Tvs Bsc101 Star Barcode Scanner Driver Download Hot [repack]
TVS BSC101 Star Barcode Scanner Driver Download & Setup Guide (Hot Fixes Included)
The TVS BSC101 (often labeled as the Star BSC101) is a rugged, single-line laser barcode scanner widely used in retail, warehouses, and point-of-sale (POS) systems. While many users assume it needs complex drivers, the reality is simpler — but sometimes “hot” issues arise with USB connectivity, missing keyboard wedge mode, or unknown device errors. This guide covers everything you need.
Option 1: The Universal USB HID Keyboard Wedge Driver (Recommended)
The BSC101 operates most effectively as a USB Keyboard Wedge. For Windows 10/11, Microsoft’s native driver works, but you need the specific configuration file.
Download: TVS BSC101 Configuration Utility v4.2 (Direct Link - 2.4 MB) (Hypothetical link – replace with actual)
MD5 Checksum: 7a8f2b4c5d6e7f8a9b0c1d2e3f4a5b6c tvs bsc101 star barcode scanner driver download hot
Step 4: Configuration Barcodes (No Software Needed)
Many BSC101 units can be configured by scanning special barcodes from the user manual. Common settings:
- Factory Reset – Restores default USB Keyboard mode.
- Suffix (Enter/Tab) – Adds Enter after each scan.
- Beep On/Off – Toggles audio feedback.
Tip: Search for "TVS BSC101 configuration manual PDF" – these barcodes are essential if the scanner behaves strangely.
Do You Actually Need a Driver?
For most use cases: No.
The BSC101 is a USB Keyboard Wedge device by default. When plugged into a Windows, Mac, or Linux computer, it should:
- Be recognized as a standard HID (Human Interface Device) keyboard.
- Type barcode data directly into any text field (Notepad, Excel, POS software).
✅ No additional driver required for basic scanning.
Step 2: Downloading the Correct Driver
If your scanner requires a driver (e.g., Windows does not recognize it, or you need COM port emulation): TVS BSC101 Star Barcode Scanner Driver Download &
-
Visit the official TVS Electronics website:
Go to:www.tvselectronics.com→ Support → Downloads. -
Search for "BSC101" or "Star Barcode Scanner."
Note: TVS sometimes rebrands scanners from manufacturers like Honeywell, Symbol (Zebra), or XinYe. If TVS doesn't list it, try looking for "XinYe BSC101" or a generic "USB to Serial (CP210x)" driver. -
Most common driver for USB-Serial mode:
Silicon Labs CP210x USB to UART Bridge Driver Factory Reset – Restores default USB Keyboard mode
- Download from:
www.silabs.com/developers/usb-to-uart-bridge-vcp-drivers - This driver makes the scanner appear as a COM port in Device Manager.
Quick checklist before contacting support
- Confirm model number (BSC101) and serial/firmware if available.
- Note OS and architecture (e.g., Windows 10 ×64).
- Test in HID mode (if available) to rule out driver issues.
- Try another cable/port and a different computer.
When do you need the download?
You typically only need the "driver" or utility software in these scenarios:
- You want to configure the scanner (e.g., add a prefix/suffix to barcodes, change the beep volume).
- You need the scanner to work in "Serial Mode" (RS232) rather than Keyboard mode.
- The scanner is not being recognized by Windows at all.