点击:4514 回复:1
Finding the right driver for the Jinka JK 1351 is the difference between having a high-performance vinyl cutter and a very expensive paperweight. Because these machines are often rebranded or sold through various distributors, the software setup can be a bit of a puzzle. 1. The Core Driver (The Bridge) The JK 1351 primarily uses a USB-to-Serial CH340 to communicate with your computer. You need a driver that creates a "Virtual COM Port." The Source: Most users find success downloading the
driver. Once installed, your PC will recognize the cutter as a COM port (usually COM3 or COM4) in the Device Manager. 2. Design & Cutting Software
The driver handles the connection, but you need a "brain" to send the designs. The JK 1351 is most compatible with: AnyCut / DragonCut:
Often bundled with the machine; these are the most stable options for calibration and contour cutting. SignMaster:
Widely considered the industry standard for Jinka machines due to its easy port configuration.
An older, budget-friendly software often found in the box, though it can be finicky on Windows 10/11. Inkscape (with Plugin):
For those who prefer open-source, you can use Inkscape with a "Send to Corel" or "Inkcut" extension. 3. Common Setup Pitfalls Baud Rate: In your software settings, ensure the Baud Rate is set to
. If it's off, the machine might start cutting random lines or "gibberish." Flow Control: Set this to
to prevent the machine from freezing halfway through a long cut. USB vs. Serial: jinka jk 1351 driver software
Even if you are using a USB cable, the software usually needs to be told it is a "Serial" connection via the COM port you installed in step one. Summary for Success To get running, install the CH340 driver first, identify your in Device Manager, and then link that port within SignMaster specifically for Windows 11?
For the Jinka JK-1351 cutting plotter, the driver software required depends on your specific model variant (e.g., standard vs. contour cut) and your operating system. 1. Official & Reliable Driver Links
It is highly recommended to use the official Jinka Indonesia Support Page to ensure you are getting the correct version for your hardware: (Standard / Cut Only): Use the Jinka JK/XL Driver for basic vinyl cutting. JK-1351PE/HE (Semi-Auto Contour)
: Requires specific drivers that support laser-eye registration marks. Jinka Indonesia provides dedicated Google Drive links for these specialized models.
USB Connection (FTDI): If your computer does not recognize the plotter when plugged in, you likely need the FTDI USB-to-Serial Driver, which allows the USB port to act as a COM port for the plotter. 2. Compatible Cutting Software
Drivers alone only allow communication; you still need design/cutting software to send jobs to the machine. Common options include:
CorelDRAW Plugins: Many users prefer PlotCalc, which acts as a direct plugin for CorelDRAW to handle Jinka cutting paths.
AnyCut / Artcut: These are often bundled with the machine and include the necessary internal drivers for the JK-1351 series. Finding the right driver for the Jinka JK
SignCut Pro: Often used for more advanced calibration and precise vinyl cutting. 3. Installation Steps
To ensure the "proper text" and settings are applied correctly:
Extract & Run as Admin: Unzip your downloaded driver and right-click setup.exe to Run as administrator. Verify COM Port:
Go to Device Manager > Ports (COM & LPT). Your Jinka should appear as "USB Serial Port (COM#)". Note the number (e.g., COM3).
Software Setup: In your cutting software (Artcut, CorelDRAW, etc.), select Jinka JK-1351
as the device and ensure the COM port matches the one found in Device Manager.
80 x 80 mm or 80mm Roll as paper size.The Jinka JK 1351 is a capable machine held back by software that feels stuck in time.
Recommendation: If you buy this cutter, do not rely solely on the included CD. Immediately check for Windows 10/11 compatible drivers online, or budget for third-party software like Sure Cuts A Lot to ensure a smoother, modern workflow. Once you solve the software puzzle, the JK 1351 proves to be a workhorse that punches above its weight class. For Receipt Paper (80mm x 80mm)
Identify the Device: Ensure that "Jinka JK 1351" is indeed the model number of your device. Sometimes, model numbers are slightly different or have variations (e.g., "Jinka JK-1351").
Manufacturer’s Website: The best place to find drivers is usually the official website of the device's manufacturer. You would look for a "Support," "Downloads," or "Drivers" section.
Driver Update Tools: There are third-party tools and websites that offer driver updates. However, be cautious when using these, as they might bundle additional software or not have the most current drivers.
Operating System Compatibility: Make sure to select a driver that is compatible with your operating system. Installing a driver for a different OS can lead to issues.
Installation: Once you've downloaded the driver, follow the installation instructions provided. This usually involves running an executable file and following on-screen prompts.
The Jinka JK-1351 is a specialized peripheral device (commonly a thermal receipt printer, barcode label printer, or a point-of-sale (POS) interface module). To ensure seamless communication between the JK-1351 hardware and a host operating system (Windows, Linux, or macOS), the correct driver software is essential. The driver acts as a translation layer, converting high-level system commands into low-level instructions the device can execute.
After installation, the driver package typically includes: