Install Driver Xprinter Xp-d4601b -

How to Install Driver Xprinter XP-D4601B: Complete Setup Guide

The Xprinter XP-D4601B is a high-performance, 4-inch direct thermal label printer designed for logistics, e-commerce, and retail. To ensure seamless operation on Windows, macOS, or Linux, you must correctly install the official drivers.

This guide provides a step-by-step walkthrough for downloading, installing, and configuring your XP-D4601B driver for peak performance.

Xprinter professional 4 inch thermal printer customized for tax Install Driver Xprinter Xp-d4601b

Installing the Xprinter XP-D4601B is a straightforward process that transforms your workspace into a high-speed shipping hub. This 4-inch direct thermal printer is a favorite for e-commerce sellers because it handles labels for Amazon, Flipkart, and Shiprocket with ease, reaching speeds of up to 152 mm/s.

Follow this guide to get your XP-D4601B running on Windows, Mac, or via WiFi. 1. Unboxing and Physical Setup

Before touching any software, ensure your hardware is ready: How to Install Driver Xprinter XP-D4601B: Complete Setup

Connect Power: Plug the power adapter into the back of the printer and a wall outlet. For the best performance, avoid using power strips.

Connect to Computer: Use the provided USB cable (Type-B end into the printer, Type-A into your computer).

Load Labels: Open the cover using the two side buttons. Insert the label roll onto the spindle, ensuring the labels face up as they feed through the guides. Print a Windows test page : Printer properties

Turn it On: Flip the power switch at the back to 'I'. The indicator light should turn green. 2. Downloading and Installing Drivers The XP-D4601B is compatible with Windows, Mac, and Linux. For Windows Users (Recommended)

Windows typically uses Seagull Scientific drivers for the most reliable performance with label design software like BarTender. Thermal Four-inch Label Printer Xp-d4601b

---

4. Test print

• Print a Windows test page: Printer properties → Print Test Page.
• Use Xprinter’s diagnostic tool (if included) to check sensor calibration.

Step 2: Install the Driver

1. Unzip the downloaded folder.
2. Look for a file named Setup.exe or Driver Install.exe.
3. Right-click the file and select Run as Administrator.
4. Follow the installer prompts:
   • Select “Install printer driver”.
   • Choose “USB” (most common) or “Ethernet”.
   • Click Next until the installation finishes.

2) Install on Windows (10 / 11)

1. Unzip the downloaded file if needed.
2. Right-click the installer (.exe) and choose “Run as administrator.”
3. Follow on-screen prompts. When the installer asks, connect the USB cable from the printer to the PC.
4. Windows may display “Installing device driver software” — allow it.
5. When installation completes, open “Devices and Printers” (Control Panel → Devices and Printers) to confirm the printer appears (may show as XP-D4601B or “Xprinter USB Printer”).
6. Right-click the printer → Printer properties → Print Test Page to verify operation.
7. If your application requires ESC/POS compatibility, ensure the driver or application is set to use the XP-D4601B and choose the correct paper size (usually 80mm or 58mm depending on your model).

Troubleshooting (Windows)

• If the printer doesn’t appear: try a different USB port and a different USB cable.
• If Windows installs a generic driver causing cut/format issues: uninstall the device from Device Manager, disconnect USB, reinstall the Xprinter driver, then reconnect USB when prompted.
• If prints are garbled: set the correct baud/port settings are irrelevant for USB, but confirm the application uses the correct printer driver (not a virtual/text-only driver).

5) POS software integration

• In POS/software printer settings choose USB printer and select the XP-D4601B driver.
• For ESC/POS commands, many POS systems can send raw ESC/POS to the installed printer driver—consult your POS documentation and set correct paper width (58 mm or 80 mm).

Error 5: Mac Says "Driver Not Available"

• Fix: You added via AirPrint. Delete the printer. Re-add, but before clicking "Add", click Select Software and manually type "Xprinter" into the search box.

---