a DOS-based program, you may need to use a DOS emulator (like DOSBox) or a native DOS boot disk on modern Windows systems. 3. Programming Steps

Part 6: Alternatives to Windows XP/7

If you maintain a fleet of IC-F310s, consider these hardware solutions to avoid driver hell:

  1. Dedicated Programming Laptop: Buy a refurbished Dell Latitude or Panasonic Toughbook running Windows 7 32-bit. Keep it offline. Dedicate it to CS-F310 and CS-F3200 programming. Cost: ~$150.
  2. Virtual Machine: Use VMware or VirtualBox to run Windows XP inside your Windows 11 machine. Pass the USB cable directly to the VM (requires VT-x enabled in BIOS).
  3. Hardware Cloner (COP-F3160): Icom makes a standalone cloning box. You program one master radio, put it in the cloner, and press a button. It clones to blank rigs without a PC. Ideal for large fleets of 50+ units.

Warning About Free Downloads:

You will find websites offering "free Icom IC-F310 programming software cracks" or "CS-F310 keygen." These are dangerous and illegal for several reasons:

  • Malware Risk: Cracks often contain ransomware, keyloggers, or trojans.
  • Bricked Radios: Modified software can write corrupt data to your radio, permanently damaging the codeplug.
  • No Support: You cannot receive technical support from Icom or dealers.
  • Legal Liability: Unauthorized modification of radio software violates FCC regulations (if you transmit on non-licensed frequencies) and Icom’s EULA.

Alternatives

  • CHIRP (free) – Does not support the IC-F310. You must use Icom’s software.
  • RT Systems – Offers a third-party programming solution ($50–75) with a more modern interface and better USB support. Highly recommended if you aren’t a dealer.
  • Used/dealer leftover CDs – Sometimes available on eBay, but beware of counterfeit or virus-ridden downloads.

2.3 The Driver Nightmare

The IC-F310 expects a standard RS-232 COM port (usually COM1-COM4). USB cables create a virtual COM port (VCP). The CS-F310 software is ancient—it often crashes if the COM port number is above 4.

Solution: After installing your USB cable driver, go to Device Manager > Ports (COM & LPT). Right-click your USB Serial Port > Properties > Port Settings > Advanced. Change the COM Port Number to COM2 or COM3.

Step-by-Step Guide to Programming Your Icom IC-F310

Once you have the legitimate CS-F310 software and a functional cable, follow these steps:

Step 5: Program Your Channels and Settings

Now, edit the codeplug:

  • Common > Band: Set the frequency band (VHF).
  • Memory Channel: For each channel (1–128), enter:
    • Receive Frequency (e.g., 151.820 MHz)
    • Transmit Frequency (often same for simplex, different for repeater)
    • Channel Name (e.g., "MAINT")
    • Squelch Type (None, CTCSS, or DTCS)
    • CTCSS/DTCS Code (e.g., 67.0 Hz)
    • Transmit Power (High/Low)
  • Menu > Key Assignment: Assign features to P0-P3 buttons.
  • Scan > Scan List 1: Add which channels are scanned.

D. Programmable Keys (Deep Customization)

The F310 has 4 front keys + 2 side keys (PTT excluded). The software allows redefining each key’s short/long press behavior. Available functions include:

  • Zone Up/Down
  • Monitor / Squelch Off
  • Talk Around (repeater bypass)
  • Emergency (triggers emergency alert with GPS/ID)
  • Lone Worker (needs user response every X seconds – safety feature)
  • Man Down (if equipped with optional board – not all F310s have it)
  • Surveillance Mode (turns off LEDs, beeps, and backlight for covert operation)
  • Scrambler On/Off
  • High/Low Power Toggle

Phase 3: First Launch & Radio Reading

  1. Connect the programming cable to the IC-F310’s side jack (under the waterproof cover).
  2. Turn the radio ON.
  3. Launch CS-F310.
  4. Go to File > Read (or press F5).
  5. The software will ask for the COM port. Select COM2 (OPC-1122).
  6. You should see a progress bar: Reading from Radio...
  7. If you get a Timeout Error or No Response from Transceiver: Check your cable connection, radio battery level (must be above 7.0V), and COM port speed (try setting to 9600 baud in Device Manager).

Our Vision

“To take life to new levels of satisfaction; something that has resulted in the amalgamation of the best in man, machine and media of delivery …”

Pushpanjali construction has constantly endeavored to add value to the way people live. Adding unparalleled quality and ingenuity has been the hallmark of this conglomerate ever since. The policy at Pushpanjali starts with the anticipation of clients needs for value, location and functional aspects of each project.

High-tech Residential Townships by establishing landmark of infrastructure in 3-tier cities of NH2.

Our Mission

“To reach a place in future where Pushpanjali Group is known worldwide for development and marketing of a fine living environment with highest quality and unmatched value-for-money.”

The company’s vision has always been to provide premium quality residential apartment & commercial buildings, at par with the developed world.

Chairman Message

The secret behind success, whether personal, professional or of nation, lies in the hardwork of people associated with it. Pushpanjali Group is surging ahead by following its corporate principles, one being the priority placed on the cultivation of employees talents.

This has made possible for the Group to pursue its business in an efficient and systematic way to transform its technical expertise. We are able to achieve our objectives by having a total commitment to the highest ethical standards and treating everyone with honesty, fairness and respect while conducting our business with the highest level of integrity. We believe in open & informal communication, hard work and prudent financial management.

On Going Projects

To reach a place in future where Pushpanjali Group is known worldwide for development and marketing of a fine living environment with highest quality and unmatched value-for-money.

Our Amenities

Grand gated entry, Round the clock security, Ample parking space, Latest road pattern with water bodies, Market & shopping Complex, Underground electrification.

Pushpanjali Live Project

To reach a place in future where Pushpanjali Group is known worldwide for development and marketing of a fine living environment with highest quality and unmatched value-for-money.

WHY CHOOSE US ?

Specifications of Pushpanjali Constructions Building and Infrastructure of Societies

Flooring

Entrance, Lobby, Room, Drawing, Dining etc. Combination of white marble and green marble model/vitrified Tiles.

Windows

Powder coated aluminium with glazed louvers/hinged and windows with mosquito mesh.

Kitchen

Stainless steel sink with hot and cold water mixer. Kitchen counter top in highly polished Green Marble. No woodwork.

More add-ons

Front Lawn- soft landscape. Wardrobes- specifies space provision(Clear of room size without wood work).

Electrical

TV and Telephone outlet points in living and master bedroom(One AC point in master bedroom).

Walls

All interior walls are plastered painted with oil bound Distemper. kitchen counter of coloured glazed tiles up to 60 cm(2'0")ht.

Doors

Shutter for room-flush door shutter, shutter for toilet/ wet area-teak wood penal door shutter with 12 mm thick with marine ply filler.

Plumbing/Sanitary Fittings: Toilet

Master bedroom toilet and granite counter top. Good quality, vitreous pastel coloured ceramic ware for water closets and washbasin.

Our Team

Get in Touch

We are very approachable and would love to speak to you. Feel free to call, send
us an email, Tweet us or simply complete the enquiry form.

Pushpanjali Palace, Delhi Gate, Agra-282010, U.P, India Tel. : +91 05624024104

Om Sharma (GM Sales)+91 9837 88 55 44

Irfani Ahmed (Business Communication Head)+91 9917 20 08 71

Ms. Anamika Arora (Hr)+91 9389816322