To connect your Nokia 130 (RM-1035) to a computer for data transfer or firmware flashing, you need the specific MediaTek (MTK) USB drivers. This device uses a MediaTek chipset, which requires different drivers than typical Android or Lumia devices. 🛠️ Step 1: Download the Correct Driver
You generally need one of two types of drivers depending on your goal:
MTK USB All Driver: Best for general connectivity, data transfer, and basic repairs.
Nokia MTK Flash Drivers (CDC/VCOM): Required if you are using tools like Infinity BEST, Miracle Box, or SP Flash Tool to fix a "dead" or "hanging" phone.
Official Recovery Tool: The Nokia Software Recovery Tool often includes these drivers automatically. 💻 Step 2: Install Drivers on Windows 10/11
Modern Windows versions require you to disable Driver Signature Enforcement because these older MTK drivers are often not digitally signed. Enter Advanced Startup: Hold the Shift key and click Restart in the Start Menu.
Navigate to Troubleshoot > Advanced options > Startup Settings > Restart. Disable Enforcement:
Once the PC restarts, press 7 or F7 to select "Disable driver signature enforcement." Run Installer:
Open your downloaded driver folder and run the Install.bat or Setup.exe.
If prompted with a red warning box, click "Install this driver software anyway". 🔌 Step 3: Connect Your Nokia 130
The method of connection changes based on what you want to do: For Data Transfer (SD Card)
Insert a microSD card: The phone will only show "Charging" if no card is present.
Use USB 2.0: Connecting to a blue USB 3.0/3.1 port often causes connection failures.
Select Mode: Once plugged in, select "Data Storage" on the phone screen. For Flashing/Repair (Phone is OFF) Remove Battery: Take out the battery and put it back in.
Hold Boot Key: Usually, you do not need to hold a key, but if it's not detected, try holding the Middle/OK key while plugging in the USB cable.
Check Device Manager: It should briefly appear as "MTK USB Port" or "Nokia USB Serial Port" under the "Ports (COM & LPT)" section.
Nokia 130 (RM-1035) USB driver is a vital utility for users needing to maintain or repair this specific feature phone. It is primarily used for flashing firmware
and solving software-related issues rather than standard file transfers. Key Features & Performance Purpose-Driven Functionality
: Unlike standard smartphones, these drivers are specifically designed for "flashing" (installing or updating the operating system) and are required for tools like Nokia Care Suite Infinity Best Miracle Box MTK Chipset Support
: Since the RM-1035 uses a MediaTek (MTK) chipset, the driver allows a PC to communicate with the phone’s serial port for deep system repairs, such as fixing "Contact Service" errors or blinking keypad lights. Compatibility
: Drivers are available for various Windows versions, including Windows XP Critical Considerations Complex Installation on Modern OS
: On Windows 10 and 11, the installation is not "plug-and-play." You must manually disable Driver Signature Enforcement
in the advanced startup menu to install these unsigned drivers. USB 3.0 Compatibility Issues
: Users have reported that the Nokia 130 often fails to connect properly to USB 3.0 (blue) ports, only showing a "Charging" status. For the driver to work and for the "Data Storage" menu to appear, it is highly recommended to use a USB 2.0 port MicroSD Requirement nokia 130 rm1035 usb driver
: For basic data storage features (if not flashing), the phone requires an inserted MicroSD card to be recognized as a drive. Microsoft Learn Common Solutions the Driver Facilitates "Contact Service" Fix
: Flashing the phone using this driver can resolve the common "Contact Service" error that occurs after failed formatting attempts. Firmware Updates
: Allows users to update the RM-1035 to the latest version (e.g., v14.00.11) via flashing tools. Device Recognition
: Resolves the "Unknown Device" error in Windows Device Manager when the phone is connected in its "Boot" or "Flash" mode. Summary Verdict : The driver is indispensable for technical repairs and firmware management, but it is not user-friendly
Nokia 130 (RM-1035) USB driver is primarily used for MediaTek (MTK) chipset communication
, enabling tasks like flashing firmware, repairing "blinking" issues, or performing data transfers . Because the
is an older feature phone, its drivers often require specific manual installation steps on modern operating systems like Windows 10 and 11 Key Driver Features & Details Chipset Compatibility : Specifically designed for MTK (MediaTek) Hardware IDs : Common identifiers for this model include USB\VID_0421&PID_069A USB\VID_0421&PID_06FB Primary Functions Firmware Flashing : Essential for tools like Miracle Box Infinity Best to write new software to the device. Service & Repair
: Used to fix software-related "blink" solutions and keypad light issues. Connectivity : Enables the device to be recognized as a USB Composite Device for data interaction. OS Support
: Compatible with Windows XP, Vista, 7, 8, 8.1, and 10 (both 32-bit and 64-bit). Installation & Availability
There is no single official modern download page, but drivers can be obtained through several reliable methods:
Connecting a Nokia 130 (RM-1035) to a PC typically requires specific drivers depending on whether you are transferring data or performing maintenance like flashing firmware . Essential Drivers for Nokia 130 RM-1035
Nokia Connectivity Cable Driver: This is the standard utility for establishing a physical connection via USB cable between older Nokia devices and Windows PCs .
Nokia USB Serial Port Driver: Used for general communication and often required for the computer to recognize the phone's COM port during specialized tasks .
MTK USB Drivers: Since the RM-1035 uses a MediaTek (MTK) chipset, specific MTK VCOM or CDC drivers are necessary for flashing stock firmware or fixing software-related issues . Common Connection Use-Cases
Data Transfer (Mass Storage):To copy photos or music, insert a microSD card into your phone . Connect it to your PC with a compatible USB cable and select Mass storage on the phone screen . No advanced drivers are usually needed as it should appear as a removable drive in Windows Explorer .
Firmware Flashing & Repair:If the device is unresponsive or needs a software reset, tools like the Nokia Software Recovery Tool or specialized flashing software (e.g., Infinity-Best) are used . These require the MTK Preloader or VCOM drivers to be correctly installed . Installation Tips for Windows 10/11
For modern systems (Windows 10/11), you may need to disable Driver Signature Enforcement to install older Nokia or MTK drivers : Nokia 130 (2023) USB Driver for Windows
Finding the correct Nokia 130 (RM-1035) USB driver is essential for flashing firmware, transferring data, or using the device as a modem. This guide provides a comprehensive walkthrough for downloading and installing the necessary drivers on Windows. Understanding the Nokia 130 (RM-1035) Connection
The RM-1035 is a classic dual-SIM feature phone. Unlike smartphones, it requires specific Connectivity Cable Drivers to be recognized by PC suites or flashing tools like Nokia Best (BB5 Easy Service Tool) or Miracle Box. 📥 Download Links for Nokia 130 RM-1035 Drivers
To ensure a stable connection, you typically need two types of drivers: 1. Nokia Connectivity Cable Driver
This is the standard driver for Windows to recognize the phone via USB. Version: v7.1.182 (Latest) OS Support: Windows 7, 8, 10, 11 (32-bit & 64-bit) 2. MTK (MediaTek) USB VCOM Drivers
The Nokia 130 runs on a MediaTek chipset. If you are trying to "unbrick" or flash the phone, you must install these to enable the Preloader port. 🛠️ How to Install Nokia 130 USB Drivers Method 1: Automatic Installation (Recommended) Download the Nokia Connectivity Cable Driver setup file.
Right-click the installer and select "Run as Administrator." Follow the on-screen prompts and click Finish. Restart your computer to initialize the registry changes. Method 2: Manual Installation (For Flashing Tools) To connect your Nokia 130 (RM-1035) to a
If your PC sees the device as "Unknown Device" in Device Manager: Open Device Manager (Win + X > Device Manager). Connect your Nokia 130 to the PC using a micro-USB cable. Right-click the Unknown Device or MT6xx entry. Select Update Driver > Browse my computer for drivers.
Point to the folder where you extracted the MTK VCOM drivers. Click Install anyway if a Windows Security warning appears. ⚠️ Troubleshooting Connection Issues
If the RM-1035 is still not detected, try these quick fixes:
Check the Cable: Use a high-quality data sync cable; some cables are "charge-only."
USB Port: Avoid using USB hubs. Plug directly into the motherboard ports (back of the PC).
Driver Signature Enforcement: On Windows 10 and 11, you may need to disable "Driver Signature Enforcement" to install older MediaTek drivers.
Clean the Port: Feature phones often collect lint in the charging port, preventing a solid data connection. 🚀 Use Cases for the RM-1035 Driver Firmware Updating: Use with Nokia Software Recovery Tool. Flashing: Repairing "Contact Service" errors or boot loops.
Data Backup: Extracting contacts or messages via specialized software.
💡 Pro Tip: Always take a backup of your phone data before attempting to flash new firmware, as this process will wipe the device memory. If you'd like, I can help you find: The official firmware files for the RM-1035 A guide on how to remove a forgotten security code
The latest version of flashing tools compatible with this model
To connect your Nokia 130 (RM-1035) to a PC for data transfer or firmware flashing, you generally need the Nokia Connectivity USB Driver. Since this is a legacy device (released in 2014), modern Windows versions may require manual installation or "Compatibility Mode." 1. Download the Driver
You can find the compatible drivers on community-driven archives or technical support sites, as official Nokia/Microsoft support for this model has largely ended.
Nokia Connectivity USB Driver (v7.1.182 or later): This is the standard driver package for older Nokia Series 30+ devices.
MediaTek (MTK) USB VCOM Drivers: Required if you are using tools like "Nokia Software Recovery Tool" or "MobiMB" for firmware tasks, as the RM-1035 uses a MediaTek chipset. 2. Installation Steps
Extract files: If the driver is in a .zip or .7z format, extract it to a folder on your desktop.
Run as Administrator: Right-click the setup.exe or install.exe and select Run as Administrator.
Compatibility Settings: If using Windows 10 or 11, right-click the installer, go to Properties > Compatibility, and select Windows 7 before running.
Restart PC: Always reboot after installation to ensure the driver registry entries are active. 3. Connecting the Device
Cable: Use a standard Micro-USB data cable (ensure it is a data cable, not just a charging cable).
Phone Mode: When you plug the phone into the PC, it may ask you to select a mode. Choose "Mass Storage" for transferring files to an SD card or "Modem/Data" for sync software. 4. Manual Driver Update (If Not Detected) If the PC shows an "Unknown Device" in Device Manager: Right-click the Start button and select Device Manager.
Find the item with a yellow exclamation mark (usually under "Other devices"). Right-click it and choose Update driver.
Select "Browse my computer for drivers" and point it to the folder where you extracted the Nokia drivers.
Pro Tip: If you are trying to move music or photos, the simplest way is to insert a microSD card (up to 32GB) into the phone and use a cheap USB card reader instead of a direct cable connection. Option 1: Official Nokia Connectivity Driver This is
Are you trying to transfer files like music and photos, or are you trying to flash the firmware to fix a software issue?
Nokia 130 Dual SIM | Specifications and User Reviews - Tech in Deep
To download and install the Nokia 130 (RM-1035) USB driver, you typically need the MediaTek (MTK) chipset drivers, as this model is built on that platform. Driver Details & Compatibility
The RM-1035 hardware ID is generally identified as USB\VID_0421&PID_069A, which corresponds to a Nokia USB Connectivity device.
Primary Driver Type: MediaTek (MTK) USB VCOM or CDC Drivers.
Operating Systems: Windows 7, 8, 10, and 11 (both 32-bit and 64-bit).
Use Cases: Flashing firmware, fixing "Contact Service" errors, or resetting security codes using tools like Infinity-Best or Nokia Care Suite. How to Install the Driver
To successfully connect your Nokia 130 (RM-1035) to a PC for data transfer or flashing, you must install the correct MTK (MediaTek) USB drivers
. This specific model uses a MediaTek chipset, meaning standard smartphone drivers often won't work without manual configuration, especially on newer operating systems like Windows 10 or 11 Core Driver Components MediaTek (MTK) VCOM Drivers
: Essential for flashing firmware or "reviving" a dead device using tools like Miracle Box Nokia Care Suite Nokia Connectivity Cable Driver
: The standard driver required for basic file management and synchronisation via Nokia PC Suite USB Composite Device Driver
: Automatically identified by Windows but often requires a manual update to match the hardware ID ( VID_0421&PID_069A Installation Guide for Windows 10/11 Modern Windows versions strictly enforce driver signature enforcement
, which can block these older Nokia drivers. Follow these steps to bypass this:
Nokia 130 Music (2025) - Leading Mobile Phone Distribution Company
The Nokia 130 (RM-1035) is a classic feature phone that requires specific USB drivers to connect to a Windows PC for tasks like data transfer, firmware flashing, or using recovery tools. Because this device uses a MediaTek (MTK) chipset, standard generic drivers often fail to recognize it properly. Driver Types for Nokia 130 RM-1035
Depending on your goal, you may need one or more of the following driver types:
Connectivity Cable Drivers: The most common drivers used for general data transfer and syncing with Nokia PC Suite .
MTK USB VCOM Drivers: Essential for "flashing" or installing stock firmware using tools like InfinityBox BEST or SP Flash Tool.
ADB Drivers: Required if you are attempting to interface with the device's software via command-line tools. Download Links and Compatibility Driver Name Compatibility Source Link Nokia Connectivity Cable Driver (v7.1) Windows XP, Vista, 7, 8, 10 Uptodown Nokia 130 (2023/Legacy) USB Driver Windows 7, 8, 10, 11 (32/64-bit) NokiaDriver.com MediaTek (MTK) USB VCOM Driver Windows 10, 11 (64-bit) Official OEM Drivers How to Install Nokia 130 USB Drivers Method 1: Automatic Installation (Recommended)
Download the Nokia Connectivity Cable Driver setup file (usually an .exe or .msi). Disconnect your phone from the computer before starting. Run the installer and follow the on-screen prompts. Restart your computer after the installation is complete. Connect your Nokia 130 via a high-quality micro-USB cable. Method 2: Manual Installation (for Flashing/VCOM)
If the phone appears as an "Unknown Device" in Device Manager, follow these steps: Nokia 130 (2023) USB Driver for Windows
This is the standard driver package released by Nokia.
Due to Microsoft's acquisition of Nokia’s mobile division and subsequent discontinuation of support, finding official drivers can be challenging. Below are the most reliable sources.
The Nokia 130 (model number RM-1035) is a classic feature phone launched in 2014, known for its extreme battery life, durability, and basic multimedia capabilities. While modern smartphones rely heavily on USB drivers for data transfer and debugging, the Nokia 130’s driver needs are more specialized. This article provides a comprehensive look at the USB driver for the Nokia 130 RM-1035, explaining when it’s needed, how to install it correctly, and how to resolve common issues.