SIM-EMU 6.02 Configurator v2.2 is a legacy software tool used to manage and configure Multi-SIM cards (typically Silver cards or Green cards based on the PIC16F876/7 and 24C64/128/256 EEPROM architecture). It allows users to store multiple GSM phone numbers on a single physical SIM card. 🛠️ Prerequisites & Hardware To use this software, you generally need:
A Programmable SIM Card: Usually a "Silver Card" or "Wafer Card."
Smart Card Programmer: A Phoenix/Smartmouse compatible programmer. Operating Mode: Most programmers must be set to 3.58 MHz.
Runtime: Windows environment (XP is most compatible; later versions may require "Compatibility Mode"). 📂 Key Features of v2.2
Multi-Slot Management: Support for up to 10 different phone positions (ADN/SMS/FDN).
PIN/PUK Customization: Ability to set independent security codes for the emulated SIM.
SMS Storage Configuration: Define how many messages are stored for each provider slot.
Phonebook Management: Edit names and numbers directly within the configurator.
STK (SIM Tool Kit) Support: Enables the on-phone menu to switch between numbers. 📝 Step-by-Step Configuration 1. Extracting Data (The "Ki" and "IMSI")
Before using the configurator, you must have the Ki (Authentication Key) and IMSI (International Mobile Subscriber Identity) for the SIMs you want to clone.
Note: Modern v2 and v3 SIM cards (Comp128v2/3) cannot be "cracked" to find the Ki. This tool only works with older Comp128v1 cards. 2. Loading the Configurator Open SimEmu602_Config_v22.exe. Select your COM Port (where your programmer is plugged in). Set the frequency (usually 3.58 MHz). 3. Filling the Positions sim-emu 6.02 configurator v2.2
Position 0-9: Input the IMSI, Ki, and SMS Center Number for each provider.
ADN/SMS: Allocate the memory space. For example, give Slot 1 more SMS storage if it's your primary number. PUK/PIN: Assign a global PIN to protect the card. 4. Writing the Files The configurator generates two main files: HEX File: For the PIC microcontroller.
BIN/EEP File: For the EEPROM memory.Use a separate software (like IC-Prog or PonyProg) to flash these files onto your Silver Card. ⚠️ Important Limitations
Security: This technology is largely obsolete. Most modern 4G/5G SIM cards are encrypted with algorithms that cannot be read by this software.
Hardware Damage: Frequent writing to wafer cards can lead to physical failure.
Compatibility: This software may not recognize USB-to-Serial adapters without specific drivers (Prolific or FTDI).
If you are trying to get this running on a modern PC, I can help you troubleshoot driver issues or COM port mapping.
SIM-EMU 6.02 Configurator v2.2 is a legacy utility used to program and manage multi-number SIM cards (often called SilverCards or GreenCards). It allows users to store up to 10 different phone numbers on a single physical SIM card and switch between them using the phone's built-in menu. Key Features
This version introduced several refinements to security and mobile compatibility:
Multi-Number Management: Configure up to 10 positions with unique IMSI and KI data retrieved from existing SIM cards. SIM-EMU 6
PIN2 Security: Configuration is now performed using PIN2 instead of the standard PIN for added security.
SMS Customization: Ability to define independent Message Center numbers (SMSc) for each of the 10 stored profiles.
Dynamic Capacity: Adjustable storage for SMS (1–99) and Phonebook entries (1–254).
Device Compatibility: Improved support for specific legacy mobile brands like Panasonic, Sagem, Philips, and Ericsson.
User Interface: Includes a "Select Phone" menu option and the ability to edit position descriptions (up to 16 characters) directly from the mobile. Usage Overview
Extraction: Users typically use a SIM reader and software like Waron Scan to extract the IMSI and KI (secret key) from their original 2G/GSM SIM cards.
Configuration: The SIM-EMU Configurator writes this data into a blank programmable card (e.g., 16F876/7 chips).
Switching: Once inserted into a phone, a new "SIM-EMU" menu appears, allowing the user to select which number to activate without powering down the device. Important Limitations
Network Compatibility: This tool primarily works with older 2G/GSM standards (COMP128 v1 algorithm). Most modern 3G, 4G, and 5G SIM cards use updated encryption (COMP128 v2/v3) that is currently unclonable using these methods.
Hardware: Requires specific programmable "Silver" or "Green" cards and an RS-232 or USB-based SIM programmer. If you'd like to proceed, I can help you with: Run Setup_SimEmu_602_Config_v22
Finding a tutorial for a specific programmer (like Phoenix or JDM)
Explaining why modern USIM/4G cards won't work with this software
Identifying the hardware requirements for building a 2G test environment Sim-Emu 6.02 configurator v2.2 - YahooM Blog
Disclaimer: This guide is based on standard industrial configuration logic for train simulators/EMUs. As specific proprietary software may vary, always refer to your official manual.
Setup_SimEmu_602_Config_v22.exe as Administrator.The SIM-EMU Configurator v2.2 is the dedicated interface for programming, calibrating, and managing the 6.02 Electric Multiple Unit (EMU) Simulation Core. This tool allows you to map hardware controls (cab desk), set train parameters (traction, braking, doors), and configure network protocols for driver training simulators.
The v2.2 configurator includes a flame graph view (similar to perf tools) showing which function blocks consume the most execution time. This is invaluable for optimizing legacy code.
Import symbol tables from STEP 7 (.sdf or .xls). v2.2 supports Unicode tags, arrays, and UDTs. You can manually add tags with data types: Bool, Byte, Word, DWord, Int, Real, String, and even Date/Time.
Even with v2.2’s robust design, users encounter issues. Here’s how to resolve the top three:
| Issue | Likely Cause | Solution in v2.2 | |-------|--------------|--------------------| | Emulation fails to start | Conflicting protocol binding | Go to Protocol Layers > Advanced > Enable Port Exclusivity Check | | High CPU usage (100%) | Script infinite loop | In Script Debugger, set Max Instructions per Cycle to 100,000 | | PLC software cannot connect | Wrong TSAP/rack/slot | Use the S7 Info Query tool (Tools > Diagnostics) to broadcast the emulated CPU’s visible parameters |
Define virtual connections:
192.168.0.100:102).