Skip to content
Support
Zero Downtime
iLok
iLok License Manager
Buy

Mxq Amlogic S805 Android 511 Lollipop Download Install __full__ May 2026

Upgrading an MXQ Amlogic S805 Android 5.1.1 Lollipop is a popular way to extend the life of older hardware, though it is typically achieved using unofficial firmwares originally designed for similar devices like the Minix Neo X6 Pre-Installation Requirements Amlogic USB Burning Tool

: Version 2.0.5 or 2.0.8 is often required, as newer versions may not properly recognize the S805 processor. MicroSD Card : Formatted to TWRP Recovery : A compatible recovery image (renamed to recovery.img ) to facilitate the installation. : Used to press the reset button hidden inside the Installation Steps (SD Card Method) mxq amlogic s805 android 511 lollipop download install

⚠️ IMPORTANT WARNING:
Flashing the wrong firmware can permanently brick your TV box. This guide is based on generic MXQ S805 hardware. Verify your device’s PCB board markings (e.g., “MXQ V3.1”, “S805 V1.2”) before proceeding. Upgrading an MXQ Amlogic S805 Android 5

Step 4: Connect and Flash (USB Burning Tool Method)

  1. Open the Amlogic USB Burning Tool on your PC.
  2. Click on File -> Import Image.
  3. Select the downloaded Android 5.1.1 .img firmware file. The tool will verify the image.
  4. Connect the USB Cable: While still holding the reset button with the toothpick, plug the Male-to-Male USB cable into the PC and into one of the USB ports on the MXQ box.
  5. Wait for the device to be detected by the tool. You should see a "Connected" status in the bottom left or a change in the device info on screen. Once connected, you can release the toothpick.
  6. Click the Start button on the top right of the tool.
  7. The progress bar will turn blue. Do not unplug the device or power off the PC during this process.
  8. Once the progress reaches 100%, you will see a "Burning Successfully" message. Click Stop and then close the program.

Step 2: Install the USB Burning Tool

  1. Extract the downloaded USB Burning Tool archive (usually a .zip or .rar file).
  2. Locate the Setup.exe file inside and run it.
  3. Follow the on-screen prompts to install the software on your PC.
  4. Driver Installation: In the installation folder, look for a folder named Driver. Connect your MXQ box to your PC via USB and point the driver installation to this folder if Windows does not automatically recognize the device.

5. First Boot & Post-Installation

Alternative Method: SD Card (Recovery Update)

If you cannot find a Male-to-Male USB cable or if the USB method fails, you can try the SD Card method. ⚠️ IMPORTANT WARNING: Flashing the wrong firmware can

  1. Download a tool called Amlogic SD Card Maker.
  2. Format your MicroSD card.
  3. Open the SD Card Maker, select your SD card drive, and select "Write to SD" (this sometimes requires you to rename your firmware file to aml_sdc_burn.IMG or update.img depending on the tool version).
  4. Insert the SD card into the powered-off MXQ box.
  5. Hold the reset button (toothpick in AV port) while plugging in the power cable.
  6. Keep holding reset until you see the Android robot animation on the screen. The box will install the firmware automatically and reboot.