Lava Benco V90 Ae9120 Flash File S160 Hang Logo New Exclusive -

Lava Benco V90 (AE9120 & S160) flash file is the essential firmware used to resolve software-related issues such as being stuck on the boot logo, constant restarting (boot loops), or a completely dead device

. Below is a comprehensive guide to understanding this firmware and how to use it to fix common system errors. Firmware Details Device Name : Lava Benco V90 Model Number Build Version Processor (CPU) : Unisoc SC9863A Operating System : Android 12 : Fixes "Hang on Logo," boot loops, and software bugs. Issues This Flash File Resolves Hang on Logo

: The phone stays stuck on the "Benco" or "Lava" startup screen and does not enter the home menu. Dead Boot Repair

: Recovery of devices that are unresponsive or cannot power on due to software failure. Fastboot/Recovery Fix

: Repairs situations where the phone is stuck in Fastboot or Recovery modes. System Lag/Errors

: Clears out persistent software glitches that factory resets cannot fix. Required Tools for Flashing To install the Lava Benco V90 AE9120 S160 firmware , you will typically need: SPD Flash Tool (UpgradeDownload/ResearchDownload)

: Since the device uses a Unisoc (SPD) chipset, these are the standard tools for flashing .pac files. USB Drivers lava benco v90 ae9120 flash file s160 hang logo new

: Proper Spreadtrum/Unisoc USB drivers must be installed on your PC for the device to be recognized. Firmware File : The specific S160 build designed for the AE9120 model.

: A reliable USB Type-C cable for a stable connection during the process. Basic Flashing Procedure Download and Extract

: Get the firmware, flash tool, and drivers from a reputable source like Flashfile Bazar Install Drivers

: Ensure the Unisoc drivers are properly installed on your computer. : Open the flashing tool and load the file from the extracted firmware folder. Connect Device

: Power off the phone. Hold the volume buttons (usually Volume Down or both) and connect it to the PC. Start Flash

: Once the tool recognizes the device, click "Start." Wait for the "Passed" or "Success" message. Lava Benco V90 (AE9120 & S160) flash file

: Disconnect and turn on the device. Note that the first boot after flashing may take several minutes. Important Note

: Flashing will erase all data on the device. Always ensure you have a backup if possible, and verify that the firmware version (S160) matches your hardware exactly to avoid permanent damage. verified download links

for the flashing tools and drivers required for this process? Benco V90 technical specifications - GSMchoice.com

It sounds like you’re dealing with a Lava Benco V90 (likely a typo for Lava Z-Series or Benco brand — though Lava and Benco are separate; maybe you meant Lava Z90 or Benco V90?) with a AE9120 board and a hang on logo issue after flashing. The “S160” could be a firmware version or a flash tool error code.

I’ll give you a structured development review — as if for internal engineering or technical support use — covering the problem, analysis, likely root causes, and suggested fixes.

Prerequisites for Flashing

Flashing firmware is a technical process. Ensure you have the following ready: Prerequisites for Flashing Flashing firmware is a technical

Windows PC: The flashing tools generally require a Windows operating system (Windows 7/8/10/11).
USB Data Cable: A quality cable ensures the connection doesn't drop during the process.
Device Drivers: You must install the specific MTK (MediaTek) USB VCOM or Preloader Drivers for the Lava Benco V90 so the computer can recognize the device.
Flash Tool: This device likely uses the SP Flash Tool (Smart Phone Flash Tool) or a proprietary factory tool.
Backup: If your device had important data, note that flashing the S160 firmware will likely wipe user data.

Step-by-Step Guide to Flash Lava Benco V90

Note: The following steps are generic for MTK devices like the Benco V90. Always refer to the specific instructions included with your downloaded firmware file.

Download and Extract: Download the Lava Benco V90 AE9120 S160 Flash File and extract it to a folder on your desktop. Also, extract the SP Flash Tool.
Load the Scatter File:
- Open the SP Flash Tool.
- Click on the "Download" or "Choose" tab (depending on the version).
- Locate and select the Scatter File (usually named MT6765_Android_scatter.txt or similar) inside the extracted firmware folder.
Configure Settings:
- Ensure the "Download Only" option is selected if you only want to fix the hang logo without wiping everything, though "Firmware Upgrade" is recommended for a cleaner fix.
- Crucial: If the device is dead (totally unresponsive), ensure the "Da Download All" or similar option is checked in the tool settings to revive the boot files.
Connect the Device:
- Power off the phone completely.
- Click the "Download" button in the Flash Tool.
- Connect the phone to the PC via USB. You may need to hold Volume Up or Volume Down while connecting to trigger the Preloader.
Flashing Process:
- The tool should detect the device and a progress bar will appear.
- Wait for the process to reach 100%. Do not touch the phone or cable during this time.
Finish:
- Once complete, a green check mark or "Download OK" message will appear.
- Disconnect the phone and long-press the Power button to turn it on.

Part 2: The Flash

He launched SP Flash Tool (version 5.2128), loaded the S160 scatter file, and clicked Download. The yellow progress bar marched smoothly—100% for preloader, md1armp8, bootimg. The phone buzzed, rebooted, and Alex leaned back, expecting the welcome setup screen.

But it didn't come.

Instead, the Benco Labs logo appeared. The little swirling dots under the text swirled for 5 seconds… 10 seconds… then stopped. Frozen. Solid. Like a screenshot.

The new S160 flash had turned a bootloop into a hard hang on the logo.

Preparations

Charge the phone to at least 50%.
Install MediaTek (MTK) VCOM drivers:
- Disable driver signature enforcement on Windows if required.
- Install VCOM drivers matching your OS (32/64-bit).
Download and extract SP Flash Tool to a folder.
Obtain the correct firmware package for model AE9120 (S160). Ensure the package includes:
- scatter.txt (MTK scatter file)
- preloader, boot, recovery, system, userdata, etc.
Create a folder on PC and place extracted firmware and scatter file there.

Post-flash steps

If boot gets past logo, perform initial setup.
If still stuck, try wiping cache and factory reset from Recovery (volume + power combo) if accessible.
If you flashed with "Download Only" and issues persist, consider repeating with "Firmware Upgrade".

5. Tools Required for Flashing Lava Benco V90 AE9120

To flash the S160 firmware and resolve the hang logo, you’ll need:

How to confirm chipset: Open the phone – look for MT6761 (MediaTek) or SC9863A (Unisoc). The S160 hang logo flash file exists for both variants.