Kyocera Fs1120mfp Scanner Driver Windows 10 Fix ⟶ <TOP>
To fix scanner driver issues for the Kyocera FS-1120MFP on Windows 10, the most effective solution is to install the specific TWAIN/WIA driver package directly from the manufacturer
. Standard Windows updates often fail to recognize the scanning component of this multi-function printer, leading to "device not found" errors. Kyocera Document Solutions Europe 1. Download and Install Official Scanner Drivers
Most scanning issues occur because the basic printer driver (KX Driver) does not always include the necessary scanning protocols. KYOCERA Document Solutions America Download Source : Visit the official Kyocera Download Center File Selection : Look for the Scanner driver (TWAIN / WIA)
. As of the latest updates, this is typically a small ZIP file (around 4MB to 20MB depending on the version). Installation Extract the downloaded ZIP folder. file within the folder. Follow the prompts to install both TWAIN and WIA sources. Kyocera Document Solutions Europe 2. Configure the Kyocera Client Tool kyocera fs1120mfp scanner driver windows 10 fix
After driver installation, Windows may still not "see" the scanner until it is configured via the Kyocera utility. Open the Tool : Search your Start menu for Kyocera Client Tool Device Recognition : Ensure your FS-1120MFP is selected in the dropdown menu. Scan Settings : Click on the
tab. Here, you can configure the "Scan to Folder" or "Scan to PDF" destinations. If the tool says "Supported devices are not available," you may need to reinstall the drivers using the original installation CD contents or an updated ISO from Kyocera. 3. Enable Windows Scanning Features
If the scanner is installed but not responding, verify that Windows has the required background services turned on. Start Menu , type "Turn Windows features on or off," and select it. Print and Document Services Windows Fax and Scan Scan Management (if available) are checked. and restart your computer if prompted. 4. Troubleshooting Common Errors To fix scanner driver issues for the Kyocera
Getting the Kyocera FS-1120MFP scanner to work on Windows 10 (and Windows 11) is a common issue because the default "KX Driver" often fails to detect the scanner, or the original CD drivers are outdated.
Here is the step-by-step fix. The solution usually involves using a "TWAIN" driver or a specific utility rather than the standard V4 driver found on Windows Update.
2) Enable WIA and TWAIN support
- Open Services (press Win+R, type services.msc).
- Ensure the following services are set to Automatic and started:
- Windows Image Acquisition (WIA)
- Shell Hardware Detection
- Restart these services after driver install.
If scanning software uses TWAIN:
- Install the TWAIN driver package if provided by Kyocera or included with multifunction software.
- Some older TWAIN drivers may require installing a legacy 32-bit driver on 64-bit Windows; prefer using WIA if available.
Step 4 – Configure Scanner
- Open Kyocera Client Tool from Start Menu.
- Go to Device Settings → Scanner → ensure "TWAIN" is enabled.
- Set Connection → USB or Network (IP address).
Final Resort: Use Virtual Scanner (Workaround)
If absolutely nothing works, scan to email or USB directly from the FS-1120MFP control panel:
- Scan to USB: Insert USB drive into the front port → Press Scan → Select USB.
- Scan to Email: Configure SMTP settings via the printer’s web interface (if on network).
8) Firmware and device reset
- Check Kyocera device firmware version via its web interface or control panel.
- Update firmware only if Kyocera provides a Windows-10 compatible firmware update.
- As last resort, perform a factory reset on the MFP (note: this may erase custom settings).
Best Tools for Kyocera FS-1120MFP:
NAPS2 (Not Another PDF Scanner 2)
- Why it works: NAPS2 uses its own WIA fallback layer. Even when Windows Scan fails, NAPS2 often detects the Kyocera.
- Download: Free from naps2.com.
- Fix: Install > Sources > Add > Select "Kyocera FS-1120MFP" from the WIA list. Ignore any red text.
VueScan (Paid, but Incredible)
- Why it works: VueScan contains a reverse-engineered driver for the Kyocera FS-1120MFP that does not rely on Microsoft’s WIA or TWAIN.
- Cost: ~$40, but has a 30-day free trial.
- Result: You can scan at full hardware resolution on Windows 11/10/8/7.
Twain Util or Scanimage
- For advanced users, these command-line tools can force a Twain handshake that GUI apps cannot.