« Blog

Litefire Laser Engraver Software [portable] Download -

Complete Guide: Litefire Laser Engraver Software Download and Setup

If you have recently purchased a budget-friendly laser engraver—particularly models branded as Neje, Eqqufix, or generic DAC-enabled USB lasers—you have likely been directed to download Litefire (often stylized as LiteFire or formerly known as Benbox).

Litefire is a lightweight, proprietary software used to control the movement of the laser, manage power settings, and process images for engraving. Because these machines often do not come with extensive printed manuals, finding the correct software and drivers can be a challenge.

This guide covers where to download the software, how to install the necessary drivers, and a basic overview of getting your first project running. Litefire Laser Engraver Software Download

1. Where to Download Litefire Software

Unlike mainstream software, Litefire is rarely hosted on a dedicated, polished website. It is typically distributed by the manufacturers of the laser kits. Here are the safest ways to download it:

The Short Answer

Do not download random "Universal Laser Driver" software from third-party sites. Always use the official source. LightBurn (Recommended) LaserGRBL (Free alternative)

You have two primary options for controlling your Litefire:

  1. LightBurn (Recommended)
  2. LaserGRBL (Free alternative)

Litefire machines run on GRBL firmware. They do not use proprietary "Litefire Studio" software. Instead, the manufacturer partners with industry-standard tools. Note: LightBurn is paid software

1. Official Manufacturer Links (If Known)

If your machine is branded (e.g., AG, HT, or a specific model like the AG-50), check the manufacturer's support page.

How to Download LightBurn for Litefire

  1. Go to the official LightBurn website (lightburnsoftware.com). Never download LightBurn from a third-party "crack" site—these often contain malware.
  2. Navigate to the “Download” section.
  3. Select your operating system:
    • Windows 10/11 (64-bit recommended)
    • macOS (Intel or Apple Silicon)
    • Linux (Ubuntu/Debian)
  4. Download the installer (e.g., LightBurn-windows64.exe).
  5. Crucial Step: After installation, you need the Litefire device profile. Go to LightBurn’s “Devices” tab, click “Import Device Profile,” and select the preset for “GRBL” or “Litefire Diode.” If unavailable, manually set:
    • X Axis Max: 400mm
    • Y Axis Max: 400mm
    • S-Value Max: 1000

Note: LightBurn is paid software, but it offers a 30-day free trial. Litefire users should use this trial to verify compatibility before purchasing a license ($60-$120 depending on features).

3. Initial Setup & Configuration

When you open Litefire for the first time, it will not work immediately. You must tell it which port to listen to.

  1. Connect the Machine: Ensure your laser engraver is powered on and connected via USB.
  2. Select the Port: In the Litefire interface, look for a dropdown menu labeled "Port". Click it. If your drivers are installed correctly, you will see an option like COM3 or COM4. Select it.
  3. Select Baud Rate: Usually, these machines operate at 115200. Ensure this number is selected in the software.
  4. Connect: Click the "Connect" button (sometimes represented by a plug icon). If successful, the status bar should turn green or display "Connected."
« Blog