Sunplus Box Tv 120 Update |link| May 2026

Updating the firmware on a Sunplus Box TV 120 (often labeled as a generic "LCD/LED TV Driver Board" or "Universal Main Board") can be risky. Since these boards are often used in various off-brand or assembled TVs, the firmware is usually specific to the exact LCD panel connected to the board.

Here is a comprehensive guide on how to handle the update process.

Identifying Your Current Firmware Version

To determine if you need a Sunplus Box TV 120 update, you must first know what version you are currently running. Follow these steps: sunplus box tv 120 update

  1. Power on your Sunplus Box TV 120 and navigate to the Settings menu.
  2. Scroll down to Device Preferences (or "About" depending on your Android version).
  3. Select About and then Status or Firmware Version.
  4. You will see a string of numbers like SP120_V2.3.6_20240815 or Sunplus_TV120_OTA_v3.1.

Write this number down. Then, visit the official Sunplus support forum or the retailer’s support page to compare it with the latest release. As of May 2026, the latest stable version is SP120_V3.2.1_20260410.

Method 2: Manual Update via Recovery Mode (USB/SD Card)

Use this if OTA fails or you downloaded a firmware file (.img or .zip) from the seller or a trusted forum. Updating the firmware on a Sunplus Box TV

What you need:

  • A USB flash drive (FAT32 format) or microSD card.
  • The correct firmware for your exact Sunplus Box TV 120 (using wrong firmware can brick the device).

Steps:

  1. Copy the firmware file (e.g., update.zip or sunplus120.img) to the root of the USB/SD card.
  2. Insert the card into the TV box.
  3. Enter Recovery Mode (method varies by box):
    • Unplug power → press and hold the reset button (small hole inside AV port or on side) → keep holding while plugging power back in.
    • Or use a toothpick to press the reset button while powering on.
  4. Once in recovery menu (blue/yellow text), use the remote/arrow keys to select:
    • Apply update from EXT → choose your USB/SD drive → select the firmware file.
  5. Wait for the update to finish (2–5 minutes). The box will reboot automatically.

Troubleshooting Common Issues

| Issue | Solution | |-------|----------| | “Update not found” | Your box may be a clone or the server is down – try USB method. | | Stuck on boot logo | Unplug for 30 sec, then USB reflash using reset button method. | | Apps crash after update | Clear app cache: Settings → Apps → [App] → Clear Cache. | | Remote not responding | Re‑pair Bluetooth remote or replace batteries. |

Scroll to Top