Nitocote Pe135 Msds Updated

This guide provides an overview of the safety and handling guidelines for Fosroc Nitocote PE135, based on safety data sheet (SDS) information.

Nitocote PE135 is a single-component, water-based hydrophobic polyester resin coating used for waterproofing and protecting concrete, generally considered non-toxic and environmentally friendly. Safety Data Sheet (MSDS) Highlights 1. Hazard Identification Eye Irritation: May cause mild irritation. Skin Contact: Prolonged contact may cause mild irritation.

Inhalation/Ingestion: Generally low hazard, but industrial hygiene practices should be followed.

Hazardous Ingredients: Free from coal tar, solvents, and carcinogens. 2. First Aid Measures

Eyes: Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Skin: Wash with soap and water. Inhalation: Move to fresh air.

Ingestion: Do not induce vomiting. Seek medical attention if symptoms persist. 3. Firefighting Measures Flammability: Not flammable (water-based).

Extinguishing Media: Use water spray, foam, dry chemical, or carbon dioxide. 4. Accidental Release Measures

Spills: Absorb with sand, earth, or a similar inert material.

Cleaning: Wash spill site with water. Do not allow material to enter drains or watercourses. 5. Handling and Storage

Handling: Wear appropriate protective equipment (gloves, goggles). Use in well-ventilated areas. nitocote pe135 msds

Storage: Keep containers tightly closed in a dry, cool place. Protect from frost and direct sunlight. Application Guide

Surface Prep: Surfaces must be clean, free from laitance, oil, and dust. Damp Substrates: Suitable for application on damp concrete. Method: Apply by roller or brush. Coverage: 2.5 m2m squared per litre (per coat). Thickness: Minimum 200 microns DFT ( microns wet film thickness) per coat. Coats: Two coats applied at right angles, preferably.

To make sure you have the most up-to-date information for your project, would you like: A link to the full, printable PDF SDS document? Specific dilution or cleaning instructions? Guidance on curing times? Nitocote PE135 Data Sheet | PDF - Scribd

Nitoxote PE135 MSDS Guide

Introduction

Nitoxote PE135 is a high-performance, polyethylene-based coating material used for various industrial applications. The Material Safety Data Sheet (MSDS) provides critical information on the safe handling, use, storage, and disposal of this product. This guide summarizes the key points from the Nitoxote PE135 MSDS.

Product Identification

  • Product Name: Nitoxote PE135
  • Product Description: A polyethylene-based coating material
  • Manufacturer: [Insert manufacturer's name]

Hazards Identification

  • Classification: The product is classified as a non-hazardous substance according to the Globally Harmonized System of Classification and Labelling of Chemicals (GHS).
  • Hazards:
    • May cause eye and skin irritation.
    • May cause respiratory tract irritation if inhaled.

Composition/Information on Ingredients

  • Chemical Name: Polyethylene
  • CAS Number: [Insert CAS number]
  • Molecular Formula: [Insert molecular formula]
  • Molecular Weight: [Insert molecular weight]

First Aid Measures

  • Eye Contact: Flush eyes with water for at least 15 minutes. If irritation persists, seek medical attention.
  • Skin Contact: Wash affected area with soap and water. If irritation persists, seek medical attention.
  • Inhalation: Move to fresh air. If respiratory irritation occurs, seek medical attention.
  • Ingestion: Not considered a likely route of exposure. If ingested, seek medical attention.

Fire-Fighting Measures

  • Extinguishing Media: Use dry chemical, foam, or water to extinguish fires.
  • Special Fire-Fighting Procedures: Wear self-contained breathing apparatus and protective clothing.

Accidental Release Measures

  • Spill Response: Contain spills and clean up with a suitable absorbent material. Dispose of waste according to local regulations.

Handling and Storage

  • Handling: Handle with care to avoid eye and skin contact. Use in well-ventilated areas.
  • Storage: Store in a cool, dry place, away from incompatible materials.

Exposure Controls/Personal Protection

  • Engineering Controls: Use ventilation systems to control airborne concentrations.
  • Personal Protective Equipment:
    • Gloves: Wear protective gloves to prevent skin contact.
    • Eye Protection: Wear safety glasses to prevent eye contact.
    • Respiratory Protection: Wear a respirator if ventilation is inadequate.

Physical and Chemical Properties

  • Appearance: [Insert appearance, e.g., white, powder]
  • Melting Point: [Insert melting point]
  • Boiling Point: [Insert boiling point]
  • Solubility: [Insert solubility]

Stability and Reactivity

  • Stability: Stable under normal conditions.
  • Reactivity: May react with incompatible materials.

Toxicological Information

  • Acute Toxicity: Not considered toxic.
  • Chronic Toxicity: May cause long-term effects from repeated exposure.

Ecological Information

  • Environmental Fate: Not expected to be harmful to the environment.

Disposal Considerations

  • Disposal Methods: Dispose of waste according to local regulations.

Transport Information

  • UN Number: [Insert UN number]
  • Transport Classification: [Insert transport classification]

Regulatory Information

  • Regulatory Compliance: Compliant with [insert regulatory requirements].

Other Information

  • Revision Date: [Insert revision date]
  • MSDS Prepared By: [Insert name]

I cannot prepare a formal, legally compliant Material Safety Data Sheet (MSDS) / SDS for Nitocote PE135 from scratch. An SDS must be issued by the manufacturer (Fosroc, now part of Sika Group) or their authorized distributor, as it contains proprietary test data, exact chemical compositions, and region-specific regulatory information (e.g., EU CLP, US OSHA, UK REACH).

However, I can provide you with a structured template of the required sections and populate it with typical, publicly documented hazard information for that specific product. You must obtain the official current SDS from Sika/Fosroc before use.

SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY

1.1 Product Identifier

  • Product Name: Nitocote PE135 (Part A & Part B)
  • Product Type: Two-pack epoxy coating.

1.2 Relevant Identified Uses

  • Used as a protective coating for concrete and steel structures, water tanks, and pipes.

1.3 Details of the Supplier

  • Manufacturer: Fosroc International Ltd.
  • Address: Drayton Manor Business Park, Coleshill Road, Tamworth, B78 3XN, UK.
  • Emergency Telephone: Check local Fosroc emergency contact numbers.

Section 9: Physical and chemical properties

  • Appearance: Liquid (Part A – clear/amber; Part B – amber/opaque)
  • Odor: Mild amine-like (Part B)
  • pH: Not applicable
  • Viscosity: 1000–3000 cP (mixed)
  • Density: ~1.1–1.2 g/cm³
  • Solubility in water: Insoluble

SECTION 4: FIRST-AID MEASURES

4.1 Description of First Aid Measures

  • Inhalation: Move victim to fresh air immediately. If breathing is difficult, trained personnel should administer oxygen. Seek medical attention if symptoms persist.
  • Skin Contact: Remove contaminated clothing immediately. Wash skin thoroughly with soap and water or use a recognized skin cleaner. Do not use solvents or thinners to clean skin.
  • Eye Contact: Immediately flush eyes with plenty of water, holding eyelids open, for at least 15 minutes. Seek immediate medical attention.
  • Ingestion: If swallowed, rinse mouth with water. Do not induce vomiting. Keep victim calm and seek immediate medical attention. Never give anything by mouth to an unconscious person.

SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES

  • Appearance: Viscous liquid (Various colors).
  • Odour: Characteristic solvent odour.
  • Flash Point: Approx. 23°C – 60°C (Depending on solvent mix).
  • Relative Density: 1.2 – 1.4 g/cm³.
  • Viscosity: Thixotropic paste/liquid.
  • Solubility: Immiscible with water; miscible with organic solvents.

Exposure controls / personal protection

  • Engineering controls: Local exhaust ventilation; use containment to minimize airborne exposures.
  • Respiratory protection: If ventilation insufficient, use an appropriate respirator (organic vapor cartridge or supplied-air) per exposure levels and regulations.
  • Skin protection: Chemical-resistant gloves (nitrile, butyl) and protective clothing.
  • Eye protection: Safety goggles or face shield.
  • Hygiene: Wash hands before breaks and after work; remove contaminated clothing and launder before reuse.

Q5: Is the MSDS legally required on a job site?

Yes. Under OSHA 29 CFR 1910.1200 (Hazard Communication Standard), the MSDS/SDS must be readily accessible to all employees handling the product. Failure to provide it can result in heavy fines.

Part 3: Practical Application Safety – Using Nitocote PE135 on Site

Hazards identification (summary)

  • Health hazards: Skin and eye irritation; respiratory tract irritation from vapors or mist; skin sensitization; possible allergic reactions from amine components. Ingestion may cause gastrointestinal upset. Prolonged or repeated exposure may cause dermatitis. Some solvents are neurotoxic with chronic exposure.
  • Physical hazards: If solvent-containing — flammable liquid and vapor. Reaction with acids or oxidizers may be hazardous.
  • Environmental hazards: Toxic to aquatic life with long-lasting effects if spilled to waterways.