⚠ Max 100 URLs per request to avoid misuse. Need more? just contact us - no extra charge.
The Nokia 150 (TA-1235), a popular feature phone released in 2020, occasionally encounters software-related issues such as "hang on logo," white screen, or forgotten security codes. Professional technicians often use the Infinity-Box [BEST] (NK2) or Infinity [CM2] tools to resolve these issues via flashing. Prerequisites for Flashing
To perform a successful flash, ensure you have the following:
Hardware: An Infinity-Box or CM2 Dongle with an active support license.
Software: The latest version of the Infinity-Box [BEST] NK2 software installed on your PC.
Drivers: Proper MTK (MediaTek) drivers installed to ensure the PC recognizes the device when connected.
Flash File: The correct firmware (Flash File) specific to TA-1235, which can be found in the Infinity-Box Support Area. Step-by-Step Guide Using Infinity-Box Launch Software: Open the Infinity-Box [BEST] NK2 tool.
Select Model: Under the "Model" dropdown menu, search for and select TA-1235.
Load Flash Files: In the flashing tab, load the required firmware files (usually .bin or structured flash files provided in the firmware package).
Prepare Device: Power off the phone and remove the battery to ensure it is completely shut down. Reinsert the battery after a few seconds.
Start Flashing: Click the Flash or Flash Factory button in the software.
Connect Phone: Connect the phone to your PC using a high-quality USB cable. You may need to hold a "boot key" (often the center button or '*' key) while connecting to trigger the download mode.
Monitor Progress: The software will detect the device and begin writing the firmware. Do not disconnect the cable until the process is marked as "Done" or "Successfully Finished". Troubleshooting & Common Fixes
is the model number for the Nokia 150 (2020) dual-SIM phone. To flash this device using Infinity BEST (BB5 Easy Service Tool)
, you need the specific firmware files and the Infinity-Box hardware or activation. Flash File Details Nokia 150 (2020) MediaTek (MTK) File Purpose: nokia ta-1235 flash file infinity
Fixing hang on logo, dead boot repair, or removing security codes. How to Obtain the Flash File Official Support: Authorized users can download firmware directly from the Infinity-Box Support Area using their dongle credentials. Product Code Method:
You can use the Infinity BEST tool itself to download flash files by entering the device's specific product code (found on the sticker under the battery). infinity-box.com Flashing Procedure with Infinity BEST Launch the Infinity BEST software on your PC. Select the tab (as the uses a MediaTek chipset).
Load the appropriate flash files (Scatter or Binary) into the software. Power off the phone and remove the battery. Write Firmware button in the tool.
Connect the phone to the PC via USB while holding the boot key (usually the 'Go to' or Center key, or simply connecting it while it's off).
Wait for the process to complete until the "Flash Done" message appears.
Flashing can erase all user data. For simple passcode issues, the tool can often perform a "One Click Format" or code reset without a full re-flash. Are you attempting to repair a dead boot remove a security lock
Flashing the Nokia 150 (2020) model TA-1235 with the Infinity-Box (specifically using the CM2 tool or Infinity Best) is a common solution for resolving software issues such as "hang on logo," white screen, dead boot, or forgotten security locks. 1. Prerequisites for Flashing
Before starting, ensure you have the following ready to prevent errors during the process:
Infinity-Box Dongle: You must have the Infinity-Box hardware and the corresponding software installed (Infinity Best or CM2MTK).
Correct Flash File: Use the specific firmware for TA-1235. Using the wrong file can result in a dead device.
USB Drivers: Install the MediaTek (MTK) USB Drivers on your PC so the tool can communicate with the phone's chipset.
Battery Level: Ensure the battery is charged to at least 50% to prevent it from dying mid-flash.
Quality USB Cable: Use a high-quality micro-USB cable for a stable connection. 2. Software & Firmware Details The Nokia 150 (TA-1235) , a popular feature
The Nokia 150 TA-1235 is a feature phone built on the MediaTek chipset and runs on the Series 30+ operating system. Model Number: TA-1235 (Dual SIM). Processor: MediaTek. Storage: 4MB RAM / 4MB Internal Storage. 3. How to Flash Nokia TA-1235 with Infinity Best/CM2 Follow these steps to restore or unlock your device:
Open the Tool: Launch the Infinity Best or CM2MTK software on your computer.
Select Model: In the tool interface, select the correct model category (Nokia) and the specific model TA-1235.
Load Firmware: Click on the "Flash" or "Firmware" tab. Select the downloaded Nokia TA-1235 flash file (usually a .bin or .pac file depending on the tool version).
Initiate Flash: Click the "Write Flash" or "Flash Factory" button. Connect the Phone:
Turn off the phone and remove the battery once to reset the state. Reinsert the battery.
Hold the "Boot Key" (usually the center OK button or Dial button) and connect the USB cable to the PC.
Flashing Process: The tool will detect the device and start writing the software. Wait for the "Flashing Done" or "Success" message before disconnecting. 4. Troubleshooting Common Issues Nokia 150 TA- 1235 CYAN Dual Sim - TD Africa
Nokia 150 (TA-1235) is a 2020 edition feature phone frequently serviced for software issues like "white screen," keypad light blinking, or being completely "dead". For technicians, Infinity-Box Chinese Miracle-2 (CM2)
is the industry-standard tool for flashing these devices to restore factory functionality Understanding the Nokia TA-1235
The TA-1235 is the Dual-SIM variant of the Nokia 150 (2020). Unlike older Nokia models, this device typically requires specific MTK (MediaTek) drivers and firmware files to be serviced correctly through professional tools. Essential Requirements for Flashing
To successfully flash a Nokia TA-1235, you need the following specialized components: Flash File: The specific firmware (ROM) designed for the TA-1235 model. Infinity-Box CM2 Dongle:
A hardware security key required to run the Chinese Miracle-2 software. CM2 MTK Module: Understanding the Hardware: Nokia TA-1235
The specific software interface within the Infinity suite used for MediaTek-based phones. MediaTek (MTK) USB Drivers: Ensure your PC recognizes the device in "Boot Mode". Good Quality USB Cable:
To prevent connection drops during the critical writing process. Step-by-Step Flashing Guide with Infinity CM2
Technicians typically follow these steps to repair a "dead" or hanging TA-1235: Preparation:
module on your PC. Ensure your Infinity Dongle is active and updated via the Dongle Manager File Selection: tab in the CM2 software.
Select the appropriate CPU or model (Nokia 150 / TA-1235) from the dropdown menu. Scatter file or official Nokia flash file package into the tool. Initiating the Process: button in the tool. The software will display "Waiting for phone...". Connecting the Device: Power off the Nokia TA-1235 completely.
Remove and re-insert the battery (ensure it has at least 50% charge).
Hold the "Boot Key" (usually the center OK button or the '*' key, depending on the specific firmware version) and connect the USB cable. Completion:
Once the software detects the phone, it will begin writing the firmware. Do not disconnect until you see a "Done" or "Operation Finished" message. Common Fixes via Flashing
Flashing the TA-1235 with the correct Infinity file can resolve several common hardware-like symptoms that are actually software-based: Riba Mundo Tecnologia
Unlike older Nokia phones, the TA-1235 uses Secure Boot and Download Agent Authentication. Infinity Box comes with AutoDA (Authentication) features to bypass this.
Before touching the phone, configure your tool.
To proceed with the repair, you need the following files installed on your PC: