Safety Data Sheet For W5 Thick Bleach ((hot)) «99% Deluxe»

The following Safety Data Sheet (SDS) details for W5 Thick Bleach

(typically sold at Lidl) are based on manufacturer and standard chemical safety profiles for thickened sodium hypochlorite solutions. 1. Product Identification Product Name W5 Thick Bleach Intended Use

: Disinfectant and cleaning agent for toilets, drains, and hard surfaces : Typically supplied through

retail locations; technical datasheets are often managed by manufacturers like PrimeSource BB Foodservice 2. Hazard Identification Physical Hazards : May be corrosive to metals (Category 1). Health Hazards Skin Corrosion : Causes severe skin burns (Category 1C). Eye Damage : Causes serious eye damage (Category 1). Environmental Hazards : Very toxic to aquatic life with long-lasting effects. Chemical Hazards : Contact with acids liberates toxic chlorine gas 3. Composition & Ingredients Sodium Hypochlorite

: Active bleaching and disinfecting agent (typically ~5% active chlorine). Sodium Hydroxide

: Used to stabilize the solution and maintain alkalinity (pH 13-14). Surfactants

: Provide the "thickened" viscous property for better surface adhesion. 4. First Aid Measures Inhalation

: Move the person to fresh air immediately. Seek medical attention if breathing is affected. Skin Contact

: Take off all contaminated clothing immediately. Rinse skin with plenty of water or shower for at least 15 minutes. Seek medical advice. Eye Contact

: Rinse cautiously with water for at least 15 minutes, holding eyelids apart. Remove contact lenses if present. Immediately call a doctor : Rinse mouth with water. Do NOT induce vomiting . Immediately call a Poison Center or doctor. 5. Handling & Storage SAFETY DATA SHEET 5L SUPER THICKENED BLEACH

DRAFT POST: SAFETY DATA SHEET FOR W5 THICK BLEACH

SECTION 1: IDENTIFICATION

  • Product Identifier: W5 Thick Bleach
  • Product Code: [Insert product code]
  • Supplier: [Insert supplier name]
  • Address: [Insert supplier address]
  • Telephone: [Insert telephone number]
  • Fax: [Insert fax number]
  • Email: [Insert email]

SECTION 2: HAZARDS IDENTIFICATION

  • GHS Classification:
    • Corrosive to metals (Category 1)
    • Skin corrosion/irritation (Category 1C)
    • Eye irritation (Category 2A)
    • Respiratory tract irritation (Category 3)
  • Signal Word: DANGER
  • Hazard Statements:
    • H290: May be corrosive to metals.
    • H314: Causes severe skin burns and eye damage.
    • H335: May cause respiratory irritation.

SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS

  • Chemical Name: Sodium hypochlorite solution
  • Synonyms: Bleach, sodium hypochlorite
  • CAS Number: [Insert CAS number]
  • EC Number: [Insert EC number]
  • Composition:
    • Sodium hypochlorite (NaOCl): 3-6%
    • Sodium hydroxide (NaOH): 1-3%
    • Water: 91-96%

SECTION 4: FIRST AID MEASURES

  • General Advice: Move out of dangerous area. Consult a physician. Show this safety data sheet to the doctor in attendance.
  • Inhalation: Move to fresh air. If breathing is difficult, call a physician.
  • Skin Contact: Wash off with plenty of water. Wear protective gloves/protective clothing. Immediately call a physician.
  • Eye Contact: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Call a physician.
  • Ingestion: Do not induce vomiting. Drink plenty of water. Call a physician.

SECTION 5: FIREFIGHTING MEASURES

  • Extinguishing Media: Use water spray, dry chemical, foam, or carbon dioxide to extinguish fires.
  • Special Firefighting Procedures: Wear self-contained breathing apparatus and protective clothing.
  • Combustion Products: Toxic fumes may be released in a fire.

SECTION 6: ACCIDENTAL RELEASE MEASURES

  • Personal Precautions: Wear protective gloves/protective clothing. Ensure adequate ventilation.
  • Environmental Precautions: Do not release into the environment.
  • Methods and Material for Containment and Cleaning Up: Absorb with vermiculite, dry sand, or earth.

SECTION 7: HANDLING AND STORAGE

  • Handling: Handle with care. Avoid contact with skin and eye. Use in well-ventilated area.
  • Storage: Store in a cool, dry place. Keep away from incompatible materials.

SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION

  • Exposure Limits:
    • OSHA PEL: [Insert OSHA PEL]
    • ACGIH TLV: [Insert ACGIH TLV]
  • Engineering Controls: Ensure adequate ventilation.
  • Personal Protective Equipment:
    • Gloves: Wear protective gloves.
    • Protective Clothing: Wear protective clothing.
    • Eye Protection: Wear eye protection.

SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES

  • Appearance: Liquid
  • Color: Clear
  • Odor: Pungent
  • pH: [Insert pH]
  • Melting Point: [Insert melting point]
  • Boiling Point: [Insert boiling point]
  • Density: [Insert density]

SECTION 10: STABILITY AND REACTIVITY

  • Reactivity: Reacts with acids, metals, and organic materials.
  • Stability: Stable under normal conditions.

SECTION 11: TOXICOLOGICAL INFORMATION

  • Toxicity: Toxic if ingested, inhaled, or comes into contact with skin.

SECTION 12: ECOLOGICAL INFORMATION

  • Toxicity to Fish: Toxic to aquatic life.
  • Biodegradability: Not readily biodegradable.

SECTION 13: DISPOSAL CONSIDERATIONS

  • Disposal: Dispose of in accordance with local regulations.

SECTION 14: TRANSPORT INFORMATION

  • UN Number: [Insert UN number]
  • Proper Shipping Name: [Insert proper shipping name]
  • Hazard Class: [Insert hazard class]

SECTION 15: REGULATORY INFORMATION

  • OSHA: [Insert OSHA information]
  • EPA: [Insert EPA information]

SECTION 16: OTHER INFORMATION

  • Training Advice: Read the Safety Data Sheet before handling the product.
  • Revision Date: [Insert revision date]

Disclaimer: The information provided in this Safety Data Sheet is based on our current knowledge and is intended to provide general information on our product. It should not be considered as a guarantee of specific properties or suitability for a particular application. Users should make their own investigations into the suitability of the information for their particular purposes.

The W5 Thick Bleach Safety Data Sheet (SDS) identifies the product as a hazardous chemical primarily composed of sodium hypochlorite and sodium hydroxide. Under EU REACH regulations, it is classified as corrosive and environmentally hazardous. Core Safety Profile

Hazards: It causes severe skin burns, serious eye damage, and is very toxic to aquatic life with long-lasting effects. It is also corrosive to metals.

Reactivity Warning: Never mix bleach with acids or other cleaning agents, as this liberates dangerous toxic chlorine gas.

Physical State: A pale yellow, thick liquid with a characteristic chlorine odor and a highly alkaline pH of 13–14. Safe Handling & PPE

To ensure safety during use, the following measures are recommended:

Hand Protection: Wear protective gloves (e.g., rubber or nitrile).

Eye Protection: Use safety glasses or goggles to prevent splashes. safety data sheet for w5 thick bleach

Ventilation: Always use in well-ventilated areas to avoid inhaling vapors.

Storage: Store in its original container in a cool, dry, and well-ventilated place between 5°C and 25°C, away from light and acidic materials. First Aid Measures Use household chemicals safely - Canada.ca

W5 Thick Bleach is a cleaning product commonly found at Lidl. Like most thick bleaches, it contains Sodium Hypochlorite (typically 2.5–5% active chlorine) and Sodium Hydroxide. Safety Data Sheet (SDS) Highlights

The following safety information is standard for thick bleach formulations similar to W5: SAFETY DATA SHEET Thick Bleach - Knighton Janitorial

Understanding the Safety Data Sheet (SDS) for W5 Thick Bleach is essential for anyone using this powerful cleaning agent in a household or professional setting. While the specific branded product is commonly found in retailers like Lidl, the chemical composition follows strict regulatory standards.

This guide breaks down the critical safety information you need to handle, store, and dispose of W5 Thick Bleach responsibly. 1. Product Identification and Chemical Hazards

W5 Thick Bleach is a sodium hypochlorite-based solution. It is designed to disinfect surfaces and remove tough stains, but its chemical potency requires careful handling. Primary Ingredient: Sodium Hypochlorite (typically <5%).

Secondary Components: Non-ionic surfactants (for cleaning) and perfume.

Classification: Corrosive and hazardous to the aquatic environment. 2. Hazard Identification

The SDS categorizes this product primarily as a corrosive agent. It can cause severe damage if not respected.

Skin Contact: Can cause severe skin burns and permanent scarring.

Eye Contact: Risk of serious eye damage or permanent blindness.

Inhalation: Vapors may irritate the respiratory system, causing coughing or shortness of breath.

Chemical Reactions: Mixing bleach with other cleaners (especially acids or ammonia) releases toxic chlorine gas, which can be fatal in enclosed spaces. 3. Essential First Aid Measures

If an accident occurs, speed is the most important factor in preventing long-term injury.

If Swallowed: Do NOT induce vomiting. Rinse the mouth with water and seek immediate medical attention.

If in Eyes: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing and call a poison center. The following Safety Data Sheet (SDS) details for

If on Skin: Remove contaminated clothing immediately. Rinse skin with plenty of water or shower.

If Inhaled: Move the person to fresh air and keep them in a position comfortable for breathing. 4. Safe Handling and Storage

Proper storage prevents leaks and accidental exposure, especially for children and pets. 🛡️ Handling Tips Always wear protective gloves (nitrile or rubber).

Ensure the room is well-ventilated by opening windows or doors. Avoid splashing when pouring to protect your eyes and face. 📦 Storage Requirements Store upright in the original container. Keep in a cool, dry place away from direct sunlight.

Crucial: Store in a locked cupboard or out of reach of children.

Keep away from acids, detergents, and metals to prevent chemical reactions. 5. Environmental and Disposal Considerations

Bleach is highly toxic to fish and aquatic life. It should never be poured into storm drains or natural water bodies.

Spillages: Absorb small spills with sand or earth. Dilute the area with plenty of water.

Disposal: Dispose of the contents and the plastic bottle according to local authority regulations. Most bottles are HDPE and can be recycled once thoroughly rinsed. 6. Summary of Regulatory Symbols

When looking at the back of a W5 Thick Bleach bottle, you will typically see these GHS symbols:

The "Corrosive" Icon: A liquid pouring onto a hand and a metal bar, indicating it eats through surfaces and skin.

The "Environmental Hazard" Icon: A dead fish and a tree, signifying toxicity to nature.

Disclaimer: This article provides general safety information. Always read the physical label on the bottle you purchased, as formulations and emergency contact numbers can vary by region and batch.


GHS Classification (Globally Harmonized System)

  • H315 – Causes skin irritation.
  • H318 – Causes serious eye damage.
  • H335 – May cause respiratory irritation.
  • H400 – Very toxic to aquatic life.

SECTION 8: Exposure Controls / Personal Protection

Safety Data Sheet — W5 Thick Bleach (Fictional Narrative)

2. Hazard Identification (The “Danger” Section)

Under the CLP Regulation (EC No 1272/2008), W5 Thick Bleach is classified as a corrosive and dangerous substance. The hazard pictograms on the label and SDS typically include:

  • GHS05 (Corrosion): Indicates the product causes severe skin burns and eye damage.
  • GHS09 (Environment): Indicates it is toxic to aquatic life with long-lasting effects.
  • GHS07 (Exclamation mark): Indicates it may cause respiratory irritation.

Hazard Statements (H-statements):

  • H314: Causes severe skin burns and eye damage.
  • H400: Very toxic to aquatic life.
  • H410: Very toxic to aquatic life with long-lasting effects.
  • EUH031: Contact with acids liberates toxic gas (chlorine gas).

6. Handling and Storage

Safe handling instructions include using in well-ventilated areas, never mixing with other cleaning products (especially acids, ammonia, or organic solvents), and wearing chemical-resistant gloves (e.g., nitrile) and safety goggles. Storage requires a cool, dry, well-ventilated place away from direct sunlight, heat, incompatible materials (acids, reducing agents, organic matter), and out of reach of children. Containers must be kept tightly closed and upright to prevent leaks.

Personal Protective Equipment (PPE)

  • Eye protection: Chemical splash goggles or face shield.
  • Hand protection: Nitrile, neoprene, or PVC gloves (test for breakthrough time > 240 minutes).
  • Skin/body: Chemical-resistant apron if splashing likely.
  • Respiratory: Not normally required for household use – if heavy misting, wear a particulate mask (N95/P2).