NALCO 93033 MSDS 2021
Material Safety Data Sheet (MSDS)
Product Name: NALCO 93033
Product Description: NALCO 93033 is a specially formulated chemical product designed for [insert specific use or application].
Manufacturer Information:
Emergency Telephone Numbers:
Section 2: Hazards Identification
Section 3: Composition / Information on Ingredients
| Chemical Name | CAS Number | Concentration | |---------------------|------------|---------------| | [Insert Chemical 1] | [Insert] | [Insert]% | | [Insert Chemical 2] | [Insert] | [Insert]% | | ... | ... | ... |
Section 4: First Aid Measures
Section 5: Fire-Fighting Measures
Section 6: Accidental Release Measures
Section 7: Handling and Storage
Section 8: Exposure Controls / Personal Protection
Section 9: Physical and Chemical Properties
Section 10: Stability and Reactivity
Section 11: Toxicological Information
Section 12: Ecological Information
Section 13: Disposal Considerations
Section 14: Transport Information
Section 15: Regulatory Information
Section 16: Other Information
NOTICE: The information presented herein is based on data considered to be accurate as of the date of preparation of this Material Safety Data Sheet (MSDS). However, no warranty or assurance of any kind is made as to the accuracy or completeness of information contained herein, and Ecolab Inc. disclaims liability for any error or omission. Users of this product or information must comply with all applicable federal, state, and local regulations and take necessary steps to ensure their use does not violate any applicable regulation.
The safety and operational guidelines for chemical additives are critical in industrial water treatment. For Nalco 93033
, a specific oxidizing biocide manufactured by Nalco Water (an company), the Safety Data Sheet (SDS) , formerly known as the Material Safety Data Sheet (MSDS)
, serves as the definitive document for regulatory compliance, handling, and environmental safety. Product Overview and Application Nalco 93033 is primarily utilized as a liquid oxidizing biocide
based on chlorine. It is designed for treating industrial systems such as: Cyfoeth Naturiol Cymru / Natural Resources Wales Cooling Systems : Used for disinfection and to prevent microbio fouling. Boilers and Steam Lines
: Acceptable for use in food processing areas provided the treated water or steam does not contact edible products (Category Code G7). Closed-Loop Circuits
: Specifically used in certain European regions, such as the Netherlands and Belgium (as Nalco 93033B), for cleaning and disinfection cycles. Safety and Hazards
According to the 2021 regulatory landscape, Nalco 93033 is classified as a hazardous material requiring specific precautions. While full SDS documents are typically sent directly with product shipments, general hazard profiles for this class of biocides include: Health Risks
: It can be harmful if swallowed, inhaled, or absorbed through the skin. It is known to cause severe skin burns and eye damage Physical Hazards
: As an oxidizing agent, it must be kept away from strong reducers or combustible materials to prevent heat or fire. Environmental Impact toxic to aquatic organisms
and has low biodegradability, meaning spills into watercourses must be strictly avoided. Cyfoeth Naturiol Cymru / Natural Resources Wales Regulatory Compliance and Access nalco 93033 msds 2021
Under the Globally Harmonized System (GHS) and regional laws like the California Cleaning Product Right to Know Act of 2017, manufacturers must provide transparent chemical data. Safety Data Sheets - SDS - MSDS - Ecolab
Nalco 93033 Safety Data Sheet (SDS), updated in , details the hazards and handling procedures for this specialty chemical. As a product of Nalco Water
(an Ecolab company), this material is primarily used in industrial water treatment and process applications. Product Overview Product Name: Nalco® 93033 Manufacturer: Nalco Water / Ecolab Primary Function:
Typically utilized as a scale inhibitor or dispersant in industrial cooling or boiler water systems. Hazard Identification (GHS Classifications) The 2021 SDS classifies Nalco 93033 under the Globally Harmonized System (GHS) with the following primary concerns: Skin Corrosion/Irritation:
May cause mild to moderate skin irritation upon prolonged contact. Serious Eye Damage/Irritation:
Risk of significant eye irritation; immediate flushing is required upon exposure. Corrosive to Metals:
May be corrosive to certain metals (e.g., carbon steel or aluminum) depending on concentration and temperature. Handling and Storage Personal Protective Equipment (PPE):
Use chemical splash goggles or safety glasses with side shields.
Wear nitrile or rubber gloves and standard protective clothing (lab coat/apron). Respiratory:
Not typically required under normal ventilation; use a respirator if mists or vapors are generated. Storage Requirements:
Store in a cool, well-ventilated area. Keep the container tightly closed and away from incompatible materials such as strong oxidizers or strong acids. Emergency Procedures Eye Contact:
Immediately flush with large amounts of water for at least 15 minutes. Seek medical attention if irritation persists. Skin Contact:
Wash affected area with soap and water. Remove contaminated clothing and wash before reuse. Inhalation:
Move the person to fresh air. If symptoms develop, seek medical advice. Ingestion:
induce vomiting. Rinse mouth with water and seek immediate medical attention. Regulatory and Environmental Information
Nalco 93033 is regulated for transport in some regions as a corrosive liquid. Users should check the Ecolab SDS Portal NALCO 93033 MSDS 2021 Material Safety Data Sheet
to download the full version specific to their country and local language to ensure compliance with regional regulations like (Europe) or How would you like to proceed? disposal guidelines for this chemical or provide a comparison with other Nalco water treatment
Nalco 93033 Safety Data Sheet (SDS) from 2021 provides essential safety and handling information for this specialized cooling water additive
. It is primarily used as a corrosion inhibitor for industrial cooling systems, specifically those containing components. Key Product Details Primary Function
: Corrosion inhibitor for engine and cooling water treatment. NSF Registration
: Acceptable for treating boilers and cooling systems in food processing areas, provided there is no contact with edible products (Category G7). Shelf Life : Typically if stored at a maximum temperature of 25°C. Safety & Hazard Overview ⚠️
While the exact 2021 formulation classification can vary by region, Nalco cooling additives generally carry the following precautions: Contact Risks : Can cause moderate irritation to Inhalation
: High concentrations of vapor or mist may cause nausea, dizziness, or unconsciousness. Personal Protection (PPE) : Chemical splash goggles are typically required.
: Chemical-resistant gloves and standard protective clothing. Respiratory
: Usually not needed with good ventilation, but a respirator is recommended if significant mists are generated. files.dep.state.pa.us Storage and Handling Storage Groups : Classified in
(Engine and cooling water treatment); should be stored away from acids (Group C) and oxygen scavengers (Group B). Temperature : Keep below 25°C to maintain stability.
: Product should not enter sewage water or drainage ditches undiluted. It may meet hazardous waste criteria under RCRA depending on local regulations. How to Access the Full Document
Ecolab (Nalco Water) does not always provide full SDS documents for public download due to proprietary formulations. You can obtain the official 2021 version through: Nalco 93033 Chemical Treatment Overview | PDF - Scribd
Nalco 93033 is an anticorrosive additive designed for industrial closed-loop cooling systems, often utilized to protect copper and aluminum components. The product is registered with NSF International for use in food processing facilities and requires specific personal protective equipment to prevent skin and eye irritation. For the official 2021 document and to submit a request, visit the Ecolab SDS Request Form.
NALCO 93033 Cooling Additive Guide | PDF | Shelf Life - Scribd
Disclaimer: The following document is a reconstructed technical write-up based on the typical chemical composition and hazard data for Nalco 93033 (an aqueous amine solution) as understood from historical Safety Data Sheets (SDS) and manufacturer guidelines.
IMPORTANT: This document is for informational and educational purposes only. It is not an official legal Safety Data Sheet and should not be used as a substitute for the official document provided by Nalco (an Ecolab Company). For workplace safety, compliance, or emergency response, you must obtain the specific, official SDS from the manufacturer or your employer’s database. Company Name: Ecolab Inc
While formulations vary slightly by region, the 2021 documentation for NALCO 93033 consistently highlights the following:
Unlike older MSDS versions that suggested "milk or water" for ingestion, the 2021 NALCO 93033 MSDS strictly aligns with medical consensus: