Onkyo Rc-799m Remote Manual Info

To program your Onkyo RC-799M Go to product viewer dialog for this item.

remote or troubleshoot issues, follow the steps below derived from official function guides and setup manuals. Programming Instructions You can program the Go to product viewer dialog for this item. to control external devices like TVs or DVD players.

Enter Program Mode: Press and hold the REMOTE MODE button you want to program (e.g., TV, BD/DVD) and the DISPLAY button simultaneously for about 3 seconds until the indicator light stays on .

Enter Code: Within 30 seconds, use the number buttons to enter the 5-digit remote control code for your device's brand .

Confirm Success: If the code is accepted, the REMOTE MODE button will flash twice . If it flashes once slowly, the code was not successful, and you should try again or use a different code .

Note: The RECEIVER and ZONE 2 buttons cannot be programmed with external device codes . Common Remote Codes Sharp TV: 10818

MHL-enabled devices: 33101 (North America) or 32910 (Europe/Asia) Troubleshooting & Resets If your remote is unresponsive, try these steps:

Remote Reset: Press and hold the RECEIVER and HOME buttons until the indicator light comes on to reset the remote's internal settings .

Power Discharge: Remove the batteries and hold the Power button for 20 seconds to clear residual power before reinserting fresh AAA batteries .

Remote ID Check: If the remote still won't control the receiver, ensure the Remote ID on your receiver (found in Setup > Hardware) matches the remote's ID (typically set to ID 1) . Key Button Functions Q/Setup: Accesses advanced settings menus on your TV .

Home/Audio: Switches to the home menu or media playback controls .

Dimmer: Adjusts the brightness of the receiver's front display .

For a full list of brand-specific codes or to download the complete PDF, refer to the Onkyo RC-799M Function Guide or the Onkyo Remote Code Instruction manual.

The Onkyo RC-799M is a dedicated audio-video receiver remote primarily used for controlling Onkyo and Integra receivers like the TX-SR309 or HT-R391. It typically requires no programming to work with its original receiver right out of the box. Quick Setup & Programming

If you need to program the remote to control external devices (like a TV or DVD player), use the following steps: Assigning Device Codes: onkyo rc-799m remote manual

Simultaneously press and hold the REMOTE MODE button (e.g., BD/DVD, CBL/SAT) and the DISPLAY button for about 3 seconds until the button stays lit.

Within 30 seconds, enter the 5-digit remote control code for your device using the number pad. If successful, the REMOTE MODE button will flash twice.

TV Programming: To specifically link your TV's power, hold the TV and DISPLAY buttons until the red light illuminates, then enter your TV's brand code. Direct Code Examples:

Common codes for Onkyo receivers include 30135, 30380, 30842, and 31298. Key Button Functions

Receiver/Main Power: Turns the main receiver unit on or into standby.

Input Selectors: Buttons below the power key (DVD, VCR, CBL) change the audio/video source.

Listening Modes: Press Movie/TV, Music, or Game repeatedly to cycle through sound profiles.

Navigation: Use the Cursor (Arrows) and ENTER buttons to navigate on-screen setup menus.

Audio Levels: Press the Right Arrow during playback for quick access to Bass, Treble, and Subwoofer levels. Maintenance & Troubleshooting

Onkyo RC-799M Remote Control (part number 24140799) is a standard infrared controller designed for a variety of Onkyo AV receivers, including models like the TX-SR313, HT-RC330, and HT-S3500

. It is widely used to manage home theater setups by controlling both the primary receiver and connected peripheral devices like TVs and cable boxes. Programming Your RC-799M Remote

To use the RC-799M with other devices, you must assign the correct 5-digit manufacturer code to the corresponding REMOTE MODE Enter Program Mode : Press and hold the desired REMOTE MODE

button (e.g., TV, BD/DVD, CBL/SAT) while simultaneously holding down the button for approximately 3 seconds. Wait for Indicator

: The Remote Indicator (or the button itself) should light up or flash to show it is ready for input. Input the Code To program your Onkyo RC-799M Go to product

: Within 30 seconds, enter the 5-digit remote control code for your device using the number buttons. Confirm Success

: If the code is accepted, the REMOTE MODE button will flash twice. Test the Device : Point the remote at the device and press the button to verify it responds.

Note: The [RECEIVER] and [ZONE 2] buttons are pre-programmed for the Onkyo system and cannot be assigned other device codes. Essential Functions and Operations

The RC-799M features a logical layout designed for tactile feedback and quick navigation. AliExpress Basic Manual - Onkyo

The Onkyo RC-799M is a dedicated remote controller designed for specific Onkyo AV receivers, such as the HT-R391, TX-SR309, and HT-RC330. Most versions of this remote work "out of the box" for these receivers and do not require complex programming unless you are attempting to control external components like a TV or DVD player. Quick Setup & Programming

Initial Setup: Insert two 1.5V AA alkaline batteries. Point the remote directly at the receiver's sensor within a range of about 16 feet (5 meters). Programming for External Components:

Hold down the REMOTE MODE button (e.g., TV, DVD) you wish to program while simultaneously holding the DISPLAY button for about 3 seconds. Wait for the REMOTE MODE button to light up.

Enter the 5-digit code for your device using the number keypad within 30 seconds.

If the code is accepted, the REMOTE MODE button will flash twice.

Resetting the Remote: To clear custom codes and return to factory settings, hold down the specific REMOTE MODE button and the L NIGHT button simultaneously for 3 seconds until the mode button flashes twice. Core Button Functions Remote Control Codes - Onkyo - YUMPU

Onkyo RC-799M Remote Manual Report

Introduction

The Onkyo RC-799M is a remote control designed to work with various Onkyo home theater systems and audio components. This report aims to provide a comprehensive overview of the remote's features, functions, and operations.

Remote Control Layout

The Onkyo RC-799M remote control has a standard layout with a sleek and ergonomic design. The remote has a total of 55 buttons, which are divided into several sections:

  1. Top Section: Power button, Input selector buttons (e.g., BD, DVD, GAME, etc.)
  2. Navigation Section: Arrow buttons (up, down, left, right), OK button, and Menu button
  3. Playback Section: Play, Pause, Stop, Fast Forward, and Fast Reverse buttons
  4. Audio Control Section: Volume up and down buttons, Mute button, and Audio button
  5. Function Section: Button for accessing the receiver's setup menu, sleep button, and others

Key Features and Functions

Some notable features and functions of the Onkyo RC-799M remote control include:

  1. Input Source Selection: The remote allows users to select from various input sources, such as BD, DVD, GAME, TV, and more.
  2. Playback Control: Users can control playback of media using the play, pause, stop, fast forward, and fast reverse buttons.
  3. Volume Control: The remote provides volume up and down buttons, as well as a mute button to quickly silence the audio.
  4. On-Screen Menu Access: The remote has a menu button that allows users to access the on-screen menu of their Onkyo device.
  5. Sleep Function: The remote has a sleep button that allows users to set a timer to turn off the device after a specified period.

Setup and Configuration

To use the Onkyo RC-799M remote control, users need to configure it to work with their Onkyo device. This typically involves:

  1. Battery Installation: Installing batteries into the remote control.
  2. Device Code Selection: Selecting the correct device code for the Onkyo device being controlled.
  3. IR Code Learning: Some Onkyo devices may require learning IR codes from the device itself.

Troubleshooting

If the remote control is not functioning properly, users can try:

  1. Battery Replacement: Replacing the batteries with fresh ones.
  2. Device Code Verification: Verifying that the correct device code is being used.
  3. IR Code Re-Learning: Re-learning the IR codes from the device.

Conclusion

The Onkyo RC-799M remote control is designed to provide users with a convenient and intuitive way to control their Onkyo home theater systems and audio components. With its standard layout and range of features, the remote control offers a comprehensive control solution for Onkyo device owners.

Recommendations

  • For optimal performance, ensure that the remote control is used within range of the Onkyo device.
  • Regularly replace batteries to prevent weak signal transmission.
  • Consult the user manual or Onkyo's support resources if issues arise with remote control functionality.

Limitations and Future Improvements

  • Some users may find the remote control's layout and button placement not ergonomic or user-friendly.
  • Future improvements could include the addition of backlighting to the remote control for easier use in low-light environments.

References

  • Onkyo RC-799M Remote Control User Manual
  • Onkyo Support Website

This report provides a comprehensive overview of the Onkyo RC-799M remote control, covering its features, functions, setup, and troubleshooting.

Method B: Direct Learning (Use the other device's original remote)

  1. Point the RC-799M and the original remote at each other (2 inches apart).
  2. Press and hold the RC-799M's mode button (e.g., CBL/SAT) for 3 seconds. LED blinks twice.
  3. Press the RC-799M button you want to teach (e.g., Volume Up).
  4. Press and hold the original remote's Volume Up button until the RC-799M's LED blinks twice.
  5. Repeat for every button you need.

C. Mode Selection

  • Device Modes: The remote operates in different modes (AMP, TV, DVD, etc.). The manual explains how to switch modes to control the appropriate device.
  • Light Button: Instructions on using the backlight function for visibility in darkened home theater environments.

Problem 2: I want to reset the remote to factory settings.

  • Fix: This erases all programmed and learned buttons.
    1. Press and hold Receiver and Enter simultaneously (LED blinks twice).
    2. Press 1 three times (1-1-1).
    3. The LED will blink four times. The remote is now factory fresh.

Onkyo RC-799M Remote Control: A Complete Guide

The Onkyo RC-799M is the original equipment manufacturer (OEM) remote control supplied with select Onkyo home theater receivers and amplifiers, primarily from the late 2000s to early 2010s. It is most commonly paired with models like the Onkyo TX-SR606, TX-SR576, TX-SR506, and HT-R560 home-theater-in-a-box systems. Top Section : Power button, Input selector buttons (e

While no longer in production, the RC-799M remains a highly functional, pre-programmed universal remote that can control up to 6 different devices (TV, DVD/Blu-ray, CD, VCR, Cable/Satellite, and the Onkyo receiver itself).