Lcie 13 Atex 3069 X !!link!!
The LCIE 13 ATEX 3069 X certification applies to explosion-proof sensors used in hazardous, industrial environments, specifically identified as McQuay chiller spare parts. The 'X' designation highlights specific conditions for safe use regarding installation and operation. For more details on the product, you can view a vendor listing for the sensor on MTG PERF BVS 13 ATEX G 001 X N8 en
The story of LCIE 13 ATEX 3069 X is one of industrial safety and the rigorous engineering required to operate in dangerous environments. While it sounds like a cryptic serial number, it is actually a vital "passport" for specialized hardware—specifically the SAFA T EX KArowana explosion-proof floodlight—allowing it to safely illuminate hazardous sites like oil refineries and chemical plants. The Origins of the Code
The "story" begins with the Laboratoire Central des Industries Électriques (LCIE), a French certification body under Bureau Veritas. In 2013, they evaluated a piece of lighting equipment designed for "potentially explosive atmospheres"—places where a single spark could cause a catastrophe.
The resulting certificate number, LCIE 13 ATEX 3069 X, breaks down as follows: LCIE: The certifying laboratory. 13: The year of issue (2013).
ATEX: Stands for Appareils destinés à être utilisés en ATmosphères EXplosibles (Equipment for Explosive Atmospheres), a strict EU safety directive.
3069: The unique sequential identification number for this specific device.
X: A critical warning. It signals that there are "Special Conditions for Safe Use". The Hero: The KArowana Floodlight
The product protected by this certificate is often the KArowana series of explosion-proof LED floodlights. These lights are built like tanks, using "flameproof" (Ex d) or "increased safety" (Ex e) housing to ensure that even if an internal component shorts out or explodes, the fire is contained within the lamp and cannot ignite the surrounding gas or dust.
The string "LCIE 13 ATEX 3069 X" refers to a specific ATEX (Explosive Atmospheres) certification number issued by LCIE Bureau Veritas , a French notified body for explosion protection The certificate number can be broken down as follows:
: The certifying body (Laboratoire Central des Industries Électriques). : The year the certification was issued (2013).
: Indicates compliance with European Union directives for equipment used in potentially explosive atmospheres. lcie 13 atex 3069 x
: The unique registration number assigned to the specific product or series.
: Indicates "Special Conditions for Safe Use." This means the equipment has specific installation or operating requirements that must be followed to maintain its safety rating (e.g., specific temperature limits or wiring methods). Measure Monitor Control Related Product Examples
While multiple products can share similar certification prefixes, this specific certification is commonly associated with industrial sensors or electrical components designed for hazardous areas. For instance, similar certifications from the same year and body are often linked to: Pressure Transmitters (e.g., specific models from manufacturers like Solenoid Valves Position Sensors
To find the exact technical manual or "text" of this certificate, you would typically need to check the nameplate of the physical device or the manufacturer's website under their "Downloads" "ATEX Certifications" installation requirements for a specific device, or do you have the brand name of the equipment? ATEX Certification - CSA Group
The marking “LCIE 13 ATEX 3069 X” refers to an ATEX equipment certificate issued for a product intended for use in potentially explosive atmospheres. Here’s what each part means:
- LCIE – The Laboratoire Central des Industries Électriques (French certification body), which issued the certificate. LCIE is a notified body for ATEX and IECEx.
- 13 – The year of issue (2013).
- ATEX – Indicates compliance with EU Directive 2014/34/EU (equipment for explosive atmospheres).
- 3069 – A unique reference number assigned by LCIE to that specific certificate.
- X – Special conditions for safe use. The “X” means the equipment has specific installation, use, or maintenance conditions described in the certificate (e.g., particular environmental limits, use with certain protective devices, or restrictions on repair).
Key practical implications:
- This marking alone does not give full hazardous area classification (e.g., gas group, temperature class, EPL). You must refer to the certificate’s annex and the product’s nameplate for specific zone, gas group (IIA, IIB, IIC), temperature class (T1–T6), and ambient range.
- The “X” may relate to e.g.:
- Use only with a specific cable gland or conduit.
- Limitation on minimum/maximum ambient temperature.
- Electrostatic discharge precautions.
- Use only with a certified back-up fuse or power supply.
To find the full features:
Search using the complete certificate number “LCIE 13 ATEX 3069 X” along with the manufacturer’s name or product type. The certificate will list the actual equipment model(s), gas/dust groups, temperature class, IP rating, and the specific “X” conditions.
"LCIE 13 ATEX 3069 X" refers to an ATEX certification issued by the Laboratoire Central des Industries Électriques (LCIE) in 2013 for explosion-proof equipment. Specifically, this certificate (and its common 2012 predecessor, LCIE 12 ATEX 3069X) is associated with high-performance LED floodlights used in hazardous industrial environments chin power
If you are looking to "develop a feature" based on this certification, you are likely working with the Arowana series of explosion-proof lights manufactured by Shenzhen KHJ Semiconductor Lighting Key Features for Development
Based on the technical specifications of the certified hardware, here are the primary features you can leverage or develop for: Explosion-Proof Safety (Ex d / Ex tb) The LCIE 13 ATEX 3069 X certification applies
: The device is designed to contain internal explosions (flameproof "d") and prevent dust ignition ("tb"), making it suitable for Zone 1 & 2 Zone 21 & 22 Extreme Durability (IP66 & Impact Resistance)
: The hardware features a die-cast aluminum alloy enclosure and tempered glass that can withstand 7J impacts
, suitable for heavy-duty marine, oil, and gas applications. Adaptive Photometrics : The Arowana series offers a wide 117.8° beam angle
and high efficacy (~140 lm/W), allowing for wide-area illumination with low energy consumption. Environmental Resilience : Rated for operation in temperatures ranging from -40°C to +55°C
, which is a critical feature for monitoring or control systems in extreme climates. chin power Potential Use Cases Smart Lighting Integration
: Develop a feature to integrate these lights into a centralized control system using their 100-240 VAC power versatility. Monitoring Systems
The LCIE 13 ATEX 3069 X certificate designates a specific piece of equipment certified for use in potentially explosive atmospheres under the ATEX Directive. This certification is issued by the Laboratoire Central des Industries Électriques (LCIE), a notified body (number 0081) responsible for verifying that products meet essential health and safety requirements in the European Union. Core Technical Details
The certificate number LCIE 13 ATEX 3069 X can be broken down to understand its origins: LCIE: The certifying body. 13: The year of original issue (2013). ATEX: Compliance with the ATEX Directive 2014/34/EU.
3069: The unique sequential number for this specific certificate.
X: Indicates "Special Conditions for Safe Use." This means the product has specific requirements—such as temperature limits or installation methods—that must be followed to maintain its explosion-proof rating. Equipment Purpose and Application LCIE – The Laboratoire Central des Industries Électriques
While specific technical parameters vary by device, certificates in this series often apply to industrial components like cable glands, junction boxes, or distribution boards designed for hazardous area installations.
Materials: Typically constructed from high-durability materials like Polyamide 6 or stainless steel to withstand harsh industrial environments.
Protection Types: These devices are designed to prevent ignition through methods such as Intrinsic Safety (Ex i), which limits electrical energy, or Increased Safety (Ex e), which enhances terminal security.
Environmental Ratings: Certified products often feature high IP ratings (Ingress Protection) to remain gas-tight and watertight in volatile zones. Compliance and Safety Standards
The LCIE 13 ATEX 3069 X certificate ensures the product meets European standards such as EN 60079-0 (General requirements) and EN 60079-7 (Increased safety). This is critical for industries like oil and gas, petrochemicals, and manufacturing, where dust or gas might create an explosive hazard.
Operators must always refer to the original certificate and user manual to verify the exact "X" conditions, as non-compliance can invalidate the safety rating of the entire installation.
Based on the text provided, "LCIE 13 ATEX 3069 X" is not a title of a story or editorial piece; it is a specific certification number found on industrial equipment.
Here is an "article" (explanation) regarding what this code means and why it is important.
c) Maintenance
- Only open housing in non-hazardous area or with gas/dust clearance certificate
- Replace seals if disturbed
- Use manufacturer-specified spare parts only
Decoding the Code: What is LCIE 13 ATEX 3069 X?
If you have encountered the code LCIE 13 ATEX 3069 X on a piece of machinery, you are likely looking at a piece of equipment designed for use in hazardous environments. This string of characters is an EC-Type Examination Certificate number. It certifies that the equipment meets the strict safety standards of the European Union for use in explosive atmospheres.
Here is a breakdown of what each part of the code signifies:
4. 3069 – The Unique Serial Number
3069 is the unique reference number assigned by LCIE to this specific certificate. Every certificate issued by LCIE has a distinct number. This number ties back to a technical file containing:
- Drawings
- Material specifications
- Results of temperature and pressure tests
- List of critical components.
