Tsc-407 Datasheet [repack] 💯 Must Try

However, in the electronics industry, "TSC-407" is most commonly associated with a specific LCD display module manufactured by Truly Semiconductors, rather than a standard logic chip (like a timer or voltage regulator).

Below is a detailed overview of the Truly TSC-407 LCD Module, which covers the typical specifications found in its datasheet. tsc-407 datasheet

Section 2: Absolute Maximum Ratings (Critical Section of the TSC-407 Datasheet)

Ignoring this section can destroy your device. The absolutemax ratings table typically specifies: However, in the electronics industry, "TSC-407" is most

• Supply Voltage (V+ to V-): 6.0V maximum (for single supply, V- to GND).
• Analog Input Voltage Range: V- – 0.3V to V+ + 0.3V.
• Digital Input Voltage Range: GND – 0.3V to V+ + 0.3V.
• Continuous Current (any switch pin): ±30mA to ±100mA (check the exact figure).
• Peak Current (pulsed): ±150mA.
• Storage Temperature: -65°C to +150°C.
• Junction Temperature: 150°C maximum.

Design Rule: Never exceed these values, even transiently. Overvoltage on an analog input can latch up the CMOS structure. Section 2: Absolute Maximum Ratings (Critical Section of

Troubleshooting checklist

• No I2C response: check pull-ups, correct address, and VDD voltage.
• Erratic readings: verify decoupling, ground return paths, and ADC input configuration.
• ALERT never triggers: confirm threshold/hysteresis settings and ALERT pull-up/polarity.

Section 1: TSC-407 Key Features (From the Datasheet)

The datasheet opens with a list of headline features. For the TSC-407, you can typically expect:

• Low On-Resistance (R_ON): Typically 4Ω to 10Ω maximum at 25°C.
• Flatness: On-resistance flatness over the specified signal range (often <1Ω).
• Low Leakage: nA-level leakage currents (e.g., ±0.1nA typical).
• Wide Operating Voltage: Single supply from +1.8V to +5.5V, or dual supplies like ±2.5V.
• Fast Switching: t_ON / t_OFF in the 20-50ns range.
• Break-Before-Make Switching: Prevents momentary shorts when toggling.
• ESD Protection: Typically 2kV HBM (Human Body Model) on all pins.
• Package Options: SOIC-16, TSSOP-16, or QFN-16.

TSC-407: Overview, Key Specs, and Practical Applications

The TSC-407 is a compact temperature-sensing controller designed for low-power embedded systems and industrial monitoring where accurate, reliable temperature measurement and simple interfacing are required. This post summarizes the device’s main features, typical electrical characteristics, pinout and timing details, recommended interfacing practices, example circuits, firmware tips, and common use cases — giving engineers a fast reference for evaluating the TSC-407 for designs.