Tp.sk513s.pb802 1920x1080-1g-8g-onvo-usb.part3.rar !full! May 2026
This file refers to a firmware package for the TP.SK513S.PB802
motherboard, a "three-in-one" smart TV mainboard commonly used in ONVO brand LED televisions and other similar generic Smart TVs. Board Overview & Performance
Hardware Specifications: The "1G-8G" in the filename indicates 1GB of RAM and 8GB of internal storage (eMMC), which is the standard entry-level configuration for these boards.
Operating System: Most variants of this board run Android 11, providing a smart interface for streaming and apps.
Resolution Support: This specific firmware is configured for 1920x1080 (Full HD) displays. Using it on a 1366x768 (HD) panel without adjustment may result in display distortion or a failure to boot.
Power Configurations: These boards typically come in two power versions: 65W or 48W, often used for 32" to 43" television models. Use Case & Reliability
Restoration Tool: This firmware is primarily used to fix "boot loop" issues where the TV is stuck on the Android logo or won't turn on.
Professional Requirement: Retailers like AliExpress and eBay explicitly warn that these boards and their firmware are for professional electronic technicians. Installation often requires adjusting screen parameters or swapping data chips.
File Structure: The .part3.rar indicates this is the third part of a split archive. You will need all parts (usually Part 1 and Part 2 as well) in the same folder to successfully extract the .bin or .img firmware file for USB installation. Technical Summary Specification Board Model TP.SK513S.PB802 Memory/Storage 1GB RAM / 8GB eMMC Native Resolution 1920 x 1080 Primary Brand Android Version Android 11
Ready to create a quiz? Use Canvas to test your knowledge with a custom quiz Get started The file you mentioned, TP.SK513S.PB802 1920x1080-1G-8G-ONVO-USB.part3.rar
, is a specific part of a firmware package used for repairing or updating the brand Smart TV. Technical Overview This firmware is designed for the TP.SK513S.PB802
motherboard, a common "three-in-one" TV mainboard that integrates the power supply, LED driver, and TV signal processor. AliExpress Board Model : TP.SK513S.PB802 (N/T variants) Resolution Support : 1920x1080 (Full HD) Hardware Specs : 1GB RAM and 8GB Internal Storage (eMMC) : Typically runs on Android 11 Backlight Power
: adjustable depending on panel requirements, often around 34–110V Usage Context extension indicates a compressed file, and
means it is one of several required pieces. To use this firmware, you must have all parts (part1, part2, etc.) in the same folder to extract the final
This file appears to be the third part of a multi-volume RAR archive containing the USB firmware for a television using the TP.SK513S.PB802 motherboard. This specific firmware is tailored for brand TVs with a Full HD (1920x1080) resolution. Technical Specifications Based on the motherboard model and file naming convention: Main Board: TP.SK513S.PB802 (a common "three-in-one" Smart TV board). Resolution: 1920x1080 (Full HD). 1GB RAM and 8GB internal storage (eMMC). Typically runs Android 11 Specifically optimized for File Details Archive Type: Multi-part RAR (.part3.rar). You
have all preceding and succeeding parts (part1, part2, etc.) in the same folder to extract the firmware successfully. Source/Usage: Often found on repair forums like KenotronTV for recovering "bricked" TVs or fixing software loops. Standard Recovery Procedure If you are using this to repair a TV:
Ensure you have all parts. Extracting "part1" will automatically pull data from "part3" if they are together. Prepare USB: Format a USB drive to Place the extracted file (often named allupgrade_...pkg or similar) onto the root of the USB drive. With the TV unplugged, insert the USB. Hold the physical
button on the TV and plug in the power cord. The TV should enter an update mode (often indicated by a blinking LED). TP.SK513S.PB802 1920x1080-1G-8G-ONVO-USB.part3.rar
Using firmware for the wrong panel resolution (e.g., trying to use 1080p firmware on a 720p panel) can result in a "black screen" or distorted image. Do you have the other parts of this archive, or are you looking for the full single-file version
This file is a split archive part of the USB-upgradable firmware for an ONVO Smart TV using the TP.SK513S.PB802 motherboard. This specific firmware is configured for a Full HD (1920x1080) resolution display with 1GB of RAM and 8GB of internal storage. Technical Specifications
Mainboard Model: TP.SK513S.PB802 (Commonly used in ONVO, Erisson, and Hartens TVs). Operating System: Typically runs on Android 11. Resolution Support: 1920x1080 (Full HD). Hardware Config: 1GB DDR RAM / 8GB eMMC Flash.
Functionality: Three-in-one board (Power, Backlight Driver, and Logic Board integrated). File Usage & Extraction
This is Part 3 of a multi-part RAR archive. You cannot use this file alone.
Requirement: You must have all parts (e.g., .part1.rar, .part2.rar, .part3.rar) in the same folder.
Extraction: Use a tool like WinRAR or 7-Zip. Right-click Part 1 and select "Extract Here" to merge them into a single .bin or .img firmware file.
Application: This file is generally used for USB Recovery when a TV is stuck on the logo, restarting, or has a corrupted OS. Installation Instructions (USB Method)
Format Flash Drive: Use a high-quality USB drive formatted to FAT32.
Copy File: Place the extracted firmware file (usually named allinstall.bin or similar) into the root directory (not inside any folder). Initiate Update: Unplug the TV from power. Insert the USB drive into the USB 2.0 port. Press and hold the Power button on the TV (not the remote).
Plug the TV back into power while continuing to hold the button.
Release when the "Upgrading" or "Software Updating" screen appears.
Wait: Do not power off the TV until it finishes and restarts automatically.
Caution: Installing the wrong firmware version (e.g., 1080p firmware on a 720p panel) can cause a distorted or "solarized" image. Always verify your TV panel model before flashing.
This report covers the firmware package TP.SK513S.PB802 1920x1080-1G-8G-ONVO-USB.part3.rar
, which is a specific software update for a common Android-based LED TV motherboard. Product Overview
The file is the third part of a multi-part compressed archive containing the USB upgrade firmware for the TP.SK513S.PB802 This file refers to a firmware package for the TP
motherboard. This board is a "three-in-one" design, meaning it integrates the power supply, LED backlight driver, and TV mainboard into a single PCB. AliExpress Technical Specifications
Based on the file name and hardware documentation, this firmware is configured for the following hardware profile: Resolution:
1920x1080 (Full HD). Installing firmware with the wrong resolution can lead to a distorted image or a "no display" condition. Memory (RAM): Storage (ROM): Brand/User Interface:
, suggesting this software is customized with the ONVO brand logo and settings. Update Method: , intended for recovery or updates via a flash drive. AliExpress Hardware Compatibility TP.SK513S.PB802
board is used in various budget and mid-range Smart TVs (often 32" to 43") from brands like ONVO, Erisson, and Hartens. Power Input: Typically supports backlight voltages from 34V to 110V. Usually runs on Android 11 AliExpress Installation Warnings Multi-part Archive: This specific file is
. You cannot extract the firmware unless you have all preceding parts (part1, part2) in the same folder. Professional Use Only: Technicians from AliExpress
warn that if you are not a professional, you should avoid manual firmware updates. Installing the wrong software can "brick" the motherboard or damage the panel. Screen Parameters:
Even if the model matches, screen parameters (like LVDS mapping) might need adjustment in the service menu after installation. AliExpress Do you need instructions
on how to properly combine these .rar parts or a guide on entering the service menu for this board?
Because the filename contains terms like PB802, ONVO, and USB, this is almost certainly a system firmware file split into multiple parts.
Here is a helpful essay/guide on what this file is, why you likely need the other parts, and how to use it safely.
File details
- Filename: TP.SK513S.PB802 1920x1080-1G-8G-ONVO-USB.part3.rar
- Type: RAR multi-part archive segment
- Likely contents: firmware, OS image, or media files optimized for 1920×1080 devices with 1G/8G memory configs and USB install method
6. Troubleshooting Common Errors
| Error Message | Likely Cause | Solution | |---------------|--------------|----------| | “Need next volume” | Missing part4.rar or part2.rar | Locate all parts. | | “CRC failed” | Corrupted part3.rar | Re-download just part3 from original source. | | “Unexpected end of archive” | Incomplete download | Check file size (should match source). | | “No files to extract” | Missing part1.rar (the header) | Always extract starting from part1.rar, not part3. |
Understanding and Handling the File: TP.SK513S.PB802 1920x1080-1G-8G-ONVO-USB.part3.rar
8. Conclusion
TP.SK513S.PB802 1920x1080-1G-8G-ONVO-USB.part3.rar is not a standalone file — it’s the third volume of a compressed firmware or driver archive for a 1080p touch device with 1 GB RAM and 8 GB storage, likely an Android head unit or USB monitor controller.
To use it:
➜ Find part1 and part2.
➜ Extract with 7-Zip/WinRAR.
➜ Read included instructions carefully.
➜ Verify hardware compatibility before flashing.
If you only have this single part, the download is incomplete — go back to the source and retrieve all volumes. Never rename or modify the .part3.rar extension, or the archive won’t reassemble correctly.
Need further help? Provide the exact device name (if known) or the website where you found this file, and I can offer more specific guidance.
It looks like you're searching for a specific firmware file for the TP.SK513S.PB802 File details
smart TV motherboard, specifically a version tailored for ONVO TVs with 1080p (Full HD) resolution and 1GB/8GB memory specs.
The file name you provided (.part3.rar) suggests this is the third part of a multi-part archive. Since you mentioned "solid story," you are likely looking for the file on SolidStory, a popular forum for TV technicians and firmware enthusiasts. Finding the Firmware
To successfully install this firmware, you need all parts of the archive (Part 1, Part 2, etc.) in the same folder before extracting. You can typically find these files on specialized technician sites:
SolidStory: This forum often hosts specific TV brand dumps (like ONVO, Nordmende, or Sunny) that use the TP.SK513S.PB802 board. You may need a registered account to view download links. Manuals Plus
: While they mostly provide manuals, they offer technical specs for the TP.SK513S.PB802
(T) which can help confirm if your hardware matches the firmware. Quick Technical Checklist Before you flash this via USB:
Resolution Match: Ensure your TV panel is actually 1920x1080. Flashing a 1080p firmware on a 720p (1366x768) panel can result in a distorted image or a black screen. USB Preparation: Format your USB drive to FAT32.
File Naming: After extracting all parts, the resulting file (usually ending in .bin or .img) might need to be renamed to allupgrade_513s.bin or similar, depending on the board's boot instructions.
Are you trying to fix a boot loop ("Smart TV" logo hang), or are you replacing a broken screen and need to change the resolution? AI responses may include mistakes. Learn more
5. How to Flash/Install on the ONVO Car Head Unit
This is not for a PC — it’s for updating the car’s touchscreen display. Proceed with caution.
9. How to Search for More Information
If you’re trying to find the other parts or documentation:
Effective search strings:
"TP.SK513S" ONVO firmware
PB802 1920x1080 update
SK513S 1G 8G head unit
ONVO USB firmware part1.rar
Forums to check:
- XDA Developers (Android Auto section)
- 4PDA (search for “ONVO авто”)
- Reddit: r/CarAV, r/NIO (for ONVO-related)
- Chinese sites (Baidu Tieba, ZhiHu) as many head units are from Shenzhen factories.
Scenario A: It's Legit (10% chance)
You own a "Generic ONVO USB Stick" with 8GB storage. You download parts 1, 2, and 3. You use PhoenixUSBpro to flash it. Your bricked device comes back to life. Happy ending.
The ".part3.rar" Warning
The most critical part of this filename is the extension: .part3.rar.
This file is not a standalone firmware package. It is part number 3 of a multi-volume RAR archive (usually split into parts to make downloading easier or to fit size limits).