Press ESC to close

Categories

Action Adventure Indie Simulation RPG Casual Strategy Sports Racing
All Games

Icom Ic-v80 Programming Software [repack] Download -

Icom IC‑V80 Programming Software Download

Contact Icom Support:

If you're unable to find or download the software, consider reaching out to Icom's customer support or your local Icom dealer for assistance. They can provide guidance on the correct software and any necessary programming cables or procedures.

To program your Icom IC-V80 , you can use the official Icom software or the third-party RT Systems WCS-V80

programmer. Both options require a compatible PC and a specific cloning cable to connect the radio's speaker/microphone jack to your computer. Official Icom Software: CS-V80

The CS-V80 is the manufacturer’s official "cloning software". It is primarily designed for Windows and allows you to edit memory channels, scan lists, and transceiver parameters on your PC. Software Name Official Source : Check the Icom Japan Support Center Icom America for availability. Required Cable : You will need a cloning cable such as the OPC-478U USB Cable OPC-478/UC Third-Party Option: RT Systems WCS-V80

RT Systems is widely recommended for its user-friendly interface and bundled drivers. It supports both (8/10/11) and Software Name RT Systems WCS-V80 Key Advantage

: The software automatically identifies the COM port and includes a spreadsheet-style layout for easier bulk editing. Required Cable : Typically sold as a kit with the USB-29A Programming Cable Requirements & Setup CS-V80 | Products | Icom Inc.

CS-V80 | Products | Icom Inc. * PROGRAMMING SOFTWARE. * CS-V80. IC-V80 Radio Programming Software - RT Systems

The Icom IC-V80 Go to product viewer dialog for this item. is a rugged, high-power VHF handheld transceiver popular among ham radio enthusiasts for its 5.5W output and military-grade durability. To unlock its full potential—including managing 207 memory channels and complex repeater settings—using dedicated programming software is highly recommended over manual entry. Official Icom CS-V80 Programming Software

The primary tool for this radio is the Icom CS-V80 Cloning Software. This official utility allows users to:

Manage Memory Channels: Easily create, edit, and name up to 200 regular channels, 6 scan edges, and 1 call channel.

Configure Technical Settings: Set frequency offsets, CTCSS/DCS tones, and step sizes for repeater access.

Customize Radio Options: Adjust display settings, key functions, and power-save modes from a Windows PC.

Clone Radios: Quickly write the same configuration to multiple IC-V80 units, ideal for clubs or emergency teams. Alternative: RT Systems WCS-V80

For users seeking a more feature-rich interface, RT Systems offers the WCS-V80 software. This version is often preferred for its:

External Data Integration: Built-in links to repeater databases (like RFinder or RepeaterBook) to automatically populate local frequencies.

Cross-Platform Compatibility: While primarily for Windows (Win 8 to Win 11), some RT Systems models offer Mac support.

Hardware Bundles: Often sold with a high-quality USB-29A programming cable, ensuring driver compatibility. Software Download & Installation Guide

To get started with your programming, follow these general steps:

Locate the Download: Visit the Icom Global Support page or an authorized dealer like RT Systems to acquire the software.

Prepare the Hardware: You will need a compatible PC-to-radio programming cable (typically a USB-to-stereo jack type).

Install Drivers: Install the cable drivers before connecting the hardware to your PC.

Install Software: Unzip the downloaded file and run the setup wizard. For official Icom software, you may need a product ID found on the original CD or purchase confirmation.

Sync the Radio: Connect the cable to the radio's speaker/mic jack, turn the radio on, and select "Get data from radio" in the software to establish a baseline configuration. Programming Tips CS-V80 | Products | Icom Inc.

CS-V80 | Products | Icom Inc. SOFTWARE. PROGRAMMING SOFTWARE. CS-V80. PROGRAMMING SOFTWARE. CS-V80. Descriptions / Specifications. IC-V80 Radio Programming Software - RT Systems

Since you haven’t specified a particular website or a specific software title (there are several versions available online), I have reviewed the most common and official options available for programming the Icom IC-V80.

Here is the breakdown of what to expect, where to get it, and the pros and cons.

Where to Download (Legit Sources)

| Source | Notes | |--------|-------| | Icom America (icomamerica.com) | Official downloads – requires registration | | Icom Europe (icomuk.co.uk) | Region-specific versions | | Icom Japan (icom.co.jp/world) | Global releases | | Authorized Dealers | Often provide CD or download link |

⚠️ Important: You will need the OPC-478 or OPC-478UC programming cable (USB-to-TT-Serial) and proper drivers. The software alone cannot interface with the radio without this cable.

Problem: Software Crashes When Writing

3. Hardware Requirements (The Programming Cable)

The software is useless without the correct interface cable to connect the radio to the computer.

What is CS-V80?

CS-V80 is the proprietary Windows-based application designed specifically for the IC-V80 and its sibling, the IC-V80E (European version). It supports all functions of the radio, including:

5. Installation and Setup Guide

Once the software (CS-V80) and cable are obtained, follow these steps:

  1. Driver Installation: If using a third-party cable, install the USB drivers before plugging in the cable. If using the official Icom OPC-478UC, plug

Icom IC-V80 requires specific software and hardware for PC programming. The official utility is the

, which allows users to manage memory channels and transceiver settings via a computer. Official Icom Software: CS-V80

is the manufacturer's official "cloning software" designed for the IC-V80 and IC-V80 Sport models. It is primarily a Windows-based application that provides a spreadsheet-style interface for editing scan lists and repeater frequencies. Capabilities

: Edit memory channels, configure power levels, and store backup radio configurations on your PC. Where to find it : Detailed product information is available on the Icom Japan CS-V80 page

. Note that while listed as an option, Icom often distributes this software through authorized dealers rather than as a direct free download from their main support site. Icom America Alternative: RT Systems WCS-V80 Many users prefer the RT Systems WCS-V80 software

because it offers broader operating system support and a more modern interface. RT Systems, Inc. Operating Systems : Compatible with Windows 8/8.1, 10, and 11 , as well as macOS 10.13.6 or higher Key Features

: Includes built-in links to external repeater databases, automated "read/write" functions, and column editing to quickly update multiple channels. RT Systems, Inc. Required Hardware

Software alone cannot program the radio; you must have a compatible data cable to connect the IC-V80's [SP/MIC] jack to your computer. Icom Europe Icom CS-V80 - software for IC-V80 - Radioscanner.Ru Icom Ic-v80 Programming Software Download

To program your Icom IC-V80 via computer, you need the specific

cloning software. Below is the essential information for downloading and using the official software. Official Software Details The official programming software for this model is the Icom CS-V80 Official Download:

You can find the latest firmware and software updates on the Icom Japan Support Database Note on Licensing: While firmware updates are often free, the full

cloning software is typically a paid product. It is often bundled with the OPC-478UC USB cloning cable or sold separately through authorized Icom dealers. Hardware Requirements To connect your radio to your PC, you will need: Cloning Cable: (USB type) or OPC-478 (Serial type). USB Drivers: If using the USB cable, you must download the Icom OPC-478UC USB Driver to ensure your computer recognizes the device. Installation Steps Install the Driver First:

Plug in your USB cloning cable and install the USB drivers before opening the programming software. Install CS-V80: Run the setup file for the CS-V80 software. Connect the Radio:

Turn off the radio, connect the cable to the speaker/mic jack, and then turn the radio back on. COM Port Settings:

In the software, go to the "COM Port" settings and select the port assigned to your USB cable (check "Device Manager" on Windows to confirm the port number). Third-Party Alternative: CHIRP If you are looking for a free, open-source alternative, the is supported by CHIRP Next

The official software for the Icom IC-V80 is the CS-V80 cloning software. It allows you to manage frequencies, memory channels, and radio settings via a Windows PC. 💾 Official Download & Options

The Icom IC-V80 can be programmed using two primary software suites:

Icom CS-V80 (Official): This is the manufacturer's proprietary software. It is typically purchased as a kit or provided by authorized dealers. You can find technical details on the Icom Japan Product Page.

RT Systems WCS-V80 (Third-Party): Many users prefer this for its "point-and-click" spreadsheet layout and easy driver management. It is available for purchase on the RT Systems IC-V80 Page. 🛠️ Requirements for Programming

To successfully program your IC-V80, you will need the following items:

Programming Cable: A specialized cable (usually USB to 2-pin Icom connector) like the OPC-478UC.

Operating System: Most software versions support Windows 10 and Windows 11.

USB Drivers: Ensure the drivers for your specific cable are installed before connecting the radio. 📝 How to Program Your Radio Install Software: Run the installer for CS-V80 or WCS-V80.

Connect Cable: Plug the USB end into your PC and the 2-pin jack into the radio’s speaker/mic port. Power On: Turn the radio on.

Read Data: In the software, select "Read from Radio" to pull the current configuration.

Edit Channels: Enter your frequencies, offsets, and tones (CTCSS/DCS).

Write Data: Select "Write to Radio" to save your new settings. 💡 Pro Tips

Check COM Ports: If the software can't find your radio, check the "Device Manager" in Windows to ensure the cable is assigned to a valid COM port.

Battery Level: Always ensure your radio has a full charge or is connected to power during the "Write" process to prevent data corruption.

Manual Backup: It is always a good idea to download the manual for reference on button combinations for field programming. If you'd like, I can help you: Find the specific COM port settings for your PC.

Guide you through manual frequency entry without a computer.

Troubleshoot connection errors between the radio and software.

The Icom IC-V80 is a rugged, military-grade VHF handheld transceiver widely used by amateur radio operators and professionals alike. While manual keypad programming is possible, using the Icom IC-V80 Programming Software is the most efficient way to manage its 200 memory channels, scan lists, and advanced menu settings. Official and Third-Party Software Options There are two primary software choices for the IC-V80:

Icom CS-V80 (Official Software): This is the manufacturer's official "Cloning Software". It allows you to store and edit memory channels, VFO parameters, and transceiver settings on a PC. It is designed for Windows operating systems. You can find it listed on the Icom Japan or Icom America official websites.

RT Systems WCS-V80: A popular third-party alternative known for its user-friendly "spreadsheet" layout. It includes built-in links to external repeater databases like Repeater Book and Radio Reference, making it easy to find and import local frequencies. It supports Windows 7 through Windows 11. Essential Hardware: The Programming Cable

To connect your radio to a computer, you need a specialized programming cable.

Official Cable: The OPC-478 (serial) or OPC-478UC (USB) is typically required for Icom's CS-V80 software.

RT Systems Cable: If using RT Systems software, it is highly recommended to use their USB-29A cable to ensure driver compatibility. How to Download and Install IC-V80 Radio Programming Software - RT Systems

Icom IC-V80 is a rugged, military-grade VHF handheld transceiver popular among amateur radio operators for its durability and powerful 5.5W output. While the radio can be programmed manually, utilizing official or third-party software is the most efficient way to manage its 200 memory channels and complex menu settings. Essential Programming Software for the IC-V80

To program the IC-V80 from a computer, you have two primary software options: Official Icom CS-V80 Cloning Software

: This is the manufacturer’s original utility. It allows users to edit memory channels, scan lists, and transceiver parameters on a Windows PC. It is often sold as a kit or available through authorized dealers like Radioworld UK RT Systems WCS-V80 Programmer

: A highly recommended third-party alternative known for its user-friendly spreadsheet layout. It features advanced tools like column editing and direct imports from online repeater directories. The RT Systems WCS-V80 Programming Kit

includes a dedicated USB-29A cable, which is required for the software to function correctly. Hardware Requirements

Software alone cannot communicate with the radio; a specialized cloning cable is mandatory:

: The official Icom USB cloning cable used with the CS-V80 software.

: The proprietary RT Systems cable designed for their WCS-V80 software. The Programming Process Installation Where to Download (Legit Sources) | Source |

: Install the drivers and software on a Windows PC before connecting the cable. The "Read" Operation

: Always perform a "Read from Radio" first. This captures the radio's current internal configuration to your PC, ensuring compatibility and providing a backup before making changes. Data Entry

: Use the software to name channels (alpha-tagging), set offset frequencies for repeaters, and configure CTCSS/DTCS tones. The "Write" Operation

: Send the updated file back to the transceiver to apply the new settings. Where to Download Manuals and Support Files For those looking for documentation or firmware updates: WCS-V80 Programming Kit for the Icom IC-V80 - RT Systems

To program the Icom IC-V80 , you will need the specific cloning software and a compatible programming cable. There are two primary software options depending on whether you want the official Icom utility or a third-party solution. 1. Official Icom Programming Software (CS-V80) Icom CS-V80

is the manufacturer's official cloning software designed specifically for the IC-V80 and IC-V80E models. www.icomjapan.com Functionality:

Allows you to edit and store memory channels, scan lists, and various transceiver settings using a Windows-based PC. Where to Download:

Official software is typically purchased through authorized Icom dealers like System Requirements: Compatible with standard Windows operating systems. www.dnd.hu 2. RT Systems Programming Software (WCS-V80) RT Systems

offers a highly popular alternative that is often considered more user-friendly than the factory software. www.rtsystemsinc.com Software Name: Key Features:

Includes a spreadsheet-style layout and the ability to pull repeater data directly from online databases like RepeaterBook or RadioReference. Compatibility:

Works with Windows 8.1, 10, and 11, as well as MacOS 10.13.6 or higher.

Available as a standalone download or as a kit with a proprietary cable from RT Systems www.rtsystemsinc.com 3. Required Programming Cables

The software cannot communicate with your radio without a physical interface cable. Icom Cables: (USB type) or OPC-478 (serial type). RT Systems Cable: Connection Point: The cable connects to the jack on the side of the radio. Ensure the radio is powered before connecting. www.rtsystemsinc.com 4. Technical Resources IC-V80 Radio Programming Software - RT Systems

To program your Icom IC-V80 handheld transceiver via computer, you need cloning software to manage memory channels and settings effectively. There are two primary software options available: the official Icom CS-V80 and the third-party RT Systems WCS-V80 . Official Icom Software: CS-V80

The Icom CS-V80 is the official cloning software designed specifically for the and IC-V80 Sport models.

Functionality: It allows you to store and edit memory channels, scan lists, and other transceiver parameters on your PC before transferring them to the radio.

Compatibility: It is designed to run on Windows operating systems.

Where to find it: While listed on the official Icom site, it is often sold as a physical product or provided through authorized dealers like WiMo. Some retailers, such as dnd.hu, have marked it as discontinued, so availability may vary. Third-Party Software: RT Systems WCS-V80

The RT Systems WCS-V80 is a popular alternative known for its user-friendly interface and broader OS support.

Key Features: It features a spreadsheet-style layout for easy data entry and includes built-in links to repeater information.

OS Support: Unlike the official software, RT Systems offers versions for both Windows (8, 10, and 11) and macOS (10.13.6 or higher).

Purchasing: You can download it directly from RT Systems as "software only" or as a kit that includes the necessary USB-29A programming cable. Required Hardware

Regardless of the software you choose, you will need a compatible programming cable to connect the radio's speaker/mic jack to your computer's USB port. For the Icom CS-V80 , the OPC-478 or cable is typically required.

For the RT Systems software, the USB-29A cable is recommended for guaranteed performance. IC-V80 Radio Programming Software - RT Systems

Here’s an interesting, slightly dramatized story about the quest for the Icom IC-V80 programming software—based on the real-world challenges ham radio operators often face.

Title: The Ghost in the Radio: One Ham’s Battle with the Icom IC-V80

It was a rainy Tuesday when Dave, call sign KI6ZZZ, found himself hunched over a cluttered desk. In front of him sat his trusty Icom IC-V80—a rugged, brick-like handheld that had survived three field days, a dropped tackle box, and one unfortunate encounter with a mud puddle. But the radio had a problem: its memory channels were a chaotic mess. Repeater frequencies from three states jostled against marine VHF channels and his grandson’s FRS toy frequencies.

“Time to program you the modern way,” Dave muttered, reaching for his laptop.

He’d heard whispers on the eHam forums. The IC-V80 was a fantastic analog workhorse, but Icom had long since discontinued it. The official programming software—CS-V80—wasn’t on Icom’s current website. It had been buried in the digital equivalent of a forgotten filing cabinet.

Act One: The Official Dead End

Dave navigated to Icom America’s support page. He typed “IC-V80” into the search bar. Zero results. He tried “CS-V80.” Nothing. A single community post from 2015 read: “Software for this model is no longer supported. Please contact Icom directly.” He emailed them. Three days later, a polite but useless reply arrived: “That product has reached end-of-life. We do not have the installer available.”

Frustration set in. He could manually program 128 channels via the keypad—but that meant scrolling through menus, twisting the dial 1,200 times, and inviting thumb cramps. There had to be another way.

Act Two: The Underground Railroad of Files

That’s when Dave discovered the shadowy world of “abandonware” for ham radio. A fellow ham on a Discord server sent him a cryptic link: “Try this. It’s the European version. Use at your own risk.”

The file was named CS-V80_Setup_EU_v2.1.exe. It lived on a Russian file-hosting site next to what looked like driver updates for a 2003 printer. Dave’s antivirus screamed. His firewall flashed red. But the call of the repeater list was strong.

He ran it inside a virtual machine—just in case. The installer launched. It was in broken English and Japanese. Miraculously, it worked.

Act Three: The Cable Conundrum

Software installed. Now for the cable. The IC-V80 uses a proprietary OPC-478 serial cloning cable—long discontinued. Amazon sold knockoffs labeled “USB Programming Cable for Icom IC-V80” with 1-star reviews: “Driver doesn’t work on Windows 11.” “Came with a CD-ROM from 2009.” ⚠️ Important: You will need the OPC-478 or

Dave bought one anyway. The CD contained a driver for Windows XP. He spent four hours hunting down a signed 64-bit driver from a Chinese chipmaker’s FTP server. After disabling Windows driver signature enforcement (a ritual that made him feel like a hacker in a 90s movie), the PC finally saw the cable as “COM5.”

Act Four: The Dance of the Bits

He connected the radio, turned the volume to 12 o’clock (some old-timer forum post swore this was required for data voltage), and launched the software. The interface was pure 2002—gray dialog boxes, cryptic checkboxes, and a “Read from Radio” button that seemed too small.

He clicked it.

Error: No response from transceiver.

His heart sank. He tried changing COM ports. Rebooted. Checked the cable with a multimeter. Finally, a different forum buried on page 3 of Google results said: “On the IC-V80, you must press and hold the ‘MONI’ key while powering on to enter clone mode. The software won’t tell you that.”

He did it. The radio screen flashed “CLONE”.

He clicked “Read” again. The progress bar crawled—then jumped. A success chime. On his screen appeared every single channel, tone, and skip setting from the radio’s memory. Dave let out a laugh that scared his cat.

Epilogue: A Lesson in Resilience

By midnight, Dave had built a pristine channel list. He uploaded it to the radio in under ten seconds. The IC-V80 chirped happily. He keyed up the local repeater: “KI6ZZZ, testing. Anyone copy?” A reply came back clear.

He didn’t just program a radio that night. He became part of a quiet brotherhood—the hams who refuse to let useful hardware die because a company stopped distributing software. He even zipped up the installer, the driver, and a text file of instructions, and uploaded it to a dedicated radio hobbyist archive.

Because in ham radio, the signal never really dies. Sometimes you just have to hunt for the frequency.

Moral of the story: If you need the Icom IC-V80 programming software today, check reputable ham radio software archives, ask on user forums like RadioReference or QRZ, and always scan that abandonware for viruses first. And never forget—clone mode requires the MONI key.

Introduction

The Icom IC-V80 is a popular amateur radio transceiver that offers advanced features and capabilities. To get the most out of this radio, users need to program it using the Icom IC-V80 programming software. In this article, we will guide you on how to download and use the Icom IC-V80 programming software.

What is Icom IC-V80 Programming Software?

The Icom IC-V80 programming software is a computer program that allows users to customize and configure their IC-V80 radio settings. The software enables users to edit, save, and load memory channels, set tone squelch and other advanced features. The software is available for download from the Icom website and is compatible with Windows operating systems.

Features of Icom IC-V80 Programming Software

The Icom IC-V80 programming software offers several features that make it easy to program and customize the IC-V80 radio. Some of the key features include:

Downloading Icom IC-V80 Programming Software

To download the Icom IC-V80 programming software, follow these steps:

  1. Visit the Icom Website: Go to the Icom website (www.icom.faq.eu) and navigate to the "Support & Downloads" section.
  2. Select Your Radio: Choose your radio model (IC-V80) and click on the "Downloads" tab.
  3. Select Your Operating System: Choose your operating system (Windows) and click on the "Software" tab.
  4. Download the Software: Click on the "Icom IC-V80 Programming Software" link to download the software.

Installing Icom IC-V80 Programming Software

Once you have downloaded the software, follow these steps to install it:

  1. Run the Installer: Run the downloaded installer and follow the on-screen instructions.
  2. Select the Installation Location: Choose the installation location and click "Next".
  3. Complete the Installation: Follow the on-screen instructions to complete the installation.

Using Icom IC-V80 Programming Software

To use the Icom IC-V80 programming software, follow these steps:

  1. Connect Your Radio: Connect your IC-V80 radio to your computer using a programming cable.
  2. Launch the Software: Launch the programming software and select your radio model (IC-V80).
  3. Read Radio Settings: Click on the "Read" button to read the current radio settings.
  4. Edit Settings: Edit the radio settings as needed, including memory channels, tone squelch, and repeater settings.
  5. Write Settings: Click on the "Write" button to write the updated settings to your radio.

Troubleshooting

If you encounter any issues while downloading, installing, or using the Icom IC-V80 programming software, refer to the troubleshooting guide below:

Conclusion

To program your Icom IC-V80 , you can use either the official Icom cloning software or a third-party alternative like RT Systems. Official Software & Drivers

CS-V80 Programming Software: This is the official utility from Icom for managing memory channels and transceiver settings. You can find the product details on the Icom Japan CS-V80 page or check Icom America for regional availability.

USB Drivers: If you are using an Icom USB programming cable (like the Go to product viewer dialog for this item.

), you must download the USB Driver to ensure your computer recognizes the radio. Third-Party Alternative

RT Systems WCS-V80: Many users prefer the RT Systems WCS-V80 software because it features a more intuitive spreadsheet-style interface and built-in links to external repeater databases. It is available for both Windows and macOS. Programming Guide & Resources

If you don't have a cable yet or prefer manual entry, you can refer to the official documentation: Manual Download: The IC-V80 Instruction Manual

provides step-by-step instructions for manual frequency entry and memory storage.

Basic Setup: To enter a frequency manually, use the keypad to enter 6 digits (starting from the 100 MHz digit) and push [A•FUNC] followed by [C•MR] for 1 second to save it to a memory channel. CS-V80 | Products | Icom Inc.

CS-V80 | Products | Icom Inc. SOFTWARE. PROGRAMMING SOFTWARE. CS-V80. PROGRAMMING SOFTWARE. programming software - Icom America

Common third‑party options