Ipm17-002 Motherboard Manual | Bonus Inside

This report provides technical specifications and layout details for the

motherboard, frequently referred to in HP community discussions as the "IPM17-002" or Odense2-K. HP Support Community

This motherboard is primarily found in HP OMEN 870-224 and HP Envy 750 desktop series. HP Support Community Technical Specifications (HP Odense2-K / IPM17-DD2) Manufacturer: Pegatron (custom for HP) Form Factor: Micro-ATX (uATX) Processor Support:

Intel Core i7-7700 (Kabylake), i5-7600K, i5-7400, i3-7100 (Socket LGA 1151) Intel H170 Memory Support:

Two DDR4 SODIMM (260-pin) sockets, supporting up to DDR4-2400MHz Maximum Memory:

Up to 32 GB (unbuffered) with two 16 GB DIMMs on 64-bit systems Expansion Slots: 1x PCI Express x16, 1x PCI Express x1, 1x M.2 (for SSD) Networking: 802.11 a/b/g/n/ac M.2 wireless card HP Support Community Motherboard Layout and Connectors Front Panel Header (F_PANEL): 9-pin header located at the bottom right edge. SATA Connectors: 6x SATA ports. USB Headers: 2x6 USB 2.0 headers. 24-Pin ATX main power, 4-Pin CPU power. HP Support Community Pinout Table (Front Panel - F_PANEL) Power LED + Power Button Reset Switch (Optional) Reserved (NC) Power LED - Power Button return (GND) Reset return (GND) Keyed/Not present HP Support Community Common Upgrades and Compatibility

Supports DDR4 SODIMM (laptop-style memory) running at 2400MHz. Processor:

Supports 7th Generation Kabylake processors (TDP up to 91W). Case Swap:

Due to its micro-ATX form factor, it can fit in standard cases, but the non-standard 2x6 USB headers may require adapter cables. HP Support Community

Note: HP has limited documentation for this specific custom board, but the "Odense2-K" documentation on HP Support HP Community provides the best available information. Pegatron / Odense Motherboard - HP Support Community

The (also known as the ) is an Intel-based micro-ATX motherboard manufactured by Pegatron and primarily used in HP and Compaq desktop computers (such as the HP Pavilion 510 series). 1. Board Specifications Form Factor: Micro-ATX (24.0 x 24.0 cm).

Socket: LGA 1151 (Supports 6th Generation Intel Core "Skylake" processors). Chipset: Intel H170. Memory: Two 288-pin DDR4 UDIMM sockets. Supports PC4-17000 (DDR4-2133). Maximum capacity: 16 GB (2 x 8 GB). Expansion Slots: One PCI Express x16 (Gen 3.0).

One M.2 socket 1, key A (typically for Wi-Fi/Bluetooth cards). 2. Internal Connectors & Storage SATA: Two SATA 3.0 ports (6 Gb/s) for HDDs or SSDs. Power: One 24-pin ATX main power connector. One 4-pin ATX 12V CPU power connector.

Cooling: One 4-pin CPU fan header and one 3-pin system fan header.

Front Panel: Standard headers for power button, reset, and LED indicators. 3. Rear I/O Ports

Video: 1 x HDMI and 1 x VGA (supports integrated Intel HD Graphics). USB: Two USB 2.0 ports and two USB 3.0 ports.

Networking: One RJ-45 Ethernet port (Realtek RTL8111G Gigabit).

Audio: Three 3.5mm jacks (Line-in, Line-out, Microphone) powered by the Realtek ALC3863-CG codec. 4. Jumpers & Configuration

The board features a Clear CMOS (CLR_CMOS) jumper. To reset BIOS settings: Turn off the PC and unplug the power cord.

Move the jumper cap from pins 1-2 (default) to pins 2-3 for 5–10 seconds. Return the cap to pins 1-2 and restart the system. 5. Common Compatible CPUs

The motherboard is optimized for 65W TDP processors. Common compatible chips include: Intel Core i7-6700 / i7-6700T Intel Core i5-6400 / i5-6400T Intel Core i3-6100 / i3-6100T ipm17-002 motherboard manual

The Pegatron IPM17-002 (Odense2-K) is a micro-ATX, LGA 1151 motherboard designed for HP Envy 750 and OMEN 870 systems, featuring the Intel H170 chipset and DDR4 support. It offers PCIe 3.0 slots, M.2 storage capabilities, and integrated video outputs. For technical specifications and front panel layouts, visit the HP Community Support. MOBO Manual for Omen Motherboard IPM17-002

While HP often restricts access to full-service manuals for its motherboards, the (also commonly referred to as Go to product viewer dialog for this item. or Go to product viewer dialog for this item.

) is a common component found in desktops like the HP OMEN 870-224. Technical Specifications Processor Socket: LGA 1151. Chipset: Intel H170. Memory Slots: Dual DDR4 DIMM sockets. Expansion Slots: 1 x PCIe x16 (typically for graphics cards). 1 x M.2 Socket 1, key A for WiFi/Bluetooth. 1 x M.2 Socket 3, key M for NVMe SSDs. Storage: 3 to 4 SATA ports. Front Panel Header Pinout (F_PANEL)

The front panel header is a 9-pin connector usually located at the bottom-right edge of the board. Here is the standard layout: Pin 1 & 2: HDD LED (+/-). Pin 3 & 4: Power LED (+/-). Pin 5 & 6: Power Button (Pin 6 is Ground). Pin 7 & 8: Reset Switch (Optional, Ground). Pin 9: Reserved. Pin 10: Key (no pin present). Processor Compatibility

The board supports several 7th Generation Intel Core (Kabylake) processors up to a 65W TDP: Intel Core i7-7700 Go to product viewer dialog for this item. (3.6 GHz Quad-Core). Intel Core i5-7400 Go to product viewer dialog for this item. (3.0 GHz Quad-Core). Intel Core i3-7100 Go to product viewer dialog for this item. (3.9 GHz Dual-Core). BIOS Access and Setup MOBO Manual for Omen Motherboard IPM17-002

In the year 2142, the world’s most advanced artificial intelligence, ELARA, suffered a catastrophic system failure. The digital mind that managed the Earth’s climate, energy, and communication had gone dark. Civilization teetered on the edge of a total blackout.

Deep within the subterranean archives of the "Old Tech Preservation Society," Elias, a young engineer, found a dusty, handwritten ledger. It wasn't a digital drive or a crystal memory cell. It was paper. On the cover, in faded ink, were the words: IPM17-002 Motherboard Manual

"What is an IPM17-002?" his mentor, Sarah, whispered, her breath hitching in the cold air.

"It’s the ancestor," Elias said, his fingers trembling as he turned the pages. "The very first architecture ELARA was built upon. This manual contains the layout of the 'Primal Core'—the physical hardware buried beneath the city that no one has touched in a century."

The manual was a labyrinth of diagrams and technical specifications. It detailed the LGA1151 socket DDR4 memory slots H110 chipset

. To the modern world, these were ancient runes. But to Elias, they were a map.

As they descended into the lightless bowels of the Central Hub, the manual was their only guide. They bypassed security gates that had long since lost power, guided by Page 14: Front Panel Header Pinout

. Elias used a copper wire to jump the power pins, a "primitive" trick he’d read in the manual’s troubleshooting section.

A faint green LED flickered to life. The Primal Core hummed—a low, rhythmic sound like a waking giant.

"The CMOS battery," Elias realized, looking at Page 22. "It’s dead. The system has forgotten its own identity."

With a spare cell and a steady hand, he replaced the silver disc. He followed the manual’s instructions for a "Cold Boot," holding down a physical reset button that had been covered in grime for decades.

On a nearby terminal, lines of archaic code began to scroll. The IPM17-002 had initialized. Like a spark catching in dry tinder, the signal spread. The ancient motherboard bridged the gap, feeding the base-level instructions back into ELARA’s massive neural network.

The lights in the archive flickered and stayed on. High above, the city’s climate shields stabilized.

Elias closed the manual. The IPM17-002 wasn't just a piece of old tech; it was the foundation of their world. He looked at the printed diagrams one last time, realizing that sometimes, to move forward, you have to remember exactly how you started. technical specifications of the real-world IPM17-002 motherboard or perhaps another short story set in this universe?

A Comprehensive Guide to the IPM17-002 Motherboard Manual Support for Intel LGA 1155 processors : The

The IPM17-002 motherboard is a high-performance, feature-rich mainboard designed for use in a variety of applications, including gaming, content creation, and server environments. As with any complex piece of hardware, understanding the IPM17-002 motherboard manual is crucial to unlocking its full potential. In this article, we'll provide an in-depth look at the IPM17-002 motherboard manual, covering its key features, specifications, and usage guidelines.

Overview of the IPM17-002 Motherboard

The IPM17-002 motherboard is built around the Intel P67 chipset, which provides a robust foundation for high-performance computing. The board supports a range of Intel processors, including Core i3, i5, and i7 models, making it an excellent choice for users seeking to build a powerful desktop system.

Key Features of the IPM17-002 Motherboard

The IPM17-002 motherboard boasts an impressive array of features, including:

Support for Intel LGA 1155 processors: The IPM17-002 motherboard is designed to work with Intel's LGA 1155 socket processors, providing users with a wide range of CPU options.
Dual-channel DDR3 memory support: The board supports up to 16GB of DDR3 memory, with speeds of up to 1333MHz.
Multiple expansion slots: The IPM17-002 motherboard features a range of expansion slots, including two PCIe 2.0 x16 slots, two PCIe 2.0 x1 slots, and two PCI slots.
High-quality audio and networking: The board features 7.1-channel audio, as well as Gigabit Ethernet and Wi-Fi connectivity options.

Navigating the IPM17-002 Motherboard Manual

The IPM17-002 motherboard manual is a comprehensive guide that covers all aspects of the board's installation, configuration, and usage. The manual is divided into several sections, including:

Introduction: This section provides an overview of the IPM17-002 motherboard, including its key features and specifications.
Hardware Installation: This section provides step-by-step instructions for installing the motherboard and its components, including the CPU, memory, and expansion cards.
BIOS Setup: This section explains how to configure the motherboard's BIOS settings, including options for adjusting clock speeds, voltages, and other system parameters.
Troubleshooting: This section provides guidance on troubleshooting common issues with the motherboard, including boot problems, memory errors, and other faults.

Understanding the IPM17-002 Motherboard Layout

The IPM17-002 motherboard manual includes a detailed layout diagram, which shows the location of key components, including:

CPU socket: The LGA 1155 socket for the Intel processor.
Memory slots: The four DDR3 memory slots, which support dual-channel memory configurations.
Expansion slots: The PCIe 2.0 x16, PCIe 2.0 x1, and PCI slots for adding graphics cards, sound cards, and other expansion cards.
Storage connectors: The SATA and M.2 connectors for connecting storage devices.

Configuring the IPM17-002 Motherboard BIOS

The IPM17-002 motherboard manual provides detailed instructions for configuring the BIOS settings, including:

Main Menu: The main BIOS menu, which provides an overview of system settings, including the CPU, memory, and boot devices.
Advanced Settings: This menu provides access to advanced system settings, including clock speeds, voltages, and other system parameters.
Security Settings: This menu allows users to configure security settings, including passwords and boot device priorities.

Troubleshooting Common Issues

The IPM17-002 motherboard manual includes a troubleshooting section, which provides guidance on resolving common issues, including:

Boot problems: Troubleshooting steps for boot-related issues, including boot loops and failed boots.
Memory errors: Troubleshooting steps for memory-related issues, including memory errors and crashes.
Overheating: Troubleshooting steps for overheating issues, including fan configuration and heatsink installation.

Conclusion

The IPM17-002 motherboard manual is a comprehensive guide that provides users with a detailed understanding of the board's features, specifications, and usage guidelines. By following the instructions and guidelines outlined in the manual, users can unlock the full potential of the IPM17-002 motherboard, building a high-performance desktop system that meets their specific needs.

Downloads and Additional Resources

For users seeking additional information or support, the IPM17-002 motherboard manual can be downloaded from the manufacturer's website. Additionally, users can access online forums, technical support resources, and other documentation to help them get the most out of their IPM17-002 motherboard.

Specifications

CPU Support: Intel LGA 1155 processors
Memory Support: Up to 16GB DDR3 memory, speeds up to 1333MHz
Expansion Slots: 2x PCIe 2.0 x16, 2x PCIe 2.0 x1, 2x PCI
Audio: 7.1-channel audio
Networking: Gigabit Ethernet, Wi-Fi

Dimensions

Form Factor: ATX
Dimensions: 305mm x 244mm

Warranty

Warranty Period: 3 years

By understanding the IPM17-002 motherboard manual, users can unlock the full potential of their system, enjoying a high-performance computing experience that meets their specific needs. Whether you're a seasoned builder or new to the world of PC hardware, the IPM17-002 motherboard manual is an essential resource that will help you get the most out of your system.

, also commonly known as the motherboard, is a microATX board primarily used in HP OMEN 870-224 HP Envy 750

desktop systems. While HP does not always provide a standalone retail manual, the following guide consolidates its key technical specifications and critical header pinouts. HP Support Community Core Specifications Form Factor: MicroATX (uATX). Intel H170.

LGA 1151, supporting 6th and 7th Generation Intel Core i3, i5, and i7 processors (Skylake/Kaby Lake). Four DDR4 DIMM (288-pin) sockets. Supports dual-channel architecture.

Maximum Capacity: Up to 64GB (though HP officially tested and recommends up to 32GB). Speed: PC4-17000 (DDR4-2133). Expansion Slots: 1x PCI Express x16 (Gen 3.0). 1x M.2 socket 3, key M (typically for SSDs).

1x M.2 socket 1, key A (typically for Wi-Fi/Bluetooth cards). Front Panel Header Pinout (F_PANEL)

The front panel header is critical when moving this motherboard to a new third-party case. It is a 9-pin header located at the bottom-right edge of the board. HP Support Community Description Positive Hard Drive Activity LED Negative Hard Drive Activity LED Power LED + Positive Power LED Power LED - Negative Power LED Power Button Power Switch connection Power Button GND Return/Ground for Power Switch Reset Switch Optional Reset connection Reset return Ground for Reset Switch Not Connected (NC) Missing pin for orientation Onboard Connectors & I/O

Typically includes 5x SATA 3.0 (6Gb/s) ports for storage drives. Internal Headers: 1x USB 3.0 header. 2x USB 2.0 headers. 1x Front Panel Audio header.

1x 4-pin CPU Fan header and 1x 3-pin or 4-pin System Fan header. Rear I/O Ports: 4x USB 2.0 ports. 2x USB 3.0 ports. 1x HDMI and 1x VGA (Integrated graphics output). 1x RJ-45 Ethernet (Gigabit LAN). 3x Audio Jacks (Line-in, Line-out, Mic). Maintenance Procedures Clearing CMOS:

Locate the 3-pin CMOS jumper. Move the jumper from the default pins (1-2) to the clear pins (2-3) for 5–10 seconds while the system is powered off and unplugged, then return it to the default position. BIOS Password Reset:

There is often a dedicated "PASS_CLR" jumper to erase the BIOS administrator password using a similar process to the CMOS clear. The Retro Web of the board layout or specific BIOS update instructions? How to connect front panel connectors to the motherboard 2 Nov 2012 —

What is the IPM17-002?

First, a crucial reality check: The IPM17-002 is not a retail motherboard. You cannot buy it on Newegg or Amazon.

It is a proprietary board manufactured by Pegatron (a spin-off of ASUS) exclusively for HP (Hewlett-Packard). You will typically find this board inside:

HP Pavilion All-in-One (AIO) PCs (e.g., 20/22-b000 series)
Compaq Presario All-in-One models
Select HP Slimline desktops from the 2015–2017 era

The “IPM” stands for Industrial PC Mainboard, a naming convention HP uses for its custom Pegatron orders.

Where to get official documentation and drivers

Look for the IPM17-002 product page or the OEM/manufacturer support site for:
- Full user manual with board layout and front-panel pinout.
- BIOS/firmware downloads and release notes.
- Chipset, LAN, audio, and VGA drivers.
- Technical support and contact info.

Where to Find the IPM17-002 Manual

Because HP buries this document, use these specific search strategies:

Use the “Product Number” (P/N) – Look for a sticker near the RAM slots. It will say “P/N: 12345-XXXXX.” Search that exact number.
Check Archive.org – Many users have uploaded the “HP Pavilion 20-b000 Maintenance & Service Guide.” That guide contains the IPM17-002 diagrams.
Third-Party Manual Sites – Proceed with caution. Sites like ManualsLib or ManualsPlus often have scanned copies, but verify the PDF is virus-free.
The Direct HP Approach – Go to HP Support → “Identify my product” → Enter your PC’s serial number (found on the case sticker). Download the Maintenance & Service Guide, not the User Guide.

Safety & handling

Work on a non-conductive surface.
Disconnect power before installing components.
Avoid touching gold contacts and chips.
Use appropriate cooling; do not block ventilation.

Overview

The IPM17-002 is a compact motherboard typically used in embedded systems or industrial PCs. This guide covers common features, connectors, basic setup, BIOS access, common troubleshooting steps, and safety notes to help you get started.

Critical Information Found in the Manual

If you cannot find the physical PDF manual, you can use the information below, which is standard for the IPM17-002 architecture.

1. What is the IPM17-002 Motherboard?

The IPM17-002 is not a retail motherboard you’d buy off a shelf. Instead, it’s an OEM (Original Equipment Manufacturer) board, typically used in budget or mid-range desktops from the early to mid-2010s. Key specifications often include:

Form Factor: Micro-ATX (though sometimes with non-standard mounting holes or power connectors).
CPU Socket: Likely LGA 1155 or LGA 1150, supporting Intel’s 2nd, 3rd, or 4th generation Core processors (e.g., i3, i5, i7).
Chipset: Intel H61, B75, or similar (entry-level to mainstream).
RAM Support: 2 or 4 DDR3 DIMM slots, typically supporting up to 16GB or 32GB.
Expansion Slots: One PCIe x16 for a graphics card, plus one or two PCIe x1 slots.
Storage: SATA 2.0 or 3.0 ports (usually 4), sometimes with a legacy IDE port.

Because it’s proprietary, the board may have non-standard front-panel header pinouts, a unique BIOS, or even a custom power supply connector — making the manual absolutely critical.

Why You Absolutely Need the Official Manual

Using a retail motherboard guide for this board can cause hardware failure. Here is why the specific OEM manual is critical: Because it’s proprietary

Front Panel Header Pins: The power switch, reset, HDD LED, and Power LED pins are not standardized. Guessing the pinout can short the board.
BIOS Recovery: HP/Pegatron BIOS files are unique. The manual contains the exact steps for CMOS recovery and BIOS flashing via USB.
Thermal Specifications: The manual lists specific CPU cooler height limits, which is vital if you are transplanting this board into a new case.
Error Beep Codes: The NVIDIA chipset on this board uses proprietary beep codes that differ from standard AMI or Phoenix BIOS.