Stihl Fs96 Manual • Editor's Choice

The STIHL FS 96 is a vintage petrol-powered brushcutter that requires a 50:1 fuel-to-oil mix and regular gearbox lubrication for optimal performance. Due to the model's age, physical or digital copies of parts diagrams and illustrated parts lists are available through third-party vendors. For more details, visit DIYSpareParts.com STIHL International Website FCS-KM - STIHL

Lubricate the flexible shaft (2) with STIHL mul‐ tipurpose grease or gear lubricant. STIHL International Website Correct Fuel Mixture for Grass Trimmers | STIHL AU

We recommend using STIHL 1:50 2-stroke engine oil with petrol, at a mix ratio of 1:50 – 1 part oil to 50 parts of petrol. Stihl (FS 96) Parts Diagrams

Select a page from the Stihl FS 96 Brushcutter diagram to view the parts list and exploded view diagram. DIY Spare Parts OEM STIHL Illustrated Spare Parts List Manual FS 96 - eBay OEM STIHL Illustrated Spare Parts List Manual FS 96. FCS-KM - STIHL stihl fs96 manual

Lubricate the flexible shaft (2) with STIHL mul‐ tipurpose grease or gear lubricant. STIHL International Website Correct Fuel Mixture for Grass Trimmers | STIHL AU

We recommend using STIHL 1:50 2-stroke engine oil with petrol, at a mix ratio of 1:50 – 1 part oil to 50 parts of petrol. Stihl (FS 96) Parts Diagrams

Select a page from the Stihl FS 96 Brushcutter diagram to view the parts list and exploded view diagram. DIY Spare Parts The STIHL FS 96 is a vintage petrol-powered

To help you best, here's what I recommend:

2. Fuel and Lubrication (2-Stroke Engine)

The FS96 uses a 50:1 fuel-to-oil ratio.

Fuel: Minimum 89 octane (RON), fresh gasoline (no more than 30 days old). Ethanol-blended fuel (up to 10%) is acceptable but not preferred.
Oil: Use Stihl HP Ultra 2-stroke oil or a high-quality JASO FD or ISO-L-EGD certified oil.
Mixing: Mix in a small, clean container. Shake thoroughly before fueling.
Never use pure gasoline – this destroys the piston and cylinder instantly.

Section-by-Section Breakdown of the FS96 Manual

Once you have the document, here is how to read it like a pro. Fuel: Minimum 89 octane (RON), fresh gasoline (no

1. Product Overview

The Stihl FS96 is a professional-grade, gasoline-powered brushcutter designed for cutting grass, weeds, and light brush.

Key Components:

Engine housing & starter grip
Carburetor adjustment screws
Fuel tank (pre-mix)
Throttle trigger & lockout
Drive shaft
Cutting attachment (mowing head or blade)
Deflector / Shield
Handlebar (bicycle or loop handle)

4. Starting Procedure

Cold Start:

Place the unit on the ground.
Set the choke lever to Closed (•).
Pump the fuel primer bulb 5–7 times.
Pull the starter rope briskly 2–4 times until the engine fires briefly.
Set the choke to Open (○).
Pull the starter rope again – the engine should run.
Squeeze the throttle trigger once to disengage the starting throttle.

Warm Start: Open choke, pull starter rope (no priming needed).

📘 What a typical FS manual includes:

Safety precautions (harness, deflector, blade/line use)
Fuel & oil mixing (50:1 for Stihl 2-stroke engines)
Starting & stopping procedure
Carburetor adjustment
Replacing trimmer line or cutting blade
Air filter & spark plug maintenance
Troubleshooting (won’t start, poor power, etc.)

Fuel system

Use fresh fuel; drain fuel if storing >30 days.
Inspect fuel lines for cracks; replace if brittle.
Clean/replace in‑tank filter as needed.

Controls & parts (user-facing)

On/Off (stop) switch / ignition
Choke/Primer: For cold starts — choke closed, primer (if fitted) press 2–6 times.
Throttle trigger / throttle lock
Decompression valve (if equipped) — eases pull start.
Fuel cap / filler vent
Air filter cover / filter element
Spark plug access
Cutting guard / harness attachment point

9. Technical Specifications (Estimated)

| Specification | Value | |---------------|-------| | Displacement | ~31 cc | | Power output | ~1.1 kW (1.5 HP) | | Dry weight | ~5.5 kg (12 lbs) | | Fuel capacity | 0.5 L | | Max engine speed | 11,000 RPM (no load) |